Great walk-through video and write up, set this up myself just now. Only had a small extra step as I run domain controllers at home so just had to point the dns forwarders to my new AdGuard instance and it now works a treat.
Thanks for the guide Juan. Question regarding what happens when you need to restart the Adguard container or maybe restart Unraid or do maintenance to the home server. I know it means Adguard will obviously not work, but is there a way to set up the router to have a backup DNS instead in that downtime before coming back again?
3 роки тому+1
I also use it as DHCP server and to mask domain requests to my local resources, but I use the Home Assistant addon version.
@@JuanMTech What issues, exactly? It appears to be set up pretty much exactly as you describe in this video. Also, the option to enable results from dockerhub is no longer available in unraid. Can you provide an alternative?
For some reason when I click on WebUI, it loads on port 6052. I have to manually type in port 3000 to get it to load. Port 3000 is not being used. Port 6052 doesn't even show up as one of the allocated ports for adguard.
Hi Juan, when I install Pihole network as custom br:; it keeps change my router port forwarding IP to Pihole IP from my unraid IP, do you know how to fix that? thanks
I know I'm 2 years late but this tutorial was easy to follow. Only issue I am having is Adguard does not seem to work on my Mac. It works on other computers but on my Mac it's as if AG is not running at all. No ad blocks nothing. I even checked off Netflix as a blocked service and I get right through to Netflix on my Mac. No really sure what is going on. Everything on my iPhone is also blocked and working as usual. Also a side note I set up adguard from my Mac so not sure if that is something. I cleared cache and all that on Safari and so far nothing is being blocked. Any ideas?
I can't seem to get is to work, i have the docker container downloaded but and opening but when i change the dns address on my router/ iphone it either doesn't block youtube ads or just doesn't even load youtube. is there anything you can think of that i am doing wrong?
7:55 what if I don't want it as my DNS? What if I want my unifi (or opnsense if I go that route in the future) to hand out IPs but want this to do its job blocking ads? When I try to set the dns in my unifi wan to the adguard which then contains the outbound dns resolvers my wired internet works (that I can tell) but my phone has wifi connection without internet, and I just found a program on my pc (wired) that doesn't work while that is set up, set the wan dns back to auto and it all works again.
If i go to Docker > adguardhome > (left click) WebUI it always trys to connect me through port 6052. (Which obviously doesnt work) When i manually type in 3000 as the port in the url it works but i want it to be smooth and intuitive as possible. Does anyone know how i fix this? maybe a easy fix but im really new to this stuff be easy with me x)
Kind of a basic question, but I can't seem to find any info on it anywhere; on the query log, what does the "eye" icon mean? I have some that are green, and others are greyed-out.
Silly question, but in my ASUS router, I have many choices of DNS Server 1 and 2 settings, including 4 IPs for Adguard 94.140.15.XX . Would setting these accomplish basic ad blocking? TIA!
Another good video thanks. Question. When I tried adguard before I found the dashboard didn't refresh and had to keep refreshing my self to see domains blocked. Pihole refreshes automatically
this needs an updated video. i already had this running before and then when i wanted to see how to get it to work through DNS so all devices just use it automatically, i ended up trying to delete the whole thing and start over and it wouldnt let me and now im reinstalling it and these things still look different and dont look the same in some places. im so confused.
love it. My new mobo for the server is on the way. Then I'm gonna install unraid and adguard, so I could troll my flatmates. Block facebook, instagram, youtube and so on xDDDD
I like the software but it doesn’t do a great job on blocking adult sites.. it’s hit or miss sometime it does but other time it allows them flow right on in. I periodically check and sometimes is blocked and then other times I can get right to them. It’s annoying and I really don’t know how to address it. I have a circle on my kids devices that blocks adult contacts but if they ever come to one of my devices I want to make sure it’s blocked there as well.
I had error 403 when i tried installing AdGuard Home directly instead of clicking on 'get more results from dockerhub' and installing the one stated in the video (1:13)
Straight to the point. Quick and simple. Love it!
still a great and useful video 2 years later! thanks Juan
Excellent video, thanks Juan!
Great walk-through video and write up, set this up myself just now. Only had a small extra step as I run domain controllers at home so just had to point the dns forwarders to my new AdGuard instance and it now works a treat.
Great video! As usually you publish, thank you tocayo!
Thanks for the guide Juan. Question regarding what happens when you need to restart the Adguard container or maybe restart Unraid or do maintenance to the home server. I know it means Adguard will obviously not work, but is there a way to set up the router to have a backup DNS instead in that downtime before coming back again?
I also use it as DHCP server and to mask domain requests to my local resources, but I use the Home Assistant addon version.
Hi,
can you ping an adguard IP address from the host (Unraid)? It seems that every device in my network can reach adguard ip except the Unraid server.
Nice tutorial! Why do you use a 'custom' container instead of the version that's already on the unraid docker list?
That one has one issues
@@JuanMTech I had issues also with that one, the port was not correct and more little issues. Thnx for your video mate!
@@JuanMTech Can you explain what issues exactly?
Juan, can you cover pi-hole, technitium dns server docker setup and config on unraid please
@@JuanMTech What issues, exactly? It appears to be set up pretty much exactly as you describe in this video.
Also, the option to enable results from dockerhub is no longer available in unraid. Can you provide an alternative?
For some reason when I click on WebUI, it loads on port 6052. I have to manually type in port 3000 to get it to load. Port 3000 is not being used. Port 6052 doesn't even show up as one of the allocated ports for adguard.
Hi Juan, when I install Pihole network as custom br:; it keeps change my router port forwarding IP to Pihole IP from my unraid IP, do you know how to fix that? thanks
Which IP Adress do i need to type in, the one from my server or my PCs?thx
Awesome video Juan! Thanks so much. Quick question. Do you know how to enable ipv6 on this container?
I know I'm 2 years late but this tutorial was easy to follow. Only issue I am having is Adguard does not seem to work on my Mac. It works on other computers but on my Mac it's as if AG is not running at all. No ad blocks nothing. I even checked off Netflix as a blocked service and I get right through to Netflix on my Mac. No really sure what is going on. Everything on my iPhone is also blocked and working as usual. Also a side note I set up adguard from my Mac so not sure if that is something. I cleared cache and all that on Safari and so far nothing is being blocked. Any ideas?
I can't seem to get is to work, i have the docker container downloaded but and opening but when i change the dns address on my router/ iphone it either doesn't block youtube ads or just doesn't even load youtube. is there anything you can think of that i am doing wrong?
7:55 what if I don't want it as my DNS? What if I want my unifi (or opnsense if I go that route in the future) to hand out IPs but want this to do its job blocking ads? When I try to set the dns in my unifi wan to the adguard which then contains the outbound dns resolvers my wired internet works (that I can tell) but my phone has wifi connection without internet, and I just found a program on my pc (wired) that doesn't work while that is set up, set the wan dns back to auto and it all works again.
If i go to
Docker > adguardhome > (left click) WebUI
it always trys to connect me through port 6052. (Which obviously doesnt work)
When i manually type in 3000 as the port in the url it works but i want it to be smooth and intuitive as possible.
Does anyone know how i fix this?
maybe a easy fix but im really new to this stuff be easy with me x)
Kind of a basic question, but I can't seem to find any info on it anywhere; on the query log, what does the "eye" icon mean? I have some that are green, and others are greyed-out.
I am wondering this as well
Silly question, but in my ASUS router, I have many choices of DNS Server 1 and 2 settings, including 4 IPs for Adguard 94.140.15.XX . Would setting these accomplish basic ad blocking? TIA!
Any pros or cons compared to pihole?
Do I need to configure DNS settings in my router?
I dont have the custom network type: br0, how did you get that? im having trouble connecting to the adguard webui
I tried both and they wont get rid of some anoying ads, great tuto anyway, thanks
Anyone know how to set this up in a netgear/orbi router? I've gotten everything set up but I cant figure out where the dhcp/dns settings are!
Another good video thanks. Question. When I tried adguard before I found the dashboard didn't refresh and had to keep refreshing my self to see domains blocked. Pihole refreshes automatically
i got this error (Error: control/install/check_config | Network Error) any solution
How did you set it up so that you went to "theark" rather than the IP address?
Love your unRAID banner. Can you link to the image for it please?
During "Get started" when i put port 3000 i get warning that its a duplicaded port and cant continue
igual
this needs an updated video. i already had this running before and then when i wanted to see how to get it to work through DNS so all devices just use it automatically, i ended up trying to delete the whole thing and start over and it wouldnt let me and now im reinstalling it and these things still look different and dont look the same in some places. im so confused.
a video for google foto alternative will be really good (like Chevereto)
Doesn't work with the current docker config. WebUI doesn't load.
Is this completely free or do I need a License?
love it. My new mobo for the server is on the way. Then I'm gonna install unraid and adguard, so I could troll my flatmates. Block facebook, instagram, youtube and so on xDDDD
I like the software but it doesn’t do a great job on blocking adult sites.. it’s hit or miss sometime it does but other time it allows them flow right on in. I periodically check and sometimes is blocked and then other times I can get right to them. It’s annoying and I really don’t know how to address it. I have a circle on my kids devices that blocks adult contacts but if they ever come to one of my devices I want to make sure it’s blocked there as well.
there is now a template to make the install process easier
Anyone else getting Execution error 403? Tried Pihole and got the same but everything else seems to install fine :/
I had error 403 when i tried installing AdGuard Home directly instead of clicking on 'get more results from dockerhub' and installing the one stated in the video (1:13)
Does this block UA-cam in-video ads?
No. Don't believe there are any adblockers that do that.
@@BabaHamoudy well, most of the adblockets do that (uBlock, AdBlock)
no IPV6 :(
"all ads" except for UA-cam
[angry at UA-cam, not Juan!!]