421cc 4mil REDLINE SERVAL YAMAHA BANSHEE BUILD
Вставка
- Опубліковано 5 жов 2024
- Giving a Banshee tour & talk about some of the mods I've made to it.
Duner Banshee October 2017
The specs for the Banshee are:
421cc Ported Serval Redline Racing Built
redlineracing.b...
24cc domes pump gas Noss cool head
35PWK 50 pilots, 3rd clip, 155 Mains, 1.5 turns out, Sea Level
4 degree timing
V-Force 4 reeds
Shearer Small Bore Pipes with Cascade 93db Silencers
Gearing 14-42
22" Ultra Lights Skat Trak 12 Paddle Tires
Klotz Benol or Yamalube Oil @ 40:1
#BANSHEE #421SERVAL
For Questions Or Business Inquiries ► thewestcoastroller@gmail.com
Im so glade you talk about working on your bike and stuff and little details.
Gaming in HD I'll be doing more banshee videos when I return to the coast in the Spring. Thanks for watching
West Coast Roller ill be waiting 🤠.
Gaming in HD 👍👍😀
Very cool man! My GF and I have talked about getting into these. Have fun man!! BTW, you have been knockin out the videos lately! Great job!!
It's a fun sport if you live near the dunes. I've been hitting the videos!! 👍✌️
you got my attention all smiles
I know this is an old video, but exactly what color is your frame and swingarm? I really like the color. Is it powder coated or painted?
It's painted. Not sure exact color. It might be factory. It's a 2004 frame.
nicely built machine. Not a fan of blue but man im just loving the look of this. Got a question or maybe somebody can help me here, i got a 02 banshee that's bored .40 over, with vitos " fat bastard " pipes and silencers, pods, and v force 3 reeds. Has fresh top end with about 4 tanks of gas through it since then, so far i noticed its been cutting in and out untill about half throttle, then power comes in. Bike idles, sounded fine. Yesturday went outside and fired it up, let it warm up and just as i started leaving it was cutting out super bad and it would just bog down when i give it throttle, any suggestions? Im running 340 main, im about 1600ft above sea level. Im guessing its a jetting related issue
It sounds like jetting......could also be your throttle cable and slides are out of adjustment or carbs out of sync with each other......make sure slides are opening all the way..........check that out and of course check that your carb jets are clean pilot and main....
West Coast im pulling it apart now, seems the right slide is up just a tiny bit more then the left, when i say tiny i really mean like a 1mm. I have a set of 220 mains i could throw in but i feel like thats to big of a jump down..but im 90% positive its just rich or its a air leak. Im not very good with jetting so excuse me if im not making much sense
340 sounds good do not put 220 in too lean...............mains will only effect 3/4 - full throttle......what clip is needle in?
with those reeds you should try a 27.5 or 30 pilot
West Coast Roller im gonna finish eating then im gonna go rip the carbs out and take them apart and let you know what pilots i got and what position the clips in. I got a set of 25 pilots laying here but ill have to order the other 2 sets you metioned.
How much does a Banshee like yours cost to buy and set up ?
Great question.........banshee's with aftermarket goodies can be picked up pretty cheap...so depends on what you get into the bike for.....the engine build on this one alone is around $2500 on the low end....not including pipes.
Do you have the cheetah cub cylinders?
Serval cub...lower port timing than cheetah
Yeah i had Cameron at redline build me a 421 serval. Im happy. It made 82 hp on pump gas with t-5 pipes
Right on....Cam builds the best motors period...have fun!
Whats the difference between a 421 serval and 421 cheetah cub?? Is it just port job on cylinder? Thanks
Serval has lower port timings for more bottom mid range performance with some punch on top. Cheetah is more drag porting for top end performance.
more broader power band across the RPM range with a serval vs cheetah all power up top.
I have 38 inch Super Swampers on my Banshee.......:)
NWHiker 😂😂😂 That made my evening that much better lol. Thanks for the laugh🤠.