You know what would look even cooler? If the dude actually had a cb in his truck. Rather then running antennas with coax could actually have a cb. Idiot’s without cb radios cause accidents
Taking care of bidness my brutha! I use the Gorilla glue, the silicon and construction adhesive and especially their clear tape! They have a variety of duct tape too. All their products are awesome! Enjoyed the video hermano and the lights look good on the truck and trailer. Especially in that darn near pitch black job site! Stay safe my brudda👍🏿✌🏾
looking good with the equipment moving, trying to get into the equipment game myself been driving few years general freight but what you doing is a specialty. Thanks
You can go to a junkyard... it’s a little rare but you can find a mint 03 T800 dashboard for cheaper than the dealer. You can also try Ebay. Good ole Ebay
I feel a tilted wheel like that would be more ergonomic for the same reason as the tilted knob, don't need to reach that far to use it, if I was driving I'd put the wheel like that
Bro, use gorilla glue to fix the broken frame, but use hook and loop (velcro) for the panels. If you have to do anything behind those panels, you will break the frame trying to get it apart after you use gorilla glue! You can bolt "L" shaped brackets to the back of the panels and then use the velcro between the L brackets and the sides of the frame.
That link I gave you shows 4/15/2021 list date, jump on it brother. Also, Miami Star has a fiberglass t600/t800 dash, but the girl on the phone was too lazy to check. I saw the Miami star dash on IG
Lo mejor que puedes hacer cuando lo consigas es cambiar el dash por uno moderno se va a ver mucho mejor es mi opinión personal que no te esté malo mi comentario es que en mi país puerto rico lo han hecho y se ve precioso esos kenworth
Bro have some one fabricated it for you rather spend $3500 take it apart and do mole and epoxy it up actually you can do that your self and save money custom it how you want it
No hate .. but heavy haul is not six axles.. that’s just slightly overweight... and better chaining techniques will help you be a better Driver down the road. Good Luck ✌️
U can try Desadia Fiberglass (Forgot the actual D Word) for a custom fiberglass dash for kenworth or if can't get it idk what other shop Edit: I remembered the shop name is Talladega Fiberglass Maybe they can try making a nice Fiberglass dashboard for your Kenworth Kenworth lookin good
You know what'd look cool as hell imo? Sequential turn signals on the t-bar, since theres 4 circles, sequential could be pretty rad looking
That’s a great idea man. I will Definetly ask Freddy at the chrome stop about that
En español mejor
@@Grtruckingdemolitionllc Awesome! Gonna be looking forward for that bud!
You know what would look even cooler? If the dude actually had a cb in his truck. Rather then running antennas with coax could actually have a cb. Idiot’s without cb radios cause accidents
Que pasa que ya no se miran vídeos nuevos Suyo o con los Herreras.
Beautiful truck and it’s nice seen how you love your toy and fixing things on it , salute my friend 👍🤝 that beast sounds healthy 🔥🚗
Taking care of bidness my brutha! I use the Gorilla glue, the silicon and construction adhesive and especially their clear tape! They have a variety of duct tape too. All their products are awesome! Enjoyed the video hermano and the lights look good on the truck and trailer. Especially in that darn near pitch black job site! Stay safe my brudda👍🏿✌🏾
💯
hello amazing video compliments always excellent engine sound hello to the next one
Arremachalo viejo hammer down awesome kenworth 👍
looking good with the equipment moving, trying to get into the equipment game myself been driving few years general freight but what you doing is a specialty. Thanks
The wood looks like Black Iron wood 🪵
Awesome heavy hauling video
Your truck would look sharp with some super singles up front!
Super singles look good on stock height or taller trucks. I would be rubbing if I went with super singles
@@Grtruckingdemolitionllc Yah I had forgotten you went with air ride up front!
Those lights are badass compa
Yo almiro mucho su trabajo y Despeño como trilero .Tengo un hermano que es camionero Aquí en Honduras sele felicita y Dios lo Guie en su proyecto.
Badass video!! Awesome truck!! Keep em rollin 😎🤘
I saw you in Channelview west bound on I 10 tonight. I was in that group of oversize loads on the feeder road.
Awesome man, I seen you guys that looks like fun, running in a convoy 🤘🏼
Buen video como siempre Gerardo, y cada vez mas chingon tu camion...saludos...!!!
You can go to a junkyard... it’s a little rare but you can find a mint 03 T800 dashboard for cheaper than the dealer. You can also try Ebay. Good ole Ebay
I definitely have to ga back to some junk yards
@@Grtruckingdemolitionllc yea u can find mint parts for cheap
Puttin in Dat HEAVY DUTY HAULIN WRK!!!!! 💯😎🏆💰
Nice work man keep on trucking love the video,s
I feel a tilted wheel like that would be more ergonomic for the same reason as the tilted knob, don't need to reach that far to use it, if I was driving I'd put the wheel like that
Go to Harbor freight and buy the plastic weld kit it will work a lot better it’s like soldering for plastics
Bro, use gorilla glue to fix the broken frame, but use hook and loop (velcro) for the panels. If you have to do anything behind those panels, you will break the frame trying to get it apart after you use gorilla glue! You can bolt "L" shaped brackets to the back of the panels and then use the velcro between the L brackets and the sides of the frame.
Vinyl paint in the correct color may help your dash
I work for a trash company Monday through Friday and it’s kinda creepy to be out there at 4 in the morning going through wooded areas
BIG NICE VIDEO AMIGO ! 😎🤙🏼
I hear banjos. GET OUTTA THERE MIKE!
Theres some really good info available on YT on how to lay carbon fiber. And I havent seen carbon fiber dash yet
next is to move that range selector up to the knob.
For your intro you should put calles de Huston but find the one that is not copy wright 🔥
I got my dash for my 2000 w900 for 300 from a junk yard over here in chicago the whole skeleton no dash panels
Much better steering wheel. But can’t you tilt the whole steering column further back? Maybe with some other supports?
Trailer deck looks good 👀
That link I gave you shows 4/15/2021 list date, jump on it brother. Also, Miami Star has a fiberglass t600/t800 dash, but the girl on the phone was too lazy to check. I saw the Miami star dash on IG
Where did you post the link bro ? I have to check out that Miami star fiberglass dash
one link for the Miami star dash. it was on IG, the other link is Truck Parts Inventory, a nice dash out of Phoenix
Damn nice work
You should checkout Copart to see if they have a KW dash from either a T-Series or W900 that you can get.
See if you can find a used t300 cab or something that might be more available, maybe cheaper, and you could probably sell the rest of the parts too.
and the cabs are pretty identical I think
Saludos desde República Dominicana 🇩🇴 bendiciones 👍
Been watching for a min great videos homie VIVA LA RAZA💯💯🇲🇽🙏🏽
Nice truck
Look up Kenworth dash skelton on Google there is a lot of them for sale.Some are preety good.
👍🏼
Great video Boss
The wood on the lowboy looks like Caoba, but since you are in the US I doubt that is actual Caoba.
Nice video overall. Tell you what you definitely are super busy but keep it up.
Nice truck. Fun to work on right?, i would love a semi.
Bro, you have to wet the parts that you apply that type of gorilla glue to. And be careful, that shit expands when it cures with water.
Yea I ignored that part of the label 😬 I started to wet the rest of the places I applied the glue to thou
And that cup holder
Saludos desde Saltillo Coahuila México
Where did you get that front bumper
Valley chrome
Vander haags might have one on there website.
How much practice does it take to get the hang of backing the neck on the deck?
Pretty easy, I just line up the watermelon light on my t bar to the edge of the lowboy and goes right In.
“It don’t move”
Try 3d printing those brackets, I'm sure you know someone who knows someone.....
They sells a lot of dashes for trucks
T800 is a lot harder to find. Freightliner classic, coronado, century/Columbia and Peterbilt are way more common.
@@TheRoadhammer379 ya true
Lo mejor que puedes hacer cuando lo consigas es cambiar el dash por uno moderno se va a ver mucho mejor es mi opinión personal que no te esté malo mi comentario es que en mi país puerto rico lo han hecho y se ve precioso esos kenworth
La verdad me gusta el estilo de este tablero. También me gusta el moderno. Pero prefiero tener el original.
Definitely need an oversize permit bro for that mini-ex 😂
How’d you start heavy hauling bro?
I does the gorilla glue part 😂😂😂
Saludos desde culiacan
En español es mejor si se entiende
Im late watching been busy but beautiful vid man always a perfect vid HTine Hold It Dineee🤘🏽🦍
What type of camera's do you use for the videos
It do be hot af I’m Texas
Hey try Miami Star Truck Parts
Bendiciones en tu camino 🙏🙏🙏🙏🙏🙏🙏💚💚💚💚👍🏻👍🏻
Red and bleu = purple 🤔🤔👌👌👌👌😉😉😉❤❤❤❤😍😍😍☝️💪💪💪
Gorilla glue everything 🤣
saludos bro good video. puro trokiando Money @trokiandoMoney saludos from all the way from CALI
What brand is your rgn?
don't need seatbelt in truck?
Do you guys own that 210GLC?
Klk hermano bendiciones
Muy buenos videos amigo 💯 que app usas para las cargas ?
Do you do meet n greet with fans?
Its been a while man
Activo 💯💯💯💯🔥🔥🔥🔥🔥
it would be nice to put a 18speed on this truck
Her hair is like that for a very long time. She can take many showers... her hair would be like skin it won’t move and would be super slippery
Tell fld life if he can help you with your dash
He’s to busy with work man
use plastic welder on that dash
Duel is always the cheapest.
Bro have some one fabricated it for you rather spend $3500 take it apart and do mole and epoxy it up actually you can do that your self and save money custom it how you want it
No hate .. but heavy haul is not six axles.. that’s just slightly overweight... and better chaining techniques will help you be a better Driver down the road. Good Luck ✌️
Why don't you guys have hydraulic thumbs on your excavators?
you need to get yourself Helmet GoPro its better to record while walking around with the camera in your hand..
I do have some POV videos. I have the head mount. Have not done one of those in a while great idea thanks.
@@Grtruckingdemolitionllc keep those great videos coming i love them :)
Primerooo🇩🇴🇩🇴🇩🇴🇩🇴🇩🇴
35 hundred for the frame dash oh well...
Crees k puedes decirme Cuanto te ese t800???
More worried about the camera and looking cool rather then worrying about dumping his truck in the ditch 🤦🏼♂️
U can try Desadia Fiberglass
(Forgot the actual D Word) for a custom fiberglass dash for kenworth or if can't get it idk what other shop
Edit: I remembered the shop name is Talladega Fiberglass
Maybe they can try making a nice Fiberglass dashboard for your Kenworth
Kenworth lookin good
Great idea I’m going to give those guys a call
Get an older style dash ... better quality
Your equipment gets beat up a lot
Man Kenworth loves to rip you off start shoppin online!
Don’t use gorilla glue dude
if you lift your seat up you will be able to see over the dash why are you sitting on the floor
En ingles no tienes chistes y no se te enriende nada de nada
En español
is. SOccool
Klk hermano bendiciones
Do you do meet n greet with fans?