I bought 2 Vallhorn and they got recognised as Zigbee devices but they get stuck on the original detections and never update. So they report the light level and motion detected or not detected from when they are first paired but then this never updates
@@rasimmondsBased on my experience this motion sensor works great. The sensor has a firmware: 0x01000057 and I use HA container Core 2024.3.1. From your coordinator must not depending your issues, I use Sonoff and SkyConnect as well.
After long surfing the web for a answer on this question, i found one that worked for me; other batteries (some batteries give a little more or unconcistend “juice”)
@@ezesaz5021 Home assistant recognises the sensor but i am unable to switch a light. The sensor sees motion but it doesnt switch the light. I have tried al the possible settings.
You have 2 solutions. Write an automation or direct bind the sensor with the light. Do you want to control an Ikea Zigbee Led bulb or other Zigbee bulb?
@@ezesaz5021 i have wrote an automation, the ikea motion sensors senses the motion (that i can see in home assistant) but the light doesnt turn on (it is not a ikea light) The same automotion works with a sonof sensor.
These sensors are designed to work with 1.2v (rechargeable) batteries only. I found that they don't work properly (fail to trigger lights, etc) when 1.5v (alkaline) batteries are used.
Ok Press the Pair button 4 times...
Thanks...
Hi, did they work with philips hue bridge please ?
I do not have philips bridge. I think it doesn't work with them.
Great video. My VALLHORN in the dark mode is turning on when is too bright. Is it possible to change that level?
I didn't find a solution for that.
what are the difference between the two light mode? thanks
Hi! Night and day mode.
Binding is great but what if I only want to turn the light on after sunset?
If you integrated both devices you can make an automation. Or you can set the motion sensor for night operation.
I bought 2 Vallhorn and they got recognised as Zigbee devices but they get stuck on the original detections and never update. So they report the light level and motion detected or not detected from when they are first paired but then this never updates
By me everything work fine under HA Core 2024.3.1 Try to integrate them again.
@@ezesaz5021 Yep tried re-adding them many times and the problem continues
@@rasimmondsBased on my experience this motion sensor works great. The sensor has a firmware: 0x01000057 and I use HA container Core 2024.3.1. From your coordinator must not depending your issues, I use Sonoff and SkyConnect as well.
After long surfing the web for a answer on this question, i found one that worked for me; other batteries (some batteries give a little more or unconcistend “juice”)
Same here. no matter what i try they are unable to switch a light.
These sensor are bad. I dont get them to work in home assistant. I bought 2 of these shitty sensors.
Hi! I dont know what is the problem at you. This motion sensor are one of the best I tried.
@@ezesaz5021 Home assistant recognises the sensor but i am unable to switch a light. The sensor sees motion but it doesnt switch the light. I have tried al the possible settings.
You have 2 solutions. Write an automation or direct bind the sensor with the light. Do you want to control an Ikea Zigbee Led bulb or other Zigbee bulb?
@@ezesaz5021 i have wrote an automation, the ikea motion sensors senses the motion (that i can see in home assistant) but the light doesnt turn on (it is not a ikea light) The same automotion works with a sonof sensor.
These sensors are designed to work with 1.2v (rechargeable) batteries only. I found that they don't work properly (fail to trigger lights, etc) when 1.5v (alkaline) batteries are used.