Hi Matt! Thank you for the awesome video. Very well made and clearly explained. Makes a world of difference to those for whom, like me, this kind of work doesn't come easy. One little thing though. The cut list calls for two 20" pieces of 2x6 plus two 17" pieces. That amounts to 74 inches . You recommend a 72" 2x6. I just went ahead and bought an 8ft board at the store instead of the 6ft. Anyhow, great little table. Now everyone of my non-manual friends thinks I'm a house builder!😂
As always, a great build, demonstrated in a very easy to follow format. I have some scrap lumber I am going to use to try to make one of these this week!
Great little plan brother! You need to do a video on them sweet Adirondack chairs!! I do believe you were putting the power pro screws in your pocket holes, am I right? If so how are they working out. I won't tell Kreg Co. that you're not using their screws....lol!
Thanks Kevin! I would have but I was totally winging the chairs! 😆 And yep, I never use the Kreg screws and everything holds up fine as long as you don’t over sink them.. maybe kreg will hook me up with some of theirs! Ha!
@@mmcc_woodshop6288 Yeah I hear ya!!! I'm really sick of paying $20 for 250 screws! It's $28 for 250 if you get them from the blue and orange stores!!!! I build full time and I can afford it but I'd rather find a cheaper alternative and put that money somewhere else. After all we know the joint gets it's main strength from the glue! I appreciate you brother, great video.
Digital plans including full dimensions and cut lengths are now available at the following link!
mmccwoodshop.etsy.com/listing/1736676753
Alright.
Your cuts are pretty darn accurate for not using a stop block. Mad Skilz man!!!!
Thanks buddy! I can usually get them pretty close now. We just won't take about all the times I was off by 1/2" 😂
Hi Matt! Thank you for the awesome video. Very well made and clearly explained. Makes a world of difference to those for whom, like me, this kind of work doesn't come easy. One little thing though. The cut list calls for two 20" pieces of 2x6 plus two 17" pieces. That amounts to 74 inches . You recommend a 72" 2x6. I just went ahead and bought an 8ft board at the store instead of the 6ft. Anyhow, great little table. Now everyone of my non-manual friends thinks I'm a house builder!😂
Thanks for watching and the feedback, I fixed the error you mentioned - appreciate the heads up on that!
Very nice little table
Thanks James!
Simple and beautiful and awesome piece mr Matt keep teaching us hiw to build those amazing pieces.👍👊
Thanks Diego! Appreciate the kind words!
As always, a great build, demonstrated in a very easy to follow format. I have some scrap lumber I am going to use to try to make one of these this week!
Nice!! Thanks for the feedback and good luck with your build! 👍🏻
Good job and project thx for sharing
Thanks Larry!
Yeah...I dont have one of those saw but I will try my best
Sweet, good luck with your build and enjoy! 👍🏻
Awesome
Thank you 🙏🏾
Thanks for watching!
Great little plan brother! You need to do a video on them sweet Adirondack chairs!! I do believe you were putting the power pro screws in your pocket holes, am I right? If so how are they working out. I won't tell Kreg Co. that you're not using their screws....lol!
Thanks Kevin! I would have but I was totally winging the chairs! 😆 And yep, I never use the Kreg screws and everything holds up fine as long as you don’t over sink them.. maybe kreg will hook me up with some of theirs! Ha!
@@mmcc_woodshop6288 Yeah I hear ya!!! I'm really sick of paying $20 for 250 screws! It's $28 for 250 if you get them from the blue and orange stores!!!! I build full time and I can afford it but I'd rather find a cheaper alternative and put that money somewhere else. After all we know the joint gets it's main strength from the glue! I appreciate you brother, great video.
No kidding! That’s why I go with the other ones. Just made sure the screw itself is decent, the heads will snap right off the tops of some brands
nice
Thanks!
Never get dimensions from anything below so please put them in your video
Hi Dan, the dimensions are available in the plans on my Etsy site, which is listed in the description 👍🏻