TDI engine project build running by its lonesome, diesel and air only. 12 volt source just to get it started. It eventually will be going in a Toyota trail rig build.
Great job guys! That is a great engine choice also. My buddy at work has a 2001 Jetta TDI with 438k. miles on her! Can't wait to see the Tonka roll with it! Curtis
The previous iteration of this engine the TD (no i) was particularly bomb proof. I had one in a Passat, I only filled up once a month, like this one it had no electronics at all. You could pressure wash the engine bay whilst it was running and it wouldn't stop.
You guys inspired me to put 1.9 tdi in my rabbit. After watching this vid I did a bunch of research and made my own hybrid pump for a 1.9 I found dirt cheap. Went with bigger nozzles and now I’m waiting on some gaskets to go bigger turbo! Thank you!
A dinosaur engines, one of the best diesel ever made by VW, there are really popular here in EU, a lot of people still have them even it turned over 400.000 kms. Skoda (one of the concern's makes) sold them with 66kw and 81kw, finally 96kw this one already have PD injectors. still doing service. I would assume the one shown would have 74kw or even 66kw if it's from golf. Super cheap parts, really reliable engine with low consumption!!! my 1.9 TDi 77kw 2006 Octavia II. and my wife's 2.0 TDi 103 kw facelifted octavia II 2009 we curently drive could not be ever compared, both complicated PDs injectors....full of electronic devices such a pain...miss my old octavia 2002 I. 81kw!!! or golf IV 2001 74kw
Indeed. Stepping down two cylinders from a AKE 2.5 TDI (also a decently reliable engine) to this as my winter daily. A buddy drove his 1.9 TDI past 600k kilometers just recently, it even seem to have retained most if not all the horses too.
@@swiclabc even 96kw has been a PD!!! Put this text to google translator “před časem potěšen oznámením automobilky, že se zavádí montáž TDI motoru s výkonem 96 kW. Ten je osazen moderním systémem přímého vstřikování paliva čerpadlo tryska neboli TDI-PD.” 74kw as well but this one has been fitted to a “tour” released octavias aroun 2010 only.
Thanks for the video I always wanted to use one of these 1.9‘s and do a swap in a Dodge Dakota but I did not know how to do the electronics on the electronic injection pump
This is a part of history that made vw one of the biggest car makers in the world. Every part is so fucking huge on this motor regardless to fact it has 90-110bhp. You get there a oil filter that comes from a 10liter truck! Solid and simple.
Best engine 1.9TDI 90hp, till now 2.5 milion kilometers in 20 years. No big problems, regular oil change and time belt. Only bad spots are: electro magnetic ventil on bosh pump(fixed by direct connecting wire on ventil from light position) and intercooler pipe always blow(fixed with duck type).
I'm interested in doing this on my toyota pickup. can you please put me in touch with him so i can clarify a few things on what was needed for the pump to be used?
Deano! What's up. The intake on those diesels are notorious for getting clogged up. Also I have an almost infinite supply of fryer oil if you want to biodiesel it. Good luck. It looks pretty interesting.
JOOOHHHNNNIIEEEEEEE!!! This will likely have a high mounted snorkel intake fed directly to the turbo. Sadly, its all been moved into store for the winter. We lost our barn/workspace (grandmothers property is up for sale) so it may be a bit until we can get back at it. Still have lots to do on the frame and what not.
Wow,,,I never have a recollection of subscriving so fast to a channel! I LOVE This video "No electronics is AWESOME!!! perfect for SHF...and prepping. How much was that fuel pump?
Hi you are amazing. Would you consider putting a VW Diesel into my s10 blazer. Diesel Conversion specialist makes a bolt up kit to a Chevrolet Transmission (adapter plate, starter, fly wheel etc...
Did you have to make any special plumbing or adapters to make the VE pump fit the ALH? Also what is the setup for the spacer behind the gear ? Cool stuff man
Kwl. This gives me an idea to try and start my car without a key by shorting the starter ignition wire to the battery positive to see if the engine will run
Which injection pump, and which engine is that "Exactly"? I'm looking to do something similar for a toyota build that doesn't require an ECU. Any info would be excellent!
I'd like to purchase the info, specifics, specifications... that you've figured out so I can avoid the research and trial and error. I have a eurovan and am ready to convert. I prefer the non computerized conversion and am pressed by your work.
1,9 tdi alh engine with vtg turbo! A little bit better (simpler) 1.9 tdi agr engine, turbo with simple flap mechanism to reduce / regulate the pressure. I own the agr 365tkm / 230tmi consumption 4,5l/100km / 62mpg
Do you guys have a part number for the VE pump? I’m looking to do the same for a build I’m doing. Also How does the pump know to deliver more fuel with it being turbo? Does the VE pump have a boost refrence take off?
I know this is an old video but for anyone wanting to make a similar modification you can get a fully mechanical p-pump from an older rabbit or golf 1.6 and it will practically bolt right in to where the 1.9 pump sits and I believe uses the same cam belt gear but could be wrong. The only thing that you have to look out for is injector / pump tuning. Ideally you'd use the 1.6 injectors to start off with to make sure the conversion works as they will match how the pump is tuned, but could go back to the 1.9 or bigger aftermarket injectors that way you can lower the overall duration of the injector fire, and therefore you can reduce egts and up the power, but that is if you are trying to really tune it to how it should be, a 1.6 pump and injectors will make this 1.9 a dog but usable, but there is a plethora of modifications you can do to tune the pump with bigger injectors. Buying an old pump is risky, but an old pump can almost always be rebuilt and retuned, as long as there is a parts market, or you can learn to resource and reuse old parts, but that requires having a good amount of space for an abundance of good and bad parts to salvage from, which can turn into a cluster-phobic headache or an eyesore for most who don't see the value.
Might need a few more parts for that Yota. That is exactly what I would do with that motor though. Good on ya. Maybe put it in a Samurai or an old beat to shit Jeep. Good luck!
the waste gate in these old motors just used manifold pressure and the spring in the waste gate to manage boost pressure curde but effective for millions of diesel engines made
im in processe imagining an electronic free vnt system wired on a cable throttle of my 2,0l jetta engine , found that complete manifold of 1.9TDI fit perfectly with the 2.0lAEG head , kinda cool
The AAZ(TD) is a pre chamber diesel and the TDI is a direct injection engine with a ECU controlled injection pump. This guy has made a mTDI the m is the mechanical pump like a AAZ would have (No ECU).
yup if ever my injection pump dies in my 04 golf im buying a 500$ beater to get to work and back and in the work shop my dub goes for what you just did was wondering if the older pump could go on a tdi drive by wire sucks
Thanks for taking time to make this video. I have a question for you, if you can please answer, just your thoughts. I have an engine 1.9SDI, mounted on a Skoda fabia, 2004. I want to use this engine on a mobile saw mill, unfortunately the injection pump it is electronic controled. After several days of fails I manage to start the engine and accelerate it up to about 1200RPM with the electronic pump, just by opening the pump and making some changes. If I buy a Injection pump from, 1996 , same engine but with TDI, the pump is mechnical, can I install it on this engine? it will work?? I am not concerned about lossing few HP, but it needs to run shooth . Just let me know what you think. I contacted several companies experts in Injection pumps and they told me they have lotd of work and they dont play with this stuff Thanks again
The electrical system on the ALH can be made to stand alone using the stock injection pump and ECU. The ECU does need to be re-flashed though. The ALH never came with a mechanical pump as far as I know... You're probably referring to the 1.9L AAZ. I have no idea how different that platform is...
I don't exactly remember... I did have to buy a timing tool for the injection pump. But there are timing marks on both the injection pump and the engine.
Yes, you need some engineering and know how - but swapping a bosch VE for a different bosch VE is "relatively" easy if you know how, though even the easiest swap is hugely more work than keeping an original pump and simply having an injection pump specialist change the internals on an existing pump, for more fueling, govenor alterations, etc.
Well done! That's looks like a much improved engine for a boat.
ua-cam.com/video/wk2AOh3YTKs/v-deo.html
Would be a great boat engine
Great job guys! That is a great engine choice also. My buddy at work has a 2001 Jetta TDI with 438k. miles on her! Can't wait to see the Tonka roll with it! Curtis
The previous iteration of this engine the TD (no i) was particularly bomb proof. I had one in a Passat, I only filled up once a month, like this one it had no electronics at all. You could pressure wash the engine bay whilst it was running and it wouldn't stop.
I have pressure washed my bhw tdi while it was running. It still works
You guys inspired me to put 1.9 tdi in my rabbit. After watching this vid I did a bunch of research and made my own hybrid pump for a 1.9 I found dirt cheap. Went with bigger nozzles and now I’m waiting on some gaskets to go bigger turbo! Thank you!
noice! DO you have a video of it running??
Can you share what you did?
What pump?
Share more info please.
More infor please what pump did you use
need vid on how yall did this. wanting to put one in my suzuki samuria
vet cool idea, ,keep us posted on progress. ..I'm excited to find out more..
That’s beautiful and alive, I can imagine the Golf or Bora it was once in ..
A dinosaur engines, one of the best diesel ever made by VW, there are really popular here in EU, a lot of people still have them even it turned over 400.000 kms. Skoda (one of the concern's makes) sold them with 66kw and 81kw, finally 96kw this one already have PD injectors. still doing service. I would assume the one shown would have 74kw or even 66kw if it's from golf. Super cheap parts, really reliable engine with low consumption!!!
my 1.9 TDi 77kw 2006 Octavia II. and my wife's 2.0 TDi 103 kw facelifted octavia II 2009 we curently drive could not be ever compared, both complicated PDs injectors....full of electronic devices such a pain...miss my old octavia 2002 I. 81kw!!! or golf IV 2001 74kw
Indeed. Stepping down two cylinders from a AKE 2.5 TDI (also a decently reliable engine) to this as my winter daily. A buddy drove his 1.9 TDI past 600k kilometers just recently, it even seem to have retained most if not all the horses too.
The 96kW doesn't have PD injectors and the 1.9 TDi 74kW is a PD. Only engines with the simple fuel pump were 66kW, 81kW and 96kW
@@swiclabc even 96kw has been a PD!!! Put this text to google translator “před časem potěšen oznámením automobilky, že se zavádí montáž TDI motoru s výkonem 96 kW. Ten je osazen moderním systémem přímého vstřikování paliva čerpadlo tryska neboli TDI-PD.” 74kw as well but this one has been fitted to a “tour” released octavias aroun 2010 only.
I like so much the diesel engine sound! it's great. Regards from Mexico
Thanks for the video I always wanted to use one of these 1.9‘s and do a swap in a Dodge Dakota but I did not know how to do the electronics on the electronic injection pump
Love it. May try this when I get to slapping mine in a yota. Love the fact you can push start it now.
This is going to go into a JEEP YJ now. The YOTA has been abandoned due to the frame complications.
This is a part of history that made vw one of the biggest car makers in the world. Every part is so fucking huge on this motor regardless to fact it has 90-110bhp. You get there a oil filter that comes from a 10liter truck! Solid and simple.
Best engine 1.9TDI 90hp, till now 2.5 milion kilometers in 20 years. No big problems, regular oil change and time belt. Only bad spots are: electro magnetic ventil on bosh pump(fixed by direct connecting wire on ventil from light position) and intercooler pipe always blow(fixed with duck type).
I liked the way he "pumped" the throttle like it had an accelerater pump not a butterfly to allow air in. Lmao
Its a mechanical injector pump, it moves some fuel to the injectors this way as the electronics are cut.
What would it take to get a full list of parts off you, to do this? @@bisket2003
Love to see the how you make the spacer for the Bosh VE pump. Like to have a set up like that
I'm interested in doing this on my toyota pickup.
can you please put me in touch with him so i can clarify a few things on what was needed for the pump to be used?
Awesome! I love my TDI!
What kind of fuel consumption have you seen with the bosch and what kind of power?
Deano! What's up. The intake on those diesels are notorious for getting clogged up. Also I have an almost infinite supply of fryer oil if you want to biodiesel it. Good luck. It looks pretty interesting.
JOOOHHHNNNIIEEEEEEE!!! This will likely have a high mounted snorkel intake fed directly to the turbo. Sadly, its all been moved into store for the winter. We lost our barn/workspace (grandmothers property is up for sale) so it may be a bit until we can get back at it. Still have lots to do on the frame and what not.
Awesome video thanks for sharing. Putting a 1.6td in my samurai
Good work . What did you do with the boost control?.
Was it ever finished? I got a 1.9 ahu im planning on putting in a dune buggy. Wondering how big of a spacer was needed to fit the 4bt ve pump?
Wow,,,I never have a recollection of subscriving so fast to a channel! I LOVE This video "No electronics is AWESOME!!! perfect for SHF...and prepping. How much was that fuel pump?
Holy shit that engine sounds amazing
Lovely. Wish I had the non-electronic diesel pump in my TDI where you can pull the gas in the engine bay.
Thats mechanic pump. Electronic one is much better
Love that sound... ✌✌✌
Hi, great job!, did it find its way into a vehicle? How's the power and fuel mileage? Thanks
does that motor still run crazy efficient without the electronics?
I need to know how you did this... I’d like to replicate it to use 2 of these on my boat...
Nice job.But what type of pump did you use and the turbo does it perfome the same?
watch it again and pay attention. he said it
that sound tho... iconic. the 1.9 is very reliable, but it loves to sip oil
Probably why it's good practice to drain the intercooler periodically, it acts like a catch can.
Mine doesn’t consume any oil
Cool Video thanks for sharing! How is the yoder conversion going?
Might be a good setup to power a generator. Seems easy to work on.
The best engine ever built by VAG group. reliable as nothing! i miss my Seat ibiza tdi.. buaaaaaa
I have it 350.000 and nothing bad happened.
Best engine ever made.
Woow! I'm impressed! Which parts need to be new or modified? I plan the same so I need help.
Well done!
Hi you are amazing. Would you consider putting a VW Diesel into my s10 blazer. Diesel Conversion specialist makes a bolt up kit to a Chevrolet Transmission (adapter plate, starter, fly wheel etc...
Oh a m-Tdi I’ve done the same. Looks great 👍
Do you have any info on what parts you used and how you did it
I think it's a Land Rover pump that's on mine , I bought it already modified
Did you have to make any special plumbing or adapters to make the VE pump fit the ALH?
Also what is the setup for the spacer behind the gear ?
Cool stuff man
I too would like to know as I am getting ready to do a tdi swap and would love to be full mechanical!
I'll het to get back into this project and give more details. My brother is the one that did moist all the work here so far.
I very like it good job!
Kwl. This gives me an idea to try and start my car without a key by shorting the starter ignition wire to the battery positive to see if the engine will run
Which injection pump, and which engine is that "Exactly"? I'm looking to do something similar for a toyota build that doesn't require an ECU. Any info would be excellent!
I am not a mechanic! but I'm going to do the swap! What do you mean with the kit? Or what pieces are I going to use to make my swap?
can you show the spacer for the injection pump
My god that whistle
so all you did to make the pump work was put that spacer in? you didn't have to change the governor to the VW style?
yoter!!! haha i am planning on doing a m-tdi in my 93 extended cab.
Hi man, what type of diesel engine from vw has no electronics?
I wanna make a buggy.
that is actually a starter from a 1.6 diesel.
awesome job
Thank you! Cheers!
I'd like to purchase the info, specifics, specifications... that you've figured out so I can avoid the research and trial and error. I have a eurovan and am ready to convert. I prefer the non computerized conversion and am pressed by your work.
Does it need more timing it’s puffing white smoke more timing = more fuel = more black smoke??
What a nice mod on your 1.9
Did you make or find that spacer for the 4 bt pump?
We made it on CAD and cut it out.
You should make a video of how to do it fully
So when can we get a video on the bracket system for it to mount to the mechanical pump
Will get more info and video on this when we get back into the project!
Effing brilliant!!1
Was it always hard to start or just in the video? Cool set up!
1,9 tdi alh engine with vtg turbo!
A little bit better (simpler) 1.9 tdi agr engine, turbo with simple flap mechanism to reduce / regulate the pressure.
I own the agr 365tkm / 230tmi consumption 4,5l/100km / 62mpg
62 mpg??? On what build?
1.9 Tdi 66kw , best engine ever
Wuauu excelente adaptación me gustaría saver el modelo de la bomba de gasoil q adaptas te porfabor
Do you guys have a part number for the VE pump? I’m looking to do the same for a build I’m doing. Also
How does the pump know to deliver more fuel with it being turbo? Does the VE pump have a boost refrence take off?
You tune the pump it gets a curtin amount of fuel wether boost is there or not
I know this is an old video but for anyone wanting to make a similar modification you can get a fully mechanical p-pump from an older rabbit or golf 1.6 and it will practically bolt right in to where the 1.9 pump sits and I believe uses the same cam belt gear but could be wrong. The only thing that you have to look out for is injector / pump tuning. Ideally you'd use the 1.6 injectors to start off with to make sure the conversion works as they will match how the pump is tuned, but could go back to the 1.9 or bigger aftermarket injectors that way you can lower the overall duration of the injector fire, and therefore you can reduce egts and up the power, but that is if you are trying to really tune it to how it should be, a 1.6 pump and injectors will make this 1.9 a dog but usable, but there is a plethora of modifications you can do to tune the pump with bigger injectors. Buying an old pump is risky, but an old pump can almost always be rebuilt and retuned, as long as there is a parts market, or you can learn to resource and reuse old parts, but that requires having a good amount of space for an abundance of good and bad parts to salvage from, which can turn into a cluster-phobic headache or an eyesore for most who don't see the value.
It is an older view, but still gets tons of views and comments rather regularly. Thanks for the input! I wanna get a undated video shot and uploaded.
Might need a few more parts for that Yota.
That is exactly what I would do with that motor though. Good on ya.
Maybe put it in a Samurai or an old beat to shit Jeep. Good luck!
The yota was complete when we got it, just had the bad frame. Still a project on the back burner.
What injection pump are you using
i wonder how the turbo is Working with out the vaccum switch n75? IT need the écu to run the vnt 15 !
Yes I agree !
Sometimes people replace their VNT turbo with a wastegate turbo and a mechanical wastegate actuator.
the waste gate in these old motors just used manifold pressure and the spring in the waste gate to manage boost pressure curde but effective for millions of diesel engines made
im in processe imagining an electronic free vnt system wired on a cable throttle of my 2,0l jetta engine , found that complete manifold of 1.9TDI fit perfectly with the 2.0lAEG head , kinda cool
if the vnt vanes react with the gaz pedal position it should work fine ?
I’m interested in the mechanical injection pump conversion. Is that the 1.9 ALH ?
the pump was off an industrial NA 4BT
VW did make mechanical pumps for the ALH, a guy in Canada imports them
@@bisket2003 any more info on the injection pump?
I wasn’t aware cummins made a NA diesel?
@@1966cambo the backhoe when I worked at a cemetery had an NA 4bt
@@1966cambo lots of them.....especially back in the day they even had a super charged N series
so its like a TDI converted to be an AAZ? (1.9L, mechanically injected)
The AAZ(TD) is a pre chamber diesel and the TDI is a direct injection engine with a ECU controlled injection pump. This guy has made a mTDI the m is the mechanical pump like a AAZ would have (No ECU).
hi u start up not put ecu how start?
Awesome 🤩
What kind of spacer use on the pump pulley
Hi mate brilliant video and demonstration, what engine code is the engine many thanks
Sarah Barden BKC BXE 😅
pls vid on how to do this
all you need is power to fuel solenoid source of fuel and bridge the starter
What did you do for the injectors and the injector lines?
They need to be swapped out for another size for tuning. The Injector pump now controls the injectors.
amazing ! mechanic injection pup is from cars used ?
I believe it was from a Tractor.
how did you get it without any electronics ? which engine exactly please
My buddy’s got one of these his has 450,000 i think or around there beautiful engines!
That's awesome
Injection angle?
what is the pump mumber? type...
yup if ever my injection pump dies in my 04 golf im buying a 500$ beater to get to work and back and in the work shop my dub goes for what you just did was wondering if the older pump could go on a tdi drive by wire sucks
+MrCinimod93 no, you'd have to use a manual pump to eliminate drive by wire.
what would I have to pay to get a pump spacer like you have?
I would if you teach me how to go about it
swapped thr pump bracket correct ?
Thanks for taking time to make this video.
I have a question for you, if you can please answer, just your thoughts.
I have an engine 1.9SDI, mounted on a Skoda fabia, 2004. I want to use this engine on a mobile saw mill, unfortunately the injection pump it is electronic controled.
After several days of fails I manage to start the engine and accelerate it up to about 1200RPM with the electronic pump, just by opening the pump and making some changes.
If I buy a Injection pump from, 1996 , same engine but with TDI, the pump is mechnical, can I install it on this engine? it will work?? I am not concerned about lossing few HP, but it needs to run shooth .
Just let me know what you think.
I contacted several companies experts in Injection pumps and they told me they have lotd of work and they dont play with this stuff
Thanks again
The electrical system on the ALH can be made to stand alone using the stock injection pump and ECU. The ECU does need to be re-flashed though.
The ALH never came with a mechanical pump as far as I know... You're probably referring to the 1.9L AAZ. I have no idea how different that platform is...
I like it. Simple and easy. I have a BLS engine that I don't replace sensors on, lmao
awesome work You done guys
is there other diesel pump what I can use like Bosch 028130107A VW T4 ? have an ALH 1,9 TDI in My mk1 Golf 1980
Que bomba inyectora le pusiste?
How did you set the initial timing for the fuel injection pump before the engine timing belt was installed
I don't exactly remember... I did have to buy a timing tool for the injection pump. But there are timing marks on both the injection pump and the engine.
Did you ever use it? Want to sell it? I want to put it on my stump grinder
can you use the land rover 300 tdi pump like on the 1z engine
Yes, you need some engineering and know how - but swapping a bosch VE for a different bosch VE is "relatively" easy if you know how, though even the easiest swap is hugely more work than keeping an original pump and simply having an injection pump specialist change the internals on an existing pump, for more fueling, govenor alterations, etc.
Didn't even know a 4bt VE pump would work. I have a 99.5 jetta ALH I been wanting to put into either a 4runner or frontier. Tacoma's cost to much lol.
Any for sale?
BRAVO KOLUMBO
Stock injectors,????
Where I can find the adapter for the 4bt pump?
we machined it.
how did you tune the pump for the engine? or did you but too many questions for now
+Stephanie Kirby It's not tuned yet.
adjust pump timing using hammer method
How did you time the injectors firing?
the injection pump does the job.
Is there a manual injection pump conversion for the 3 cylinder TDI?
Not yet, we custom made the plates.
What are the turbo specs?
Is that the standard turbo? It looks tiny.