Thank you for not damaging such nice limited unit. As much as i apreciate youtubers doing durability tests. I hate when you can't get your hands on a limited edition item to then watch it be thrown at a rock on a video. Lol
I have just ordered a Warrior Pro for my tactical kit as I work in Security at night mostly my current torch is ok but ok is all it is. I need something that throws light out over a big area for my job.
I purchased the warrior x last year in black and was delighted with it until I later found out they did it also in FDE colour! 😢😢😢No complaints about the light whatsoever though it’s a great light - I think I’d only upgrade to the x pro if I can no longer do without a tan coloured flashlight (which will likely happen) 🤣🤣🤣
I have been tempted to get this light for a while now. I like the design: it screams for taking it out in the wilderness! This seems really to be a robust light able to take a lot of beating without problem. A light you will not be worried when it gets some scratches or so. It's made for real use! I like the simple user interface with two modes: low and high. That's it. Not even strobe which is so common with lights today. Good: I would not miss it. But I am doubtful about the high mode: it's a bit too high. Every time you turn the light on at high it will pass through the 2250lm before the stepdown to lower level. It should be 1000-1200lm mode instead. Or a possibility to get something between as well, without the short burst at 2250lm(whether you want it or not) every time you want a higher brightness than 300lm. The runtime at low mode is good and stable and 300lm is a adequate brightness for most tasks. But if repeatably put on turbo the 2250lm will eat the battery and runtime so the runtime at low mode eventually will be significantly shortened. I welcome comments from users of Warrior X Pro!
It appears that the pressure switch is just "momentary," is that true? (It must be held to keep the light on?) And with the pressure switch, we jump immediately to max power level (no other options, correct?)
I could not find information on their site on the controls/operational modes, and I can see why. There is only the full blast mode, and also a low-beam "flash" mode, and no control over beam width. I was expecting more functionality for the price. Elsewhere you can get sophisticated operational modes and very adequate lumens for less money. With the 'tactical ring' installed, in spite of the spikey looks, the light will roll off of the table, or hood of car. This is just a powerful, non-adjustable beam. If that is what you need, there you go.
No quality flashlights have "adjustable'' beams, wtf are you talking about? and there are only two modes high-constant, high-momentary and low-constant- and low-momentary. no "flash mode".........
I did to but paid no attention and the switch that mounts to a gun with a different light and I will say the i3 i think it replace my current edc pocket light i like it a whole lot better
Yes, it's thermally regulated to step down to 1,000 lumens for another 100 mins unless it cools down, then you can turn it back on to 2250. That's a lot of heat it generates at 2250 lumens!
mAh means milliamp HOUR. It is a capacity, not a current rating. 5000 milliamps would be incredibly hot for a device this size. Important difference. The h is there for a reason. K rant over.
Thank you for not damaging such nice limited unit. As much as i apreciate youtubers doing durability tests. I hate when you can't get your hands on a limited edition item to then watch it be thrown at a rock on a video. Lol
I have the Warrior x pro in Camo, love this light.
5000 OD green made worldwide...4,900 given to UA-cam channels 🤨
Lol
I ordered the bundle in OD green plus a UV light and a bunch of freebies. They sold out of OD Green
I got one in od green and I am not a UA-camr but I understand your comment
I've got this in red and I love it. It's used for work (Truck driver) and I take it camping when I get up go.
Woooo just received my Dessert Tan pro X!!!! Amazingggggg.
Love the green !!! Looks like it is a great light
I have just ordered a Warrior Pro for my tactical kit as I work in Security at night mostly my current torch is ok but ok is all it is. I need something that throws light out over a big area for my job.
Looks like a fine tac light. OD Green on the way. 👍👍
I purchased the warrior x last year in black and was delighted with it until I later found out they did it also in FDE colour! 😢😢😢No complaints about the light whatsoever though it’s a great light - I think I’d only upgrade to the x pro if I can no longer do without a tan coloured flashlight (which will likely happen) 🤣🤣🤣
Just got mine today to replace my regular Warrior X
Do you like it better than the regular?
I have been tempted to get this light for a while now. I like the design: it screams for taking it out in the wilderness! This seems really to be a robust light able to take a lot of beating without problem. A light you will not be worried when it gets some scratches or so. It's made for real use! I like the simple user interface with two modes: low and high. That's it. Not even strobe which is so common with lights today. Good: I would not miss it.
But I am doubtful about the high mode: it's a bit too high. Every time you turn the light on at high it will pass through the 2250lm before the stepdown to lower level. It should be 1000-1200lm mode instead. Or a possibility to get something between as well, without the short burst at 2250lm(whether you want it or not) every time you want a higher brightness than 300lm.
The runtime at low mode is good and stable and 300lm is a adequate brightness for most tasks. But if repeatably put on turbo the 2250lm will eat the battery and runtime so the runtime at low mode eventually will be significantly shortened. I welcome comments from users of Warrior X Pro!
Great video, could you shoot a comparison video with the nitecore MH25s!!!
I still like the m2r warrior pro better for EDC....
The Seeker 2 Pro is better
Agreed
It appears that the pressure switch is just "momentary," is that true? (It must be held to keep the light on?) And with the pressure switch, we jump immediately to max power level (no other options, correct?)
I could not find information on their site on the controls/operational modes, and I can see why. There is only the full blast mode, and also a low-beam "flash" mode, and no control over beam width. I was expecting more functionality for the price. Elsewhere you can get sophisticated operational modes and very adequate lumens for less money. With the 'tactical ring' installed, in spite of the spikey looks, the light will roll off of the table, or hood of car. This is just a powerful, non-adjustable beam. If that is what you need, there you go.
No quality flashlights have "adjustable'' beams, wtf are you talking about? and there are only two modes high-constant, high-momentary and low-constant- and low-momentary. no "flash mode".........
Is this a warm or cool beam?
I got the sale price early access I got the black bundle
How??😯
How do you get in on that?
I did to but paid no attention and the switch that mounts to a gun with a different light and I will say the i3 i think it replace my current edc pocket light i like it a whole lot better
Sadly that you didn't put the flashlight in the thrower application on video.
Is that the WE Banter disassembly overview mat?
Yes indeed it is - it's available at www.knafs.com
To those that have this light, do you suggest buying another battery?
This battery has worked well for me, but if you’re going to use it at a higher output often, a back up is a good plan.
The proprietary battery used in these lights is $26 before shipping.
Getting the tan😍
How do you keep it on in the low setting without holding in the button?
Apparently, you cannot do that.
Quick soft tap with NO hold. It takes some getting used to, but it does stay on low setting.
@@DoctaTeeth84 thanks!!! I was disappointed I could only get the high to stay on!! You made my day (night, actually)
@@yru435 Yes, yes you can.
Cant decide between the OD and the tan , think I'm getting the tan
I bought the tan
I lobe the desert tan color. My Seeker 2 Pro is desert tan but I ended up ordering the OD green jist cause its "rarer".
Wow awesome looking edc Olight Flashlights reviews!!! :D
And Hit Like button!!! :D
Aka Olight is best edc Flashlight ever!!! :D
So it'll only shine at 2250 lumens for 2 minutes??
Yes, it's thermally regulated to step down to 1,000 lumens for another 100 mins unless it cools down, then you can turn it back on to 2250. That's a lot of heat it generates at 2250 lumens!
@@jdaniel4237 awesome thank you ! That was also my other question. I just ordered mine ha ! 🤘
@@ericcitalope4246 nice, grats! Got my fde coming later today!
mAh means milliamp HOUR. It is a capacity, not a current rating. 5000 milliamps would be incredibly hot for a device this size. Important difference. The h is there for a reason. K rant over.
I found out that the oring there glows in the dark
Nice light but gets WAY too hot.
🇵🇬🇵🇬
Don't buy O lights the customer service is non existent....