Це відео не доступне.
Перепрошуємо.

Honda NC 700 750 S/X/Integra DCT first oil change (twin filter) using torque wrench-step by step DIY

Поділитися
Вставка
  • Опубліковано 18 лис 2016
  • Step by step tutorial, based on Honda service manual.

КОМЕНТАРІ • 65

  • @stephencarrahar286
    @stephencarrahar286 6 років тому +3

    Very professional and with no speech, only sub titles you make it almost universal.

  • @palawanlife7026
    @palawanlife7026 3 роки тому +2

    Best servicing video I have seen, very detailed and to the point.

  • @TheDervMan
    @TheDervMan 7 років тому +10

    Fantastic video, thanks for taking the time to make and upload.

  • @mrKrioRU
    @mrKrioRU 2 роки тому

    Спасибо за видео, все очень понятно и без слов. От себя могу добавить, что в новый фильтр пока он не установлен лучше сразу не только смазать резинку но и немного залить в него масла. Это поможет ему нормально пропитаться маслом до пуска двигателя. Заодно сократит время когда в нем будет воздух в момент старта. Всем ровной и сухой дороги!

    • @mrKrioRU
      @mrKrioRU 2 роки тому

      Thank you for the video, everything is very clear and without words. From myself I can add that it is better to immediately not only lubricate the rubber band but also pour a little oil into it until it is installed. This will help it soak normally with oil before starting the engine. At the same time, it will reduce the time when there will be air in it at the time of launch. All smooth and dry road!

  • @olivierez3906
    @olivierez3906 Рік тому

    Merci beaucoup j’ai fais ma vidange complète avec le filtre huile etc heureusement que tu était là j’ai économisé 100e👍🏾❤️

  • @rydaPL
    @rydaPL 2 роки тому

    Super instrukcja. Właśnie kupiłem Moto i już nie mogę doczekać się sezonu. Ale wcześniej wymiana płynów ustrojowych :)

  • @alexvandettum4185
    @alexvandettum4185 3 роки тому +3

    Verry Good Video! Thank you verry much! But the music..... i like the real Sound of Work!!!

  • @PPL60
    @PPL60 4 роки тому +2

    Bien grabado el vídeo para no tener dudas.... Saludos.!!!!!

  • @Georgilla74
    @Georgilla74 3 роки тому +1

    To je dobrodzieju profeska....

    • @JacekKlauze
      @JacekKlauze  3 роки тому

      Dobrodziej dziękuje za dobre słowo :)

  • @bogumilbarczuk8679
    @bogumilbarczuk8679 7 років тому +2

    Super film, najlepszy obecnie:)

    • @JacekKlauze
      @JacekKlauze  7 років тому +1

      Bogumil Barczuk, dziękuję... Myślę, że nie ostatni. Sezon tuż, tuż.

  • @Kobra-kj3tt
    @Kobra-kj3tt 6 років тому +2

    Super robota. Pokaż nam jak wymienia się filtr powietrza i naciąga łańcuch. Bardzo mało jest filmów z Hondą NC700 więc każdy twój film jest na wagę złota! Pozdrawiam Sławek

    • @JacekKlauze
      @JacekKlauze  6 років тому +1

      Kobra 71, ua-cam.com/video/_QuVt2BU46I/v-deo.html a filmik o łańcuchu będzie w tym tygodniu.

  • @SlavikSG
    @SlavikSG 5 років тому

    Белоснежные перчатки, белоснежные салфетки... Прикольно! :)
    За видос спасибо!

  • @pg41226
    @pg41226 Рік тому +1

    Thanks for the video, but why the annoying music 😢

  • @romanvelky8611
    @romanvelky8611 Місяць тому

    když stojí honda na hlavnim stojanu studený motor, kde má byt hladina oleje na měrce? Při pouze vložené ? Potom se zašroubuje a olej ma být na měrce kde?

  • @dirkjensen7468
    @dirkjensen7468 2 місяці тому

    Good video. But next time choose a slightly less strenuous background music.😩

  • @garthhowe297
    @garthhowe297 6 років тому +2

    Good video ... the music made it all very dramatic!

    • @JacekKlauze
      @JacekKlauze  6 років тому

      Thank you. It's always dramatic when you replacing oil and about 10.000 people looking on your hands :)))

  • @Dubbuk77
    @Dubbuk77 6 років тому +1

    Всё отлично объяснено. Плюсую.

  • @smylesdanger6490
    @smylesdanger6490 Рік тому

    Thank you for the great video! What size is the bolt going into the filter wrench? Mine got stuck :(

  • @cameronmcrae4719
    @cameronmcrae4719 3 роки тому +1

    great video but do you have one about changing the coolant?

    • @JacekKlauze
      @JacekKlauze  2 роки тому +2

      Thank you. Yes, there will be such a movie this year

  • @AndreiBran
    @AndreiBran 5 років тому +1

    great video

  • @horserider9578
    @horserider9578 3 роки тому

    Video saved really good.

  • @Joez86
    @Joez86 6 років тому +1

    Nice job. Thank you.

  •  5 років тому

    Hi. very good video there. please tell me what kind of a tool you are using there with posibillity to define torque?

    • @JacekKlauze
      @JacekKlauze  5 років тому

      Thank you :) Proxxon 1/4" MC 30 6-30Nm

  • @adf763
    @adf763 4 роки тому +1

    Thank you my friend for this professional video but what about nc750x oil capacity 3.4 ??same nc700x ??

    • @SvenTSchixe
      @SvenTSchixe 4 роки тому +2

      Ahmed,
      Yes, 3.4 Litres of oil when changing oil and oil filter on the NC750X.
      Take care and be safe

    • @adf763
      @adf763 4 роки тому

      @@SvenTSchixe thanks a lot

    • @SvenTSchixe
      @SvenTSchixe 4 роки тому

      @@adf763 No problem buddy 🏍

  • @Richard-dh8ny
    @Richard-dh8ny 4 роки тому

    I like the look of your windscreen. Can you tell me while make and model it is?

    • @JacekKlauze
      @JacekKlauze  2 роки тому

      www.mrashop.de/com/model-based-products/honda/nc-700-s/bj-12/5790/nc-700-s/750-s-touring-windshield-t-all-years?c=90004571

  • @joaoalmeida1959
    @joaoalmeida1959 Рік тому

    I prefer Castrol racing full sintetic and you did not go to IKEA

  • @guglielmoatzori2945
    @guglielmoatzori2945 3 роки тому

    good video, perfect

  • @aalmeida
    @aalmeida 7 років тому +2

    nice

  • @ropeysubstance1719
    @ropeysubstance1719 2 роки тому

    is the bike on the center or kickstand for this video? shouldn't it be on the kickstand to get all the oil out?

    • @JacekKlauze
      @JacekKlauze  2 роки тому

      Only kickstand, like in my movie. If you want to be sure, you can always move the motorcycle left and right while draining the oil

  • @czaras_
    @czaras_ 4 роки тому

    Czy możesz dopisać rozmiar uszczelki dla głównej śruby? Rozumiem, że należy ją dokupić osobno?

    • @JacekKlauze
      @JacekKlauze  4 роки тому

      Tak, to jest zestaw w którym podkładka jest integralną częścią śruby. W każdym salonie Hondy od ręki.

  • @ARIAS1976
    @ARIAS1976 3 роки тому

    Gracias

  • @mikkei3532
    @mikkei3532 5 років тому

    witam - czujesz zmiany po zalaniu 10w40 zamiast 10w30 ? - mam ochotę zalać tu 10w50 full sysntetyka od castrola - bo znakomicie mi działały na nim skrzynie manualne w poprzednich cbr

    • @JacekKlauze
      @JacekKlauze  5 років тому

      Tak, trochę ciszej pracuje i mniej słychać zmianę biegów. Przy naszych warunkach klimatycznych 10w40 jest jak najbardziej ok, 50 trochę za dużo moim skromnym zdaniem.

  • @salwanass1
    @salwanass1 6 років тому

    Hi freind, just a question, do you have any probleme with this type of oil motul 7100 10w40 100% ? Because a freind have the probleme with his transmission dct after change the oil 10w40 7100 motul . Thankx

    • @JacekKlauze
      @JacekKlauze  6 років тому

      AK Art & Entertainment, no problem at all. The Gear box is working smoother than with 10W30. In my country 10w40 is the only solution.

    • @ZoltanFogarasi
      @ZoltanFogarasi 6 років тому

      What kind of problems does he have?

  • @Georgilla74
    @Georgilla74 2 роки тому

    A jaka to klawa muza Dobrodzieju miłościwy ?

    • @JacekKlauze
      @JacekKlauze  2 роки тому

      Taka na 43 tysiące wyświetleń :)

  • @stevetaylor8698
    @stevetaylor8698 3 роки тому +2

    I would very much prefer the sound of glugging oil to that ghastly "music".

    • @JacekKlauze
      @JacekKlauze  2 роки тому +1

      Me too. Music is dramatic, because It's always dramatic when you replacing oil and about 42.000 people looking on your hands :)))

  • @khalidaziz5991
    @khalidaziz5991 4 роки тому +2

    Had to turn off the volume. Could've played benny hill instead !

    • @JacekKlauze
      @JacekKlauze  2 роки тому

      In the next video I will try: ua-cam.com/video/MK6TXMsvgQg/v-deo.html :)

  • @ericeric4774
    @ericeric4774 7 років тому +1

    now do a valve adjustment

    • @JacekKlauze
      @JacekKlauze  7 років тому +3

      Thanks, but probably I will start season by preparing video tutorial "How to Increase power from 48 to 52 HP?"

  • @costamoreira4178
    @costamoreira4178 5 років тому

    Ikea