Good evening, I have a question, how do you do so that the ant path does not appear? because I have been working on my epso ET 2803 printer for Sublimation and I get the ant path and I use the yamation flim and the powder, I ask what settings are the most recommended to avoid the ant path? Thank you
I have used my mini heat press with a wet wash cloth dipped in peroxide, . I avoid the design & put wash cloth down with mini heatpress Med heat. The scorch marks will go away! 😊
Thank you for the video, the shirt came out really nice. I is such a game changer. But, no matter what I do, it won't print. I have a Epson ET 2760. I tried it with a sheet of paper, tape on the bottom and tape down the back. Now that way it prints alittle. If anyone have another suggestion I would really appreciate it.. Thanks
What I did was I just put a paper behind it, you need to cover the whole sheet with paper... The sensors of the printer will False flag it as "end of paper". Very weird that she did not show the printing process. I can't get it to print good, I get lines and drops of ink everywhere, I am trying different things right now.
"It looks so good" well you skipped the whole printing process, is that because you had issues with it? Why would you skip that, many people are having issues with that and it's there in the reviews of this products. Can you clearify this?
LOL I didn’t have an issue at all it printed perfectly fine literally no issue and I’m not sure if when I did this or not I knew that people were having issues… I haven’t watched this video in a while so because it printed regular I didn’t think I needed to show it… It came out of my printer like a regular sheet of paper no issues no problems 🤷🏾♀️ nothing really to show…
@@DoDreamOn I just seen allot of reviews and i was wondering how it went since you skipped that part, my printer for example will either feed through and not print at all and or it will print partially. From all the information i have collected, allot of people have issues with this product.
Have you done a wash test? Wondering how it holds up.
How long you press it and degrees. You skipped saying that part. Ty
Oh no forgive me… I don’t remember it’s been so long
Did u put the coated side face down on. Tshirt?
Great job Chonita Nicole! Did you tatie for film to plain paper to feed it through your Epson? And what settings did you use?
Can you use a red shirt?
Is this with sublimation printer or ink jet
I can’t wait to try this tomorrow! Just ordered the powder and film.
Yayyyy how’d it turn out?
Good evening, I have a question, how do you do so that the ant path does not appear? because I have been working on my epso ET 2803 printer for Sublimation and I get the ant path and I use the yamation flim and the powder, I ask what settings are the most recommended to avoid the ant path? Thank you
I really wanted to see it print off the printer if you had to add tape or what you had to do
I didn’t have to do anything it printer out normal no issues no hacks… no tape nothing regular print
Thank you what did you change your paper settings to. I have the same printer and ink. I’m in a big group on FB and we were all looking for this hack
Love this!! Thank you for being so detailed! I’m going to try this!
Awww you’re so welcome! Thanks for watching♥️
Did you have to add paper to d the back for more supper or being flimsy in the printer?
No I didn’t need to add anything to mine… it went right through with no issues… This was my first and only time so far though.
Great job .. I love this hack I love it way better then any other way ..
Thank you for this video! I was on the fence, but I’m going to try it 🥰
You’re so welcome… I’ll do a wash update too soon…🥰
I have used my mini heat press with a wet wash cloth dipped in peroxide, . I avoid the design & put wash cloth down with mini heatpress Med heat. The scorch marks will go away! 😊
I’m getting roller marks and I’m having a hard time getting the paper to go threw my printer? I have an Epson 15000
Oh noooo
Hi I am inlove with dtf please us how to print it through printer
Heyyy I’m so sorry I don’t understand the question…
Love the video and love the shirt. Awesome job💕💕💋💋💎💎
Awww thanks so much !!!
Thank you for the video, the shirt came out really nice. I is such a game changer. But, no matter what I do, it won't print. I have a Epson ET 2760. I tried it with a sheet of paper, tape on the bottom and tape down the back. Now that way it prints alittle. If anyone have another suggestion I would really appreciate it.. Thanks
I’m still rooting for you I responded on another one of your comments… I hope ir works out xoxoxo
What I did was I just put a paper behind it, you need to cover the whole sheet with paper... The sensors of the printer will False flag it as "end of paper".
Very weird that she did not show the printing process.
I can't get it to print good, I get lines and drops of ink everywhere, I am trying different things right now.
Has anyone found a video of someone showing them placing it in the printer
Fabulous! I may have to try this❤️ How much time did it take you to go through the process from start to finish?
I tried to locate the time and temp you pressed for. I see 385 for temp but I can not find how long you pressed it for.
Between 45-60 seconds
@@DoDreamOn Thank you 😊
🤔 definitely thinking about trying this
Can it be used on color shirts too?
No BUT I think I might have a new hack for that... Stay tuned.
What a cool hack. I may have to invest in DTF
Where did you get lint roller. Love your videos
Heyyy Michelle it’s in my Amazon storefront it’s a pet link roller which is stronger than others and it comes with tons of rolls I love it thanks
nice job thank you .. Question what kind of lint roller is that ? that's cute
Thanks sooo much it’s a pet lint roller available on my Amazon link in the description
@@DoDreamOn you're welcome and thank you
Do you turn the print side down on the shirt or the print side up on the shirt
you put the side of the print/ink to touch the shirt, I hope that makes sense
Happy thanksgiving sis, Wowzer, this is amazing, appreciate you showing us❤️🙏🏽
Awww thanks sooo much 🥰 Happy Thanksgiving
Love the video! What is the temperature you used and how long did you leave it for? Thanks so much!
Thanks so much I tried a few but I think I like 400 for 45 sec the best
I love how you did a comparison I can’t wait to order this do you have a link
Thanks yes my link is in the description… I sure appreciate you!!!
Can you use any color shirt for this?
I’m going to do a grey possibly but not dark colors with this it’s more for people who don’t want the glitter vinyl hack
Question 🙋♀️ is it see through? I mean can it be done on only white no reds or blacks?
It’s just like sublimation so it does have to be on lighter shirts I’m gonna do another one on a darker shirt to show you… Thanks for watching 🥰
I have the epson 7720 as well which settings did you use? (high quality pp) Vivid/Adobe 2.2?
😂😂this is the answer I’m searching for
Would this work on dark fabrics ?
No I have a video where so was live talking about why…
I didn't hear mention of heat temp, press time? Maybe I missed it.
Yup I said it I used 385 45 seconds 🥰
LOVE IT THANK YOU FOR SHARING IT WITH US:)
Happy thanksgiving omg I love this
Happy Thanksgiving Thankssss for watching I hope you had a great day
What settings did you use for your printer?
I have two videos explaining my settings
Is it printed into the shirt?
It’s on the film… then pressed into the shirt
@@DoDreamOn awesome, thxs sis
Happy Thanksgiving ❤️
Thanks Happy Thanksgiving
Good video thanks looks good
Awww thanks so much Jessie! I appreciate you!
Thank you 🙏
Happy thanksgiving 🦃🍁🍽 to you guys
Beautiful shirt
Heyyy Happy Thanksgiving!!! Thanks so much 🥰
Happy Thanksgiving 🦃🦃🦃🦃
Thanks Boo 🥰 Same to you ✨
Awesome
Happy Thanksgiving 🦃🍁! So Cute!
Thanksssss Happy Thanksgiving 🥰♥️
"It looks so good" well you skipped the whole printing process, is that because you had issues with it?
Why would you skip that, many people are having issues with that and it's there in the reviews of this products.
Can you clearify this?
LOL I didn’t have an issue at all it printed perfectly fine literally no issue and I’m not sure if when I did this or not I knew that people were having issues… I haven’t watched this video in a while so because it printed regular I didn’t think I needed to show it… It came out of my printer like a regular sheet of paper no issues no problems 🤷🏾♀️ nothing really to show…
@@DoDreamOn I just seen allot of reviews and i was wondering how it went since you skipped that part, my printer for example will either feed through and not print at all and or it will print partially. From all the information i have collected, allot of people have issues with this product.
@@mindmythfilms1428 Yea I didn’t have that issue and I’ve printed several times I hope it can work out for you…
I Love 💗 it!
Thanksssss Boo
Chonita, by the way it’s me Sharnette. I have a new UA-cam handle 😊
Oh okayyy Heyyyyy Sharnette 🥰🥰🥰
❤❤❤
♥️♥️♥️🥰🥰🥰
Hey!! ✌️🙏💯❣️💧🍒🍓✨️🎋🎈💎💎💎💎💎💎💎
Heyyyyy