Love your channel Joe! Been following since last season! Just received my Davis shooter for 10-12 gpm…. I am using the 10gpm Softwash pump by North Star and my old shooter tip caused the pump to pulsate….. The Davis Shooter …. “Say Less”! No more pulsating and I swear without measuring that it shoots a little further with ease. I’ll know for sure tomorrow on the job…. Spray well Bro!
Hi Joe, Thanks for all the helpful tips. Can't wait to get my 8 gpm setup put on my trailer. Differently going to help me move faster with concrete cleaning. Stay cool... Michael C - (WA)
Thank you so much for you educational videos. Pardon me for the newbie questions, but this is too much for me as I’m trying to be proficient as I’m still new to this. What the different in using the Xjet as a rinse tool rather than using the M5 twist on the Neptunes Trident? I just purchased the combo DST with M5 Twist last night. I’m excited to see how much farther I can shoot with both of them.
I just got the Davis shooter tip and M5 in the mail so I can Awesome like you. How did you tighten the Davis shooter tip since it’s fragile material? Hand tighten or wrench?
Hi Joe, I currently run the ladder saver and just purchased the Davis shooter. What do you run for rinsing to get the same distance? Or do you shut off the sh to rinse? Thanks
Love the set up. I’ve been using the m-5 on my 12v this season. I think i asked you not that long ago if you have tried it. Dropping down to a 2-3 gpm m-5 for the 12v is the move. 🙏💪❤️. I need to contact you for my T shirt!!! Perhaps I’ll try again Monday night if not to late.
Its gonna be a hot summer! Mid 80’s to mid 90’s all last week, and humidity in the 90s as well down here in South Carolina! But really we just have four different versions of summer instead of seasons so it is what it is! Wash on brother!
I’d love to be able to adjust my downstream SH. I’ve been cutting it 50% on house with delicate flowers and have been having amazing results. Sometimes I want full strength though
I guess Im on the same page as you. I only run SH when washing a house, no soap. Soap is useful when it comes to a steep rood and I will use it then but I dont see wasting money on product especially if its not really needed.
Just a thought for keeping it simple, when we added the 3/4HP Booster, it kept the ladder on the truck and added up to 20 feet depending on weather conditions
Hi Joe You didn't whistle when you were measuring, maybe it's just to hot to whistle. I'm with you, I hate it when it goes from 60 to 90 degrees.😖 Great video 👍
What people don't understand is that if you own your company every little thing have so much value because you bought it in need after you encounter a day of struggle. And it's all about efficiency and beating your self up in every job. I live pressure washing and the more toys you have the better 😅
Two banger that's all you need some sunny boy
Love your channel Joe! Been following since last season! Just received my Davis shooter for 10-12 gpm…. I am using the 10gpm Softwash pump by North Star and my old shooter tip caused the pump to pulsate….. The Davis Shooter …. “Say Less”! No more pulsating and I swear without measuring that it shoots a little further with ease.
I’ll know for sure tomorrow on the job….
Spray well Bro!
✌🏼❤️
Thanks Joe !
Hi Joe,
Thanks for all the helpful tips.
Can't wait to get my 8 gpm setup put on my trailer. Differently going to help me move faster with concrete cleaning.
Stay cool...
Michael C - (WA)
Without a doubt
Thanks Joe ! I like your comparison tests. keep it up. 🙂
✌🏼❤️
Thank you so much for you educational videos.
Pardon me for the newbie questions, but this is too much for me as I’m trying to be proficient as I’m still new to this. What the different in using the Xjet as a rinse tool rather than using the M5 twist on the Neptunes Trident?
I just purchased the combo DST with M5 Twist last night. I’m excited to see how much farther I can shoot with both of them.
The Xjet is a higher pressure nozzle. The m5 twist is lower pressure, better used for house washing
@@powerfulimprovements thank you for clarifying. I should have made a trident just like you then
@@Allcoastlawnandpressurewashing I currently use a 2 bangers also. M5 and shooter. Rare do I need the Xjet
@@powerfulimprovements thanks for the info. Whatever you do I’m comfortable in mirroring, since you are the Professional
@@Allcoastlawnandpressurewashing 😂😂✌🏼❤️
I got a bunch of stuff sent over to Australia, Kyles stuff is the best
Certainly
I just got the Davis shooter tip and M5 in the mail so I can Awesome like you.
How did you tighten the Davis shooter tip since it’s fragile material? Hand tighten or wrench?
Wrench snug
@@powerfulimprovements awesome thanks for the quick reply Sir
Love my Davis shooter tip.
Hi Joe,
I currently run the ladder saver and just purchased the Davis shooter. What do you run for rinsing to get the same distance? Or do you shut off the sh to rinse?
Thanks
Turn sh off
Great video thanks
Great information thanks
✌🏼❤️
146?
I mean, did we really have an option other than walking with you? Geesh!
DUH!
He may have had heat exhaustion. He said it was 146 degrees!!!
@@joeschmitz2790 I think it was more of the humidity is in the heat.
@@TheFreshRinse I mean Joe doesn't really make those funny noises you do while measuring distance 📏
The other choice is to unsubscribe
Joe where did you get the brass extender?
Local hardware stop
Love the set up. I’ve been using the m-5 on my 12v this season. I think i asked you not that long ago if you have tried it. Dropping down to a 2-3 gpm m-5 for the 12v is the move. 🙏💪❤️. I need to contact you for my T shirt!!! Perhaps I’ll try again Monday night if not to late.
Its gonna be a hot summer! Mid 80’s to mid 90’s all last week, and humidity in the 90s as well down here in South Carolina! But really we just have four different versions of summer instead of seasons so it is what it is! Wash on brother!
🔥
I’d love to be able to adjust my downstream SH. I’ve been cutting it 50% on house with delicate flowers and have been having amazing results. Sometimes I want full strength though
Use different size Downstream injectors or swap out orifices. 2.3, 2.1, 1.8 etc. all draw different. Use straight sh and control with injector
@@powerfulimprovements great idea!
Hey Joe will the 2-3 gal m/5 pull soap on a 4gpm?? Just wondering so I have a little bit more punch!! Thanks
Good morning it’s Joe deary and it’s 146° outside 😂 made me crack up
Well it was
I guess Im on the same page as you. I only run SH when washing a house, no soap. Soap is useful when it comes to a steep rood and I will use it then but I dont see wasting money on product especially if its not really needed.
Agreed
Great test between the 12 volt and the Pressure Washer, Have you considered incorporating a booster into your 12 volt system
No I have not. Keep it simple
Just a thought for keeping it simple, when we added the 3/4HP Booster, it kept the ladder on the truck and added up to 20 feet depending on weather conditions
Hi Joe
You didn't whistle when you were measuring, maybe it's just to hot to whistle. I'm with you, I hate it when it goes from 60 to 90 degrees.😖
Great video 👍
Yeah too hot to whistle 😂✌🏼
Hi Joe, thanks for the video. love it. The brass male to male for the nozzles. What size are those generally and where did you get them?
Lowes
I run the Davis shooter on my 8gpm pressure pro and shoots about 72ish feet
💥💥💥💥💥
I’m sure your pressure is set higher than mine
I am having trouble getting past 35 feet with my Davis tip on an 8/40 setup. How are you achieving this distance?
What machine do you have and what psi are you at? To get 72 feet?
Joe will a 4-5.5 gpm shoot just as far with less volume?
With a properly rated gpm tip you should get nearly the same distance. I was hitting 3 stories with my 4gpm
@@powerfulimprovements thx joe!
Did you move away from the remote system? Is that why you put the valves on to turn on and off chem?
Nope. Just want to be able to cut the flow so it doesn’t drool when not in use
You da Man !!!
Where do you get that brass piece for the m5 twist
Lowes
Joe how come you cut your soap out completely? Why are you changing now
I have been using less and less over the past couple years. It has little to no effect on cleaning. SH does the work
Joe’s neighbors are like “what’s he doing now?!” Why’s this guy always spraying his driveway???
It keeps them entertained
How is that flow pro holding out for you
💯
I tried a shooter tip on my sw system didn't feel a difference in distance
It’s not dramatic. They aren’t very powerful to start with
Stainless steel FTW!! Aluminum and SH don't get along very well 😬
Davis accessories are the sh*t! I recently bought the 3 banger and shooter tip to put with my M5.
🔥🔥🔥
Meanwhile neighbors are like what is that crazy guy doing spraying water in his driveway talking to himself into a camera
😂😂😂
Nice Joe. I detect a little jealousy in Mike. 🤣🤣
😂✌🏼❤️
I live for gadgets but you went to far 🤣🤣🤣🤣
😂😂
What people don't understand is that if you own your company every little thing have so much value because you bought it in need after you encounter a day of struggle. And it's all about efficiency and beating your self up in every job. I live pressure washing and the more toys you have the better 😅
@@mikeevansgutierrezcasanas6234 agreed
1st?
Legit 💥💥💥💥💥