That’s what I thought granted he has some overhang to pull up on to get it up as well as he is most likely sanding the top of that thing anyway so slight imperfections won’t effect it
I would have put the grain on the round disc in-line and lengthways with the table top, not at an angle. Altogether a lovely piece of work and the bow-ties.
If you’re making something to sell or to gift … you really don’t want it to come apart, right? This gives solid adhesion without a doubt - you have glue sticking to the wood and glue sticking to the glue, and when assembled just a tiny bit of squeeze out. I’d say it was the perfect amount 😉
I though glue is not that strong by itself, and the less glue is used the better. Its not epoxy resin. I mean, it should be a thin layer and good force applied
serious question.. why so much glue?? it just feel like the glue isn't doing its job properly if you need drown the piece you're putting together with glue..
Hammering sound was awesome!
Glad you liked it!
😊
sounded like the teen titans go intro
It needed a little more glue
just what i was thinking
😅😅
Just a bit more
Rather have too much than not enough
most dont use enough
Every time I see one of these I reminded of how little wood glue I use haha
😁
Don't be cheap with the glue brother!
@@LokiMacGuyver exactly. it's gotta be soaking wet. Dripping. Only then can you hammer the wood in!
I cant stop watching because of the sound the mallet makes.... Its been 3 days 🥴
Wood working sounds are always pleasing
Todo un MAESTRO 👍👏
Add more glue you don’t want gravity pulling that thing out of there
Awsome work as usual 😎
Art teacher appears
ONE DOT IS A LOT
No I hate those people so much, one dot at each corner , nah it’s all or nothing
@@louissinon6868over use of glue, you really actualy DO NOT need that much
@@ZombieWolf2113I mean the glue sticks you get in primary school. 6-7 years old. And an annoying teacher
Pretty slick
👍👍👍 Still love watching you making stuff. Can we also see more of the final products on these shorts? 🤜🤛
Thank you very much. I will share when it is complete 🙌👏
Can I just come to your workshop and watch you work? I think it will help me, like therapy😊
😁
You can come to ours 😊
@@Wood-Club aww nice. Where?
@@yanleoshay we are based in the uk
I love that!!
Was this for structural support or cosmetic cuz either way it looks great 😲
I guess you need more glue.
The hammering sound was something straight out of an Old Skool video game 😂
Wow good job awsome thank you for everything
Hammering sound was awesome ❤
Found my new ringtone!
I really like your wood tool. These are so useful. I bet you are a really careful and talent carpenter
You are my favorite youtuber right now. Love your vids.
How do you work so fast and not make mistakes 😊
I do make mistakes 👍👍
wow. so nice, l love It
Love it
My sleeves got covered in glue just watching that
I think it needs more glue 😂
I think I just really liked the unexpected sound effect.
just glued the 4by4 to it at the end
That’s what I thought granted he has some overhang to pull up on to get it up as well as he is most likely sanding the top of that thing anyway so slight imperfections won’t effect it
I was thinking the same thing! I would have used a thin strip of wax paper or a silicone mat!
Surely he set a timer. But I did find that a bit odd.
There's more to life than wood glue
Basically the base wood is firewood.
Anyone who paints art or is a wood worker us the king or queen period ❤❤❤❤
Dude I think you didn’t use enough glue
I think it needs more glue.
Only thing I do different is put waxpaper over the plug so as not to stick 😮😂❤
🙌
That blank must've heard some funny jokes, 'cause it cracked quite a bit
Reminds me of that game one game when you collect the coins
Thats the good way, enough glue on both surfaces. ❤
Very good
I don't think ya put enough glue on it.😊
Not an expert.... but was alll that glue neccesary?
Bro just used the whole bottle 😂
Lmaoooo the hammering😂😂😂😂
Enjoyed the flating bit but I understand bow ties and the other beauty you got but what structure does it add or just patching a bad spot ?
I would _like_ to be impressed....
Wet it or dampen it with a lil bit of water and it will activate the titebond wood glue quicker
Love it when people use glue as a filler for bad fitting pieces
Check the grain on that 1 again before shipping
Guess I'm gonna go buy stocks in that glue company. Gonna make a fortune off this guy
Mooooore Glueee
What's he doing? There is still glue in the bottle.
Perfect no one will notice the lil knots in the wood now
Yes I like watching you but I'd rather have regular length videos instead of shorts
Use less glue and hit it with mist just before hammering it down. Cures faster and holds better FYI.
Psst do be shy add some more😉
😂😂😂
How much glue? Good job you're sponsored
That's a whole lotta sauce
Invisible repair 🤗
🤣 I like using different wood to add character
That’s what she said.
cool but I might have matched the grain direction a little better
what was that flinstone ass noise when you hammered it in and why can’t i stop listening to it🤣
Ya know what, wood glue is up there with the best of them 😮
You forgot salt,pepper and mustard.
Min request serial killer kontennya, creepy story gitu
should add a speaker there! or epoxy mini pool with toy fish inside :)
I would have put the grain on the round disc in-line and lengthways with the table top, not at an angle. Altogether a lovely piece of work and the bow-ties.
Bro did extra for no reason 😂
i would want to use that deformation for something, depending on what this piece of wood is for.
Muy bueno
Now that's what I call a sticky situation
Why would you use anything but Titebond III on anything?
I prefer Titebond II unless I heed it to be a little more waterproof! In my uses Titebond II holds better!
Not necessary
How much glue do you need?
Him: YES
Please show us the finished product.
I will 👏
道具⁉️😮が、有る❗ことに感謝‼️😂
Didn't you see the grain of the wood? I would rotate it a little bit... for better grain line up.
Do you really need that amound of glue?
👍 Key thing is just having enough glue for the joint.
If you’re making something to sell or to gift … you really don’t want it to come apart, right? This gives solid adhesion without a doubt - you have glue sticking to the wood and glue sticking to the glue, and when assembled just a tiny bit of squeeze out. I’d say it was the perfect amount 😉
I though glue is not that strong by itself, and the less glue is used the better. Its not epoxy resin. I mean, it should be a thin layer and good force applied
@@RuslanPanasyuk
That would be assuming that you have 100% contact
Need to put inductive charger in that place
serious question.. why so much glue?? it just feel like the glue isn't doing its job properly if you need drown the piece you're putting together with glue..
Did he just clamped a 4x4 directly onto the glue?😮
I don’t feel he used enough glue somebody get this man more glue
I dont think there ia enough glue
Dude, i learned about glue in kindergarten
😎 cool
How much expansion can you expect with that disc? I assume minimal.
Missed a spot
Do you own the glue company.
It may need another pint of glue.😮
🇬🇧🍻
Are you sure you used enough?
You are going to glue your clamping board down if you don’t have a piece of plastic between them. Looks good though
Just Tap it In, Give it a Little Tappy, Tap Tap Taparoo!
🤣🤣
Nice happy gilmore reference
It’s all in the hips.
Viel hilft viel 😂
my carpentry teacher used to say, "there is no such thing as too much glue" I am sad to say that he is now wrong
That sound gave me ptsd of temple run
Dusty Lumber Co x TITEBOND
Why the hammering sounds like temple run coin collecting?
Man titebond iii is the epitome of wood glue, use gallons of the stuff.
Filling it with clear epoxy would be so much better
❤❤
Hey man do you sell those dusty lumber shirts?
You could have aligned the grain, quality counts every time. Even if it's underneath. Take pride, get better.
That glue will never dry in there.
you just ruined the whole slab
It its not for structural reasons that
Giant disc just looks goofy
just ruined the whole slab