Thank you very much for making this easy to follow guide. I followed it and while I got a connection and handshake I didn't have an IP address for some reason and therefore couldn't connect to anything. To fix this, I added another line on the Windows wireguard config under [Interface] and put in MTU = 1340 underneath where the DNS servers are listed and suddenly I had my IP and a connection. I since then increased the MTU a bit to 1390 and it still works for me, but YMMV. Something to try if anyone is faced with a similar situation, hope it helps.
You don't need to transfer over the peer's private key into the server's config. Private key is to remain private on the client side. The only reason there is an input filed for it in the LuCi WG UI is if you want LucI to generate public/private key pair for your peer. So that you could transfer it over to your peer from the server and after that wipe it out in LuCi.
Hi, I was using your guide but when I connect to VPN, there is no internet connection. I'm using the DDNS and ISP modem connected to Openwrt router thru DHCP.
Ví dụ router openwrt của mình là lớp router thứ 2, lớp đầu tiên là của nhà mạng không can thiệp vào được, k mở đc port thì có làm đc theo hướng dẫn này không ạ
Hi admin, cho tôi hỏi là tôi có làm theo y vậy, đã kết nối được vpn, nhưng khi truy cập mạng Lan thì báo là không kết nối được, block bởi Firewall, thì có làm như thế nào để truy cập vào Lan được nhỉ. Tks ad!
I have ADblock service installed on the Openwrt . I suppose for it to work you would specify openwrt IP as a DNS for wireguard ? Would you then also need to port forward UDP or that goes over the same port ? I use Dynu for dynamicDNS, works great Also what software did you use for voice? And lastly ,you created folder wireguard, but didn't use it
is this tutorial with public ip address provided by the isp? watch the video but newbie and cant understand can this be used without public ip address provided by the isp?
Why do you have a port forward to your LAN gateway for this? The VPN should listen on the WAN interface and you can connect direct to that public IP. Your are forwarding the VPN connection to your LAN address which doesn't seem very secure IMO.
The voice-over could also be text to speech synthesis because the author may not be a native English speaker, and his spoken English may not be fluent. Let's please focus on the content.
Thank you very much for making this easy to follow guide. I followed it and while I got a connection and handshake I didn't have an IP address for some reason and therefore couldn't connect to anything. To fix this, I added another line on the Windows wireguard config under [Interface] and put in MTU = 1340 underneath where the DNS servers are listed and suddenly I had my IP and a connection. I since then increased the MTU a bit to 1390 and it still works for me, but YMMV. Something to try if anyone is faced with a similar situation, hope it helps.
You don't need to transfer over the peer's private key into the server's config. Private key is to remain private on the client side. The only reason there is an input filed for it in the LuCi WG UI is if you want LucI to generate public/private key pair for your peer. So that you could transfer it over to your peer from the server and after that wipe it out in LuCi.
Hi, I was using your guide but when I connect to VPN, there is no internet connection. I'm using the DDNS and ISP modem connected to Openwrt router thru DHCP.
Very interesting !!! and about production videos/animations, very good.....great job one more time 👍
Ví dụ router openwrt của mình là lớp router thứ 2, lớp đầu tiên là của nhà mạng không can thiệp vào được, k mở đc port thì có làm đc theo hướng dẫn này không ạ
Hi admin, cho tôi hỏi là tôi có làm theo y vậy, đã kết nối được vpn, nhưng khi truy cập mạng Lan thì báo là không kết nối được, block bởi Firewall, thì có làm như thế nào để truy cập vào Lan được nhỉ. Tks ad!
Amazing Video. Thanks a lot
Press “a” before you paste the text to vi. It will change the mode to append a you will not miss the beginning of the config after you paste.
I have ADblock service installed on the Openwrt . I suppose for it to work you would specify openwrt IP as a DNS for wireguard ?
Would you then also need to port forward UDP or that goes over the same port ?
I use Dynu for dynamicDNS, works great
Also what software did you use for voice?
And lastly ,you created folder wireguard, but didn't use it
Thank you this helped so much!!!
Thanks Bro
Welcome
Thank you, Excellent, 👌
Thank you too!
is this tutorial with public ip address provided by the isp? watch the video but newbie and cant understand
can this be used without public ip address provided by the isp?
Why do you have a port forward to your LAN gateway for this? The VPN should listen on the WAN interface and you can connect direct to that public IP. Your are forwarding the VPN connection to your LAN address which doesn't seem very secure IMO.
I hope you are the next Avenger. "IT MAN"
do i need to have 1st a public ip?
.
Yes
Hi how are you, I am from Bangladesh, I watch your videos regularly, I want a network monitor from you that can monitor Rx/Tx power of Switch.
Thanks for the help
tp-link dùng đc ko ô anh?
.
Thanks ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
那什么，密钥对在webUI里就可以一键生成，peer的也一样，而且peer的配置填好后可以显示成二维码，然后扫码就完事了，不用自己在客户端一条一条的填。😂😂😂
Sir please 🙏 how to fiend 1 videos' Dublicate IP conflict Adress
please give to openwrt redus server in old router.
🎉
через putty не коннектится(( просто закрывается он
.
AI generated content thumbs down
The voice-over could also be text to speech synthesis because the author may not be a native English speaker, and his spoken English may not be fluent. Let's please focus on the content.