T.Kell Striker Fixed Blade EDC Concealed Carry Knife 🔪
Вставка
- Опубліковано 8 вер 2024
- T.Kell Knives Striker
The Striker new is a Mako style blade with fighter influences. A true T.Kell knife from tip to hilt.
tkellknives.co...
Ulti-Clip Slim 3.3 www.amazon.com...
Special thanks to our patrons:
Dan S.
Mason M.
Chad Y.
Richard Z.
Chad D
James R.
Quentin S.
Stefan M.
Rick G.
Jimbo22
Casey S.
Trevon W.
Daniel K.
Paul B.
Hunter U.
Andrew B.
Dennis O.
Rohan D.
Paul P.,
Shedrick B
Charles H
Go check out our patreon page to support us and get an exclusive inside view of T. Kell Knives plus other perks!
www.patreon.co...
Check out my blades here:
www.tkellknives.com
If you are on the west coast, come see us at the USN gathering, my first west coast knife show, Labor Day weekend 2022 Planet Hollywood, Las Vegas. usngathering.com/
Sweet awesome knife! Love USA made Veteran TKell family!
Howdy Tim! I went back in the Time Machine to watch this! Since I have two strikers I needed to catch up! Thanks!
I got mine in. It's BADASS, came razor sharp and the sheath is really good too!! I ordered another knife after I knew the quality of T. Kell knives.
I absolutely love my reverse tanto nightshade and hearing that "click" every time it goes in or out of the sheath. Not going anywhere unless I want it to. Lots of other sheaths are more of a taco style compression. This sheath style is by far superior and trustworthy!
Thank you Carlos. I really worked hard to get the sheath the way I wanted it. I’m glad it’s working for you how I planned and I’m glad you love the nightshade.
That knife makes me drool. You sold me I have to have one. I got you on Patrean.
You are my favorite designer and I want to support the TKell brand.
That sheath is outstanding not some after thought. Also not buying to show off or put in a case. I invest and use these knifes.
Keep it going man your army is growing. Constantly hearing TKell in streams and videos.
Man thank you so much. The TKellian family means so much to us. Seriously. I'm honored and humbled that you believe in what we're doing so much.
That's one freaking cool looking blade your attention to detail is second to none That's why my next knife will be from TKell
I ordered one today. I'm super pumped.. beautiful blades man
Thank you very much!
Thinking this should be next knife !
Talk about your night huntsman. Im sure its not as practical but love the shape
I have this one coming. The second I get it I'll be at the shop bench making an attachment for my T Rex Sidecar holster. That's the dream, I will make it so. 🇺🇸
Not only is he a nice fella…. He is a Master Knife Maker!
I freaking love this freaking blade and freaking sheath I can't freaking wait to get the one I freaking ordered! Yo Tim! You're freaking awesome! Love all your freaking blades! You're the best! 😎⚔️
Just ordered mine
I have one striker and I’m waiting for my second one to ship.
Can’t wait to get my NIGHTSTALKER CQC in mail already soon !! cheers from Anaheim, California. 🇲🇽🇺🇸 This was my 22nd bday gift Thanks TIM !!!! ROCK ON 🤘🏽
What an honor to be chosen for your special day gift. Thank you very much.
Think i love the striker with a ring grip is right up my alley
Got my Nightshade Reverse Tanto today. Great box! Better knife. The Fallknivens are going on EBay (but seriously). Can’t wait to see the new sheaths. Great work Tim.
Thank you Steven. I'm glad you like it. That Reverse Tanto...wicked. The shade sheath will have the same features and overall look of the Striker.
I want one so badd
Striker is one of my favorites
Me too brother. Glad you like it.
I love your knives. I have the Mercenary, Tarani, and I just received my Striker. I plan on getting more.
Thank you Wade. It’s such and honor when you choose to keep getting my blades.
Just got the night hawk... would be great if you could etch "Made in the USA" on the blade somewhere... maybe the spine between the grips?
That's a BRILLIANT idea! I love that. Designing that in my head now
@@TkellKnives F’n liar.
Got mine on order. Kind of a small Harpoon Bowie blade style. Looking forward to receiving it. Patience...patience!!
Thank you for your order. I appreciate it.
I had to wait until I returned to the States to pick mine up. The grip is very deep and aggressive. Not going to drop this. It can't slip out of the hand. Good job! Great Knife! @@TkellKnives
Amazing knife!!!! I can't wait to own one.
I ordered mine last week with gun metal color handle. Anxiously waiting.
Thank you 🙏
The Patreon is worth it just so everyone knows! Already some great content going on over there!
I want to join but I'm trying to spend as little as possible right now cause I have to build a new transmission for my truck
It's is fun I'm enjoying it also
We will be here. That truck is priority
Call me nuts, but I couldn’t pick just one Tkell knife, so I bought three. Love my Combatant, Nightstalker CQB and can’t wait for my Striker! Get one if you can. Hurry!!! SFMF…
Thank you brother. Semper Fi.
That thing has a beautiful pivot point, it really moves in the hand! About to pick up a NS CQC, unless you’ve got that Night Guardian coming out soon…
Thank you sir. I actually just finished the 3d printer prototype. It’s gonna be pretty special.
Bro, can you put a handle of the nightstalker on it?
Awsome liking blade.
Likin'that harpoon, Tim! ❤
Haha I never thought of that. It would be the perfect EDC for Poseidon
I love the lines on this knife. Racking my brain on which grip color to order 🤦♂️
I love the warrior grips a lot right now. Can’t go wrong with black. A lot of people love this as it is here with OD micarta.
Can’t wait for mine to come in. Finally broke down and ordered one this week.
100% awesome, dude you're awesome
Thank you sir, I'm just a dude making some blades in his basement.
Which steel is this one? Love the finish
Unsolicited Review: I love the design, size, balance and sheath though I’m still sorting out the clip. Horizontal carry in the front does not work for my narrow frame (5’9”, 165# athletic build). I’m testing paracord or an ulticlip for IWB carry, but pocket carry is pretty sweet. Balance is great. I haven’t yet decided what I think of the heat treat though. My standard for sharpness is slicing phonebook paper which has always been easy to achieve with only a short stropping on my other 1095, 52100, A2 blades. This blade came sharp, but had a snag right in the middle of the blade that was clearly a larger carbide. I had to hit it with an extra fine diamond hone to get it out then it took a bit of stropping to polish it to a clean cut on the paper, but it still won’t push cut (though I’m sure It would have with more time on the strop). This isn’t necessarily a bad thing, only time and use will tell me. I’m convinced from the sharpening process (which took a relatively long time) and the sound of the steel that it is way harder than 57 Rockwell and it acts like it has a lot of larger than average carbides in it. I’m betting that it will hold a working edge for a long time at the cost of my sharpening OCD. It honestly reminds me of some D2 that I have had though I don’t doubt it is 1095. The balance is great. It’s on the back half of the front finger groove which makes it just slightly favor the handle. That results in the knife feeling slightly magnetized to my hand. Ergos are a solid “A” in the forward grip; a solid “B” in the reverse grip. The handle is a perfect design for concealed carry. In summary, I absolutely love the blade and plan on EDC-ing it for a while. I really want to check this thing out in 80CRV2 and see how the edge compares.
Thank you for the feedback. There's a lot to process here. First thank you for the compliments on ergos and balance. I design around that first. On carry of the blade, we have narrow, medium, wide, extra wide, non athletic, athletic etc frames that enjoy horizontal cross draw so that may be preference rather than body type. I can assure you that the HRC is within one digit of 57 (56-58). Every blade is HRC tested on certified testing equipment. As for larger carbides we salt bath heat treat so there's no chance for over temp that would result in grain growth. Also we run a 2 hour temper twice with a slow cool to ambient between, then a 30 hour deep cryogenic treatment (-330F) to refine the crystalize structure to be very very fine. There may have been a less sharp spot on your blade from not breaking the wire while stropping, if so I apologize. True deep cryogenics releases all retained austenite which makes the material more dense. The sound it makes comes from a difference in density that you may not be used to hearing unless you've compared deep cryo blades to non cryo blades side by side. This also is what you're feeling during sharpening, denser means longer to sharpen but it's not harder. It's counter intuitive and shocked me when I tested blades during initial testing of cryo. It creates a different animal. It's time consuming and more expensive to heat treat this way but it makes a huge difference in performance.
@@TkellKnives thanks for the follow up, Tim! Have a great 4th of July
You too Brother! Happy Independence Day. Thank you for taking time to review, it means a lot to me.
I have a copy now In 80crv2….it holds a fantastic edge when cutting cardboard. I’m really impressed when compared to my 1095 knives from different manufacturers…I broke down 4-5 decent size shipping boxes and it was still push cutting phonebook paper.
A beaut 👏 👏 👏
Love you're knifes 🔪 quick question are ever going to make a folding knife i think you should make you're own design.
Thank you. Yes we currently have one in the early phases of testing.
@@TkellKnives glad to hear that. Good luck and take care.
Amazing knife probably my favorite I’m just curious why no gimping on the blade?
That is a thing of beauty! What size glove do you wear?
Thank you. Large gloves in most brands. If you're buying me a present, I hate mittens
Lol, thanks. Looking at the combatant as well but I’d like at least 3 fingers on it and glove size helps without handling it.
If I send mine in for sharpening can I get it sent back in one of the boxes? lol
Hell yes brother.
You guys know the sharpening angle? Thanks
20 degrees per side 👍
🥰 amazing I like it I Love it, I like hugs too
Hilarious!
U POSSESS ANY GUT HQQK KNIVES BROSKi.1LUV FAM.
I made some customs in the past. They weren’t big sellers . Maybe I’ll bring them back.
What steel are those
80CRV2
How would you install that multi clip you sell on that knife?
There’s about six different ways that the multi clip mounts to the sheath . I’ll do an updated video on this very soon .
@@TkellKnives I would like to do it vertical cause I carry night shade horizontal and want to carry the striker vertical
The multi-clip uses the same holes that the horizontal clip that comes with the sheath. You can remove the belt loop and adjust the height to your liking. I have an old video on the gen 1 multi-clip but I'll try to upload on the gen2 this week.
Just posted this.T.Kell Multi Clip Tutorial. Molle Vertical Horizontal Multiple Carry Options #edc #everydaycarry
ua-cam.com/video/8vSH0Myhol0/v-deo.html
Looks like Spartan blades shape. Nothing original!
Yeah because they are both made from steel. I guess to a person that has no ability to discern a full handle blade vs a 3 finger or with completely different geometry they’re the same. I’ll pray for your sight to return one one day. God bless
Freaking awesome looking blade!! Just discovered Tkell knives today and ordered the Striker immediately.
Glad you found us. Thank you very much sir.
sick blade