Restoration - 60-year-old fire alarm😨
Вставка
- Опубліковано 30 тра 2024
- Restoration - 60-year-old fire alarm😨
hello guys
This channel is all about the how to restore or make a new one things I do and how I do it . Mainly you will see here restoration videos because CONVERTING OLD RUSTY THINGS TO NEW THINGS ARE SO SATISFYING and I will also do some customization project which I hope you like it in how to restore channel videos
I'm still learning how to work with UA-cam,so please help me out by subscribing and if you like my content tell me what you think in the comments section.
like and Subscribe for more and stay tuned.
Thanks for all your support, we really do appreciate it :-)
ua-cam.com/channels/WwU.html... - Навчання та стиль
Restoring is not putting your logo, it is leaving it as it was made in its day, greetings ⚡🇪🇸🇮🇨👍
Amazing how you restored that old electric bell, whether it is a school bell or a fire alarm. It still looks much better and it works like a charm too. Excellent work.
This bell was probably made in the UK in the 1970's or 80's. Nice work, except for the logo.
🙏👌
Not very accurate. You should have restored the original label..
Super jest odrestaurowany ten stary zabytkowy dzwonek do drzwi Pozdrawiam serdecznie. 👍👍👍👍👍
Hello from the Canary Islands Spain, the school bell cannot be 60 years old, I say this because the power terminals are too modern 🇪🇸🇮🇨🫂👍
This is not school bell this is fire alarm bell
Полностью с Вами согласен. Ему не может быть 60 лет. И это действительно пожарная сигнализация, легко читается надпись FIRE
A “fire” bell ~ all fire alarm systems started with these as their “alarms” in the 50s & 60s, before being replaced with/installed with new installations - the piezo sounder in the 80s
I love all your Restoration videos...
Love from India 🇮🇳💯❤️
I think this is an old fire alarm, not a school bell. Great work, indeed.
It says "FIRE" right on the label. So, you are probably right.
Great Job!
Class dismissed 😂😂😂😂😂❤❤❤❤
Thank you!
this old bell remind me an old time when I was just a little school boy!
U did very wel.. It really good after renovation 👏👏
So beautiful indeed, a master❤❤❤❤❤
Ustam şaşırtmadın yine mükemmel bir işçilik tebrikler.
1:30 short leg down, long leg for a handle for leverage. always helpful to know how to use tools.
THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Nice😊
Very good
1980 school bell was one of these😊🎉
👌
You used putty, but there are still caverns at the end((
Bell coil voltage is 24v DC, 230 v plug in = KABOEM
لم أفهم تعليقك يا صديقي. أظنك قلت شيئًا مهمًا.
تحياتي لك.
Great job 👏👍👌❤️
Beginner, just cleaning and painting...
very good video
Have seen many shows where they use heat to loosen frozen screws/bolts ...noticed you did not try that technique
Perfect
Cool 😎😎😎👍👍👍
Try restoring something rather than destroying it!
Amazballs
Where do you find things to restore? Do you go to junk yards or antique stores?
Ya no sonara igual al haber masillado.
🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍nice job!!!
Problemas na preparação e aplicação da massa não tirou as imperfeições. Mudou a cor do objeto e na sequência as características não restaurou.
It is necessary to improve your restorations, the logo on the device was supposed to be like the original.
That’s an old retro are fully on fire bell stop please
Una morsa da banco non ce l'hai ?
Stay true to the craft. It's a "Fire Alarm Bell" not a school bell. You Insulted all of us in the fire service by misrepresenting the device. I am a retired firefighter with 32 years of service. 😢😢
Yes, it is true, but in our country, the school bell is used more often, and I apologize to you again
ugly surface
Not very good job
Why go through all the time & effort to use rust & paint removal if you're just gonna media blast it anyway? Seems unnecessary & rather redundant. Plus, all that putty will definitely stifle the ring of the bell. I mean, really, why? The longer I watched this, the worse it got. I finally had to give up at the spray painting part. Enough. . .
So that the paint and dirt etc doesn't get mixed with whatever sandblasting compound he's using. Tons of restoration channels strip the parts first then usually only blast for whatever is remaining. It's quite common and gives their blasting material more life. That's the only explanation I can think of.
@@norith4300
If the paint contains lead, they want to strip that first. Otherwise the lead paint can become airborne, and you might breathe it in. Other than that, I don't see the point. It's a lot of time spent on needless steps. I see some of them using multiple rust removing steps just to media blast or to clean it with a wire brush. I just don't get it. Maybe it's something like what you are saying. But that seems really not worth it for the time spent. And it's not just for media blasting but with use of a wire brush too. They couldn't just go straight to that step? Very strange.
60 years BC 😂
❤FERHAT.WİLLİAM
Perfect