Got state reffed in cali for this exhaust with no other mods and probably selling it now for mxp. sucks daily driving and having to be scared for no reason and I got a near bone stock car
did you just remove all emblems/badges off the car? how did you cover the holes on the back and front? and what about the indentation for the emblem in the front did you just leave it there without sanding it? does it not look bad?
Yes, I used bondo to fill in the holes then sanded it down. As for the indentation for the front emblem I left as is since it’s not a circle but out like the BRZ or 86 bumpers. Although it would look better if you filled it in. I didn’t look bad either
@@SSJDanny I got a gt86 2019 and I'm gonna be getting another 2020 or 2021 one but I was jw if removing the toyota badge on the front and the one on the back would look bad without filling it in
Not too sure if the overpipe made a difference tbh. But since I was already down there changing the front pipe just decided to change it. Traded some coilovers for the tomei lol Brand new is gonna be at least 1.1k minimum
Just got the tomei installed yesterday and i’m planning on going on super lows. What tips or issues have you run into with bags and a tomei. I saw how it sits on the ground while aired out.
I do hope someone sees this cause I'm also in the same limbo if that makes sense. I don't want a Tomei exhaust just because I don't want it to be super loud, but I do want the pops and bangs (but not this aggressive if that makes sense?) I'm looking into getting the Borla headers with the MAPerformace duel catback 4" stainless exhaust. Does this sound like a good setup to run?
Touch choice. A catback paired with any Header is going to be loud, just be careful which catback you choose because some will make your car sound raspy instead of deep 😬
True true. I watched many videos on different cat backs and for me, the MAPerformance duel cat back sounded the most tame but still had that deep boxer rumble. I don't want it to be SUPER loud like its straight piped. The video I watched is on the MAPerformace yt if you can find it. A guy reviews like 5-10 exhaust. Then I saw the Borla header and thought that it would be a good solid pair for the car @@SSJDanny
Being catless will allow you to have some pops here and there between shifts and downshifts without a tune. But if you want loud pops and on command I’d suggest a tune.
Do you think running 60r instead of 80 with the same set up would be a big difference ? All tomei 80 is pretty much out of stock and 60r is the only available where I live right now
Yes biiig difference. Like I mentioned in the vid the 3 inch diameter makes a really big difference. The 60r would probably sound raspy and high pitched
The R series are designed for track racing performance and not necessarily for sound. If you are NA and insist on a Tomei exhaust I would suggest the Tomei Type 60s. It's tuned with NA performance and sound in mind to make it more comfortable and enjoyable for everyday use. If you use a type 80 while NA not only will you lose torque in the lower RPMs but it will be obnoxiously loud, more so if you are using an exhaust with one or no catalyzers. Other recommendations are Fujitsubo Authorize, Greddy Comfort Sports, Counterspace Garage's Touring, or HKS.
@@mresab1997 I think at the time it’s what was in stock. But even after comparing exhausts with others who had a tomei header and the same catback, mine always sounded a bit deeper which I like. Tomei is great! Just never got around to switching because I never had any issues with the Borla V2. But I guess I’m just lucky mine haven’t cracked as most people would say lol
I enjoyed your video, but if you take it to a dyno I can probably guarantee you are losing not only torque but maybe even power. I'm speaking from personal experience. You might gain a few hp up at the very top near 7K, if any at all, but the lack of proper exhaust scavenging and the turbulent airflow is probably costing you power. As much as I like the sound, if you want performance you are better off with stock or a full 2.5 to 2.75 inch exhaust setup. Only use this exhaust if you're FI. If you want even louder, God help you and everyone else around you, you should just strait pipe the entire exhaust.
@@SSJDanny you're welcome. I had OFT before with stage 2+ tune and I made maybe 192 HP with the Greddy Revolution RS, nearly identical to the Tomei Type 80. With a transmission control factor accounting, maybe 168 ± 5hp at the wheels at a hub Dynapak. Granted I don't have access to ethanol but Japanese high octane is 93 to 94 AKI equivalent I believe. Now that I'm turbocharged I use the Tomei Type 80, but I'm still working out how to keep turbulence down or eliminate it because I'm still using stock front pipe, everything else is HKS turbo manifold and Tomei exhaust parts. My goal is to have the diameter from the Tomei overpipe transition as smoothly as possible to 3 inch if I'm able to, and hopefully that will increase scavenging, reduce what little lag I have, and increase lower end torque. I'd love to help you out if you have any questions in turn. I'm currently using EcuTek and used Delicious Tuning but will change to a local tuner in Japan or use CSG's Zach since DT screwed me.
More exhaust vids! 🗣
bro if I see you pass by me i would follow you just to admire the car's sound and aesthetic
Lil cruise 🤙🏽😂
the amount of times I hear Chris or Dany drive by chick fil a making pops or just hearing their exhaust in general, i can tell who is who driving by.
The go to spot 🤣🤝🏽
Frfr i gotchu with the honey mustard next time you come by tho😮💨
I will 100% get this setup once i get my brz
You won’t regret it! 🔥
It’s nice to see that Chula is alive and well with the car scene.
Yessir 🤙🏽
6:02 POV vids be like that 😂 Got you driving the most random places
Probably made like 2 U turns in that area 😂
your car’s actually nuts 🔥
Thank you! 🙌🏽
Always loved your car in Chris’s videos🤙🏻
Thank you! Means a lot 🤝🏽
i fw the car bro🔥i live in bonita and always see yours and chris’ brz/frs
Ayye appreciate you! 🤝🏽
Need more pov videos ?
Bet! 🤝🏽
Sounds like a Spec D but louder, more aggressive and better I have one on my Honda but they different
Got state reffed in cali for this exhaust with no other mods and probably selling it now for mxp. sucks daily driving and having to be scared for no reason and I got a near bone stock car
Damn! Been driving around with this setup in Cali for almost 2 years now luckily without getting pulled over
Love the car sounds great
Thanks!
pops need louder. this sounds like it's a cutie
Bet 🫢
3:54 Nah, not everyone, but it somehow sounded like it was meant to be reved there
Right haha
Love your car man! the uk just isn't made for wide bodies 🥲 what is your entire exhaust setup?
did you just remove all emblems/badges off the car? how did you cover the holes on the back and front? and what about the indentation for the emblem in the front did you just leave it there without sanding it? does it not look bad?
Yes, I used bondo to fill in the holes then sanded it down. As for the indentation for the front emblem I left as is since it’s not a circle but out like the BRZ or 86 bumpers. Although it would look better if you filled it in. I didn’t look bad either
@@SSJDanny where can I see clear shots of the front of the car at bro so I can have my friend get the same done for me
@@SSJDanny I wanna make sure that it looks good to me before I remove the front badge I got a gt86
@@Joewnny oh your car is 17+ model? If it is I have a few pics on my IG @ssjdannyy
@@SSJDanny I got a gt86 2019 and I'm gonna be getting another 2020 or 2021 one but I was jw if removing the toyota badge on the front and the one on the back would look bad without filling it in
could you link the video of how to tune the oft with the pops and bang set up you have? i appreciate it :))
Hello sorry it’s been years since I’ve done that! But I literally searched up what you said and I just watched the most viewed video, sorry!
Sounds meannnn 🔥
Vid don’t do it justice!! 🔥
More power bro! More subscribers and views
Been holding off 😭 Soon 🤝🏽
From Philippines bro support! hahaha JDM NUMBERONE! 🔰
Get a corsa intake adds 20 hp I notice a big diff in low end torque
Badass 🔥🙏🏾
Appreciate you bro 🤝🏽🙏🏽
love the vid, is it raspy when it’s cold?
Mmm not really, with this setup you get a nice deep tone
What side skirts?
ily danny
🫶🏼🙌🏽
Where did you find the Tomei catback or where is the cheapest place to buy new? Also how much does the overpipe change sound wise?
Not too sure if the overpipe made a difference tbh. But since I was already down there changing the front pipe just decided to change it. Traded some coilovers for the tomei lol Brand new is gonna be at least 1.1k minimum
Just got the tomei installed yesterday and i’m planning on going on super lows. What tips or issues have you run into with bags and a tomei. I saw how it sits on the ground while aired out.
The Tomei now has a hole from scraping 😅😂 Getting it welded up real soon! Are you planning on maxing out the coils?
I do hope someone sees this cause I'm also in the same limbo if that makes sense. I don't want a Tomei exhaust just because I don't want it to be super loud, but I do want the pops and bangs (but not this aggressive if that makes sense?) I'm looking into getting the Borla headers with the MAPerformace duel catback 4" stainless exhaust. Does this sound like a good setup to run?
Touch choice. A catback paired with any Header is going to be loud, just be careful which catback you choose because some will make your car sound raspy instead of deep 😬
True true. I watched many videos on different cat backs and for me, the MAPerformance duel cat back sounded the most tame but still had that deep boxer rumble. I don't want it to be SUPER loud like its straight piped. The video I watched is on the MAPerformace yt if you can find it. A guy reviews like 5-10 exhaust. Then I saw the Borla header and thought that it would be a good solid pair for the car
@@SSJDanny
does it pop with no tune? cause if that’s the case imma buy the car rn
Being catless will allow you to have some pops here and there between shifts and downshifts without a tune. But if you want loud pops and on command I’d suggest a tune.
@@SSJDanny it sounds amazing bro
What is it a Spec D? Exhaust
W
Dose it shoot flames
Yes! Lol
Do you think running 60r instead of 80 with the same set up would be a big difference ? All tomei 80 is pretty much out of stock and 60r is the only available where I live right now
Yes biiig difference. Like I mentioned in the vid the 3 inch diameter makes a really big difference. The 60r would probably sound raspy and high pitched
The R series are designed for track racing performance and not necessarily for sound. If you are NA and insist on a Tomei exhaust I would suggest the Tomei Type 60s. It's tuned with NA performance and sound in mind to make it more comfortable and enjoyable for everyday use.
If you use a type 80 while NA not only will you lose torque in the lower RPMs but it will be obnoxiously loud, more so if you are using an exhaust with one or no catalyzers.
Other recommendations are Fujitsubo Authorize, Greddy Comfort Sports, Counterspace Garage's Touring, or HKS.
whatr all the spec on yr car if you dont mind me asking
Talking wheel specs?
Is that the JDM 86 shift knob?
It’s Billetworkz Weighted shift knob. The JDM 86 one is the exact same design as the USDM one just black 🤝🏽
Is it really dronny inside the car?
Hard to say, I’m used to it lol
dude i want my frs to sound like that so bad howwwww
Named all exhaust parts in vid 😬🤝🏽
Do you have any engine mods on it
Not at the moment, been holding off on Force Induction. Just a stage 2 tune
what widebody kit is that?
Rocket bunny v1 👌🏽
@@SSJDanny thank you great build🤩😍
headers?
Borla V2! They get a lot of hate because of the “quality” but I’ve ran them for almost 3 years and a pop tune with no issues
@@SSJDanny hey! Why the Borla’s over the Tomei? Especially given the Tomei everywhere else? Thanks!
@@mresab1997 I think at the time it’s what was in stock. But even after comparing exhausts with others who had a tomei header and the same catback, mine always sounded a bit deeper which I like. Tomei is great! Just never got around to switching because I never had any issues with the Borla V2. But I guess I’m just lucky mine haven’t cracked as most people would say lol
Video doesn’t do it justice! This car is louder in person 😬
Yessir you know this! 🤝🏽
I enjoyed your video, but if you take it to a dyno I can probably guarantee you are losing not only torque but maybe even power. I'm speaking from personal experience. You might gain a few hp up at the very top near 7K, if any at all, but the lack of proper exhaust scavenging and the turbulent airflow is probably costing you power. As much as I like the sound, if you want performance you are better off with stock or a full 2.5 to 2.75 inch exhaust setup. Only use this exhaust if you're FI.
If you want even louder, God help you and everyone else around you, you should just strait pipe the entire exhaust.
Glad you enjoyed it! Thanks for info and advice! 🙏🏽
@@SSJDanny you're welcome. I had OFT before with stage 2+ tune and I made maybe 192 HP with the Greddy Revolution RS, nearly identical to the Tomei Type 80. With a transmission control factor accounting, maybe 168 ± 5hp at the wheels at a hub Dynapak. Granted I don't have access to ethanol but Japanese high octane is 93 to 94 AKI equivalent I believe.
Now that I'm turbocharged I use the Tomei Type 80, but I'm still working out how to keep turbulence down or eliminate it because I'm still using stock front pipe, everything else is HKS turbo manifold and Tomei exhaust parts. My goal is to have the diameter from the Tomei overpipe transition as smoothly as possible to 3 inch if I'm able to, and hopefully that will increase scavenging, reduce what little lag I have, and increase lower end torque. I'd love to help you out if you have any questions in turn. I'm currently using EcuTek and used Delicious Tuning but will change to a local tuner in Japan or use CSG's Zach since DT screwed me.
Chula?
Yupp 🫣
Looking to mod my 86 any recommendations
@@vastolorde2416 tint, coils, wheels, and exhaust 🤝🏽
@@SSJDanny did you do the wide body yourself?