TOOLS FOR RIGGING ASSIST HOOKS
Вставка
- Опубліковано 3 жов 2024
- Hook me up with a LIKE if you found the video useful and leave comment why!
Subscribe AND CLICK THE BELL to stay updated! ►: bit.ly/thefish...
#fishing #howto #Videos
This video is about the tools for rigging assist hooks and how to use them. There are a few items here you can see that might help you with your assist hook tying - doing them faster and cleaner.
The tools outlined are very basic - you can even make your own if you are handy with some tools and material, of course you can buy them as well.
I hope this helps people as I know there are a lot of people that tie with just their hands and not only does that hurt - it is also quite an inefficient process.
@TheFishingKit 1374657803$!$%%@)*$#)!1thneonglnsiwbttatest
Does putting the hook through the line weakens the line? Would binding to the shank directly with a half hitch be more reliable?
Hi TDoo thanks so much!!!! first ever super thanks for me!!!! Actually, not really. This is pretty standard. The knot slips if you do it on hooks without eyes. And you only ever pass the hook through the line with spade heads not with eyed hooks.
@@TheFishingKit Thanks for taking the time to respond. Very good instructions. Glad to be the first person to give you super thanks :-)
@@tdoo6024 My pleasure! I am in the process of doing another one of these videos. It will show more of the process, tools and putting together different types of assist hooks.
I have to say Kit
You have completed my lack of know-how
Your statements so clear and your expalining so consinstent.
I fish shallow waters,nothing to match with heavy jigs I go no more than 100 grams for my lures but your knowledge gave me a really good way to understand what I am doing and more important why.
Thanks thousands from a fisherman from florence,italy
Great information for beginners....who want to tie own assist hook and save some money...kudos
Exactly!
Good presentation my friend..much appreciate
thanks for watching!
Great Video ! Thank you ! Lots of great advices.
Glad it was helpful!
Hi, where do i buy the black tool that holds the hook?, thanks for the video!!
it's called a fly tying vise - look for them on ebay or amazon.
Great video, thank you for sharing
Thanks for watching!
Thanks Mr. Kit for information
And why don't use fly tying thread, I asked because I can't get thin bread under pe.1 in my country
fly tying thread is weak
@@TheFishingKit 🙏🙏🙏
@@TheFishingKit
Is there any way I can use it?
I fish with jigs from 10 to 50.g max
If not what the size of bread suitable for me, and size of cord like you said depends on hook size,
to me it's ok between 0.5mm to 1.mm
sure you can...just dont expect them to last or hold bigger fish.@@tamerabdelaziz.
What type of thread are you using? Is it the same thread used in sewing?
Nonits not. It is thin braid
obrigado companheiro,saude
Você é bem vindo!!!!
thanks for this video
:)
Well done sir ..thank you 🤙👌
Welcome 👍
hey man. What assist cord pound test do you suggest for slow pitch jigging?
depends on what weight jig I use, and hook size...or what I am after.
I'm a little confused on another video where you were discussing assist hooks you mentioned that for these kinds of hooks you should wrap the cord/Kevlar at the bottom part of hook shank. However in this video you wrapped on the top part.
does the other hook have an eye or a spade head?
@@TheFishingKit in the other video the hook had a spade head. You were discussing why wrapping of the cord should always be on the bottom section of the shank. It was your video where u were taking about assist hooks in general - Assist hooks what you need to know - I left a comment there too mate.
Did I pass the hook through the cord?
@@TheFishingKit in this video yes, in the assist hook video I think it was a factory tied spade hook you were discussing. Maybe go check out the comment I left on that video. I just want to know which would be a better method of cording the hook.
@@sanjeevvadaketh5620 I knew what you were talking about - but I'm pointing out why. There are several ways to do things. The most important point is that the assist cord that pulls on the hook should be on the side where the barb is - since it is the point that dictates the point where the origin on your pull comes from - putting it on top will direct it upwards and away from flesh - it doesn't mean you won't catch fish if you put the tow point origin on top, just that you will miss a lot more.
Hi Kit, I'm shopping for a rotating fly tying vise but most are rated up to size 4/0 hooks. Any recommendations on a brand that can handle larger hook sizes? Thanks
Some of them can handle bigger, they just sont say it - best to go to a flyshop and test out few
Good Video. Can you please tell me what is the proper name/ of the needle you used.
I looked for ''cultiva splice needle etc. and I didnt have any luck.
Is there a model number you could share ?
Thank you
amzn.to/3GU0TFp
Thank you sir.
Do you like this one best for splicing assist cord or is there a latch needle that is better suited for assist cord ? I do have a couple (short) latch key needles but I find them too short for my taste and would prefer something closer to 8 inchs or more.
I dont know what size (latch) is best to get.
Iv been looking at the DaHo but again, Im not sure what size the latch it should be. I really dont see me using any assist cord above 400 or below 300. Any help would be greatly appreciated . Thank you.
I started using long sewing needles lately. like these amzn.to/48uAEkw I am actually liking them better @@kingdavid2684
@@TheFishingKit Id like to see a demo / video of you using those needles...maybe some day.
I am not sure if I have uploaded them already, but I have videos of me using the big needles. Check the newer videos on of me rigging a single hook on a jig see if I show it. But I know I did quite a few videos of me using them. (used a long one and a shorter one) @@kingdavid2684
Hello, What is your recommendation about thread, number, deniers, material, brand, waxed not waxed?
Firstly, don't use fly tying thread. Go online and look for very thin braid. I use Japanese 0.4 braided fishing line - amzn.to/44r5xEb
Thanks!
Thanks for the great info ! I have a question whats the name of the blue tool whit the 3 stubs you use to put the hook and pull tension on the line ? Never see one like that one and would like to get one thx.
the company that makes that has closed down. ua-cam.com/users/shortsD_FMHgqgBwE
@@TheFishingKit Thanks ! I going to make me one.
Awesome.@@luen6630
What is the best and cheap assist hook rigging set in ali express?
there is no such thing. just get the best vise you can get and a bobbin holder.
Hi Kit , is that a standard vice for trout fly's or bigger one for jigs?, Thanks brother
thats just for fly tying...you dont need anything fancy just the right jaws to hold the hooks you want. That one in particular is the cheapest Griffin vise.
@@TheFishingKit thanks Brother 👍
@@Billyfishing_watch my pleasure!
Hello, where can I find this clamp for the construction of assist hooks I use BKK hooks of 3/0 ~ 4/0 ~ 5/0 can you give me some help.
I usually use a pressure pliers and so I always have one hand busy holding the pliers tight, and it's not nice.
@@leonardopersico3039 hi brother, it's not my channel you need ask Kit😊👍
What brand ceramic scissors are the ones in your video?
Prox
Hello, I was watching the video and I quite like the splicing part. I tried it with my standard assist cord and I have to say I was not very lucky. I understand the right way to do it is to get a hollow-core assist cord but it does no seem to be very easy to find in Dubai. Any suggestion about where to get the cord?
hollow cord is all over the place in Dubai - barracuda fishing in shk Zayed road is a good place to start.
@@TheFishingKit, thanks a lot. I know the shop, will try they. Keep up the good work, very nice and informative videos.
Hello, great tutorial! Can you please help with a couple questions. At 4:23, what kind of threading needle is that and do you know where I can buy? Also what fly tying hook clamp is that? Thanks in advance!
it is a threading needle from OWNER. the vise is a montana mongoose from Grifin enterprises - might not be practical for just tying assist hooks, but since I tied flies in the past, I invested on it.
@@TheFishingKit thank you for the reply!
Hi Sir, is that bobbin spool made with alauminum? If so, what brand is that and where did you get them from? Thanks.
I bought it from Barracuda foshing equipment in Dubai. It is aluminum.
Thank you sir!
:D
Do i need montana mongoose vise if i just need to tie assit hook? or just get the normal or the best i could get from local will do?
You can use any vise. I just happen to tie flies a lot before and my main vise was a montana mongoose. Just make sure it is able to hold the hooks you want to tie securely.
@@TheFishingKit What about the width of the mouth? does 1mm enough for slow jigging hook?
@@danielchong2234 it depends on the size of the hooks and jigs, you are going to use right? are you going to use 1000g? 1500? or 10g and below? The only person that can answer this question for you is?
Ok understand, thanks
Could you write the names of tools
Because my English not good enough to catch names from video 😅
THREADING NEEDLE from OWNER
BOBBIN HOLDER from OWNER
XL WHIP FINISH TOOL from OWNER
ASSIST HOOK HOLDER/SPACER from Angler Support Service
FLY TYING VISE montana mongoose from Griffin enterprises
Braid Splicing Needle Free from Owner Assist Cord
Super Glue
Blue Flame Lighter
Thank you very much 🙏
Go ahead I have learned a-lot of things from you ❤
You don’t say what products you are using, poor tutoril
Even in the thumbnail you actually see the brand - poor eyes, not poor tutorial, even dumber comment.