Kriss Vector Trigger Upgrade - Simple and Inexpensive
Вставка
- Опубліковано 3 жов 2024
- This is a simple and low cost trigger modification for the Kriss Vector Gen2. There are further upgrades that can be done, but this is one of the easiest and is fully reversible.
Available here: bit.ly/2Hx2S5t
Contact: flood@farrow.tech
Just did this mod. Night and day difference! Thanks so much for sharing!
Love it! Keep the Vector videos coming! 😊
+Snarky Arts thanks! I got a flashlight mount in the works and one other large project, then I'm out of ideas for this platform.
Just as a quick note, this video shows the Gen 2 pre-2017 version. In later iterations, there is only the pin at the front of the rail to hold it in place. The screw itself can be found at nearly any hardware store and is an M4 (0.7 thread) hex cap. You can get the 20mm long standard size screw, remove about 2 or 3mm of thread (enough to push the trigger bar to remove all pre-travel) by grinding with a bench grinder or other grinding tool, then grind the head of the screw to give clearance to slide the rail back on. Just be sure to keep the threads clean and remove any burrs before installing. Add a little cold blue to the screw and you're all set. Total cost (assuming you don't need to buy tools) is $1.29
.07 as stated in video or 0.7 as stated in your comment? Can you clarify, thx!
@@wildshaman I dont think they MAKE a .07 thread. But even if they did, just buy one some of each. Is a dollar really gonna break the bank?
How to take out rail in 2020 version gen2? I pushed out the pin but rail doesn’t move(((
Thanks
@@Игорь-ш8ф2ь you gonna have to hammer the back end of the rail a little
I got the screws Thursday, shortened one to 14.5mm (give or take a thousandth ;) ) and installed the mod this morning. Works like a charm. The trigger is nice and positive, takeup is almost neglible and reset is firm. Thanks for the info presented here and for sending the screws to me.
You said you used a 14.5? That's a bit of grinding he would of used instead of just using a 15mm or 14
I bought the $15 screw (I got scrod) and before installing it, I found the perfect replacement at the hardware store for near nothing. Threads are perfect and the head is semi-round. It fits well below the rail when installed and it's what I'm using. Works great. $5 shipped to you in the US for the one I paid $15 for if you want it. Just let me know and we both come out OK.
Is it still for sale?
Just ordered the screw, as well as the tailhook adapter. Appreciate it!
My Gen 2 vector has no screw through the top rail just a roll pin and the factory screw was 3mm instead of 2.5 but other than that it was the same procedure. I ended up at 14.5mm in length too for everything to be set good. Thanks for the video, it made a very accurate gun even more accurate.
StuartBoyer how do you remove the rail i took out the pin and tried tapping the rail but its tight as hell
Ill give you 5 dollars for the screw and to size it for me?
@@lancegiannelli7737 i have the same gen 2, i used a qd sling mount and a block of wood and a hammer. grab the gun between your legs with the end of the barel on the ground. i placed mine on a towel, pout the qd sling rail mount at the back of the rail. and placed a piece of 2x4 on top and hit the block of wood with a hammer. getting it back on is a bitch. just grab the rail with a hand towel and shove it on. if you bend the rail you're fucked so go slow
Still works in 2021, thanks!
This is amazing! Can’t wait to try it
The screws are M4 x 0.7 18mm length and low profile head, correct? I thought I heard 0.07 but I want to make sure.
Got mine done on my SDP-e it works good, but beware of RED Loctite on the short screw
Just bought the kit from your link, looking forward to this mod.
Thanks for the vid..
I used a no head screw it works perfect
Hey man thanks for the video.
You're welcome man.
Dude, awesome! Thanks for the tip! I just finished this mod on my brand new Vector! Wish I could give you more than one like on this vid!
The most annoying thing is that stupidly tiny frikken roll pin holding the rail in place. On the Gen 2.1 (2017 version) they did away with the screw at the front, but there's still a hole for it in the polymer where it would go. I wish they'd kept the screw and ditched the roll pin.
Badass vid
just ordered a kit from you
Would this "hack" work with a Binary trigger update??
For clarification, you said 18mm screw in the video, but link to a 16mm screw. Which one is the correct length?
+Snarky Arts 16mm is the better one to start with. I ordered both and forgot which one I actually ended up using. The final length is somewhere around 14.5mm.
Hello. I need one of these screws for my Gen 2. Would you happen to have any for sale? Please let me know. Thank you.
PayPal ready👍
Why yes he does for the piddly price of 15 bucks you can buy a screw that he paid pennies for and bought in bulk.
Seems like there was some mention of the part# for mcmaster, I got a thing for color differentiation so I went stainless; Part# 92855A416
Did you have to shorten the screw as said in the video or in your experience was it good to go on arrival?
@@sneak36 Yea, had to cut it down MM'ish (emphasis on the ish, since I have no calipers or mic's to measure it with) to get that nice snappy feeling in the safety else otherwise its too tight, the safety moves into a position 1/2 way between safe & fire, and theres no movement in the safety
@@utoobrandomness7197 thank you
this is great. what the screw actually pushing down on?
Do you need to take everything apart. Or can you just take the rail off.
To an just take the rail off
Is there a way to tighten the safety/selector? Its a little too loose for.my liking
I have a gen two and the hammer wont lock back resulting in the gun not dry firing or firing a round for that matter any help would be appreciated thanks!
Awesomeeee
Do you have to grind down the mcmaster screw that hes saying you could buy?
Thanks for the great tip. Do you have any modified screw for sale?
+1911JMB45 yes, email me at flood@farrow.tech
Any chance you could just send me a modified screw? Dont really have anything to grind it with.
Did anyone here buy a pack of screws and are you willing to part with some?
I have some left, flood@farrow.tech
Nice
Wow!
Hey, I realise this video is pretty old, but I have some questions I'd like to ask you. Is there a way of contacting you outside of youtube?
Email me Flood@farrow.tech
Can I still buy the screw off you?
Do you happen to have any of those screws still on hand?
ADAM DELIA I need one too. Have you found any?
Will this help with the safety? Mine has a bit of a drag.
Mine's still mushy after doing the modification, so I didn't pick up any change, but the trigger is amazing now.
Какой калибр-то?
can you make a video on removing the top rail?
he tells you how literally less than a minute in.
@@killervztwogaming5796 on the newest model, the top screw he talks about is missing.
@@salcidojosiah A. im not sure thats true since mine has it and its the newee 6.5" model.
B. his comment was from almost 3 years ago.
@@killervztwogaming5796 mine is the 6.5 model too and it dosnt have the screw.
@@salcidojosiah maybe a rolling change then or a difference between calibers and/or rifle vs pistol config.
I wonder if this will work with a double tap trigger
Worth a try
Did you ever get this to work with the Double tap trigger? Just ordered mine yesterday and thinking about trying the screw trick.
@@Kicken74 sure does, as a matter of fact I 100% recommend it.
it will not.... and i lost the original screw lol
@@Kicken74 it does not work with my double tap
What did you use to get the roll pin out? It is so small. The metal allen i tried using just bent.
I have a watch tool kit I got for $15 off of Amazon that has punches and a hammer for sizing watch bands
would you sell a screw please
Would it be possible for you to make me a custom part for a AirRifle???
+DrJones sure send me an email flood@farrow.tech
Can i buy a screw off of u for both of my vectors ?
Yes, check farrow.tech
Very cool
Same principle as the Joe Bobs trigger screw adjuster that I installed on my AR-15.
Shortens up the pull in the trigger for not much money at all.
Are there springs inside that could be replaced for an even lighter trigger throw? Or possibly do a .25 cent trigger polish job to smooth up the feel of the trigger?
Does this work on the Post Feb Gen 2's the ones without the hinge?
This a copy of an e-mail to GuyinGarage: Hi,
This is a followup to a message sent yesterday.
I solved my problem and found the metric bolt needed do your fantastic trigger job on
the Kriss Vector. I am finished and it works just like you showed on UA-cam.
I made a few changes:
1) I found and used a m4 by 18 bolt (m3 to small)
2) The bolt had a standard head height but I filed it down to fit as I did with the extra
length.
My 45 Vector is called a Gen 2 2017 or Gen 2.5 or Gen 2-B. The main difference is not
having the two pivoting points for a folding stock and the bolt you used is now a m4
instead of the m3.
I ordered yesterday an adapter from Primary Arms which will screw into the threaded
rear of my pistol. It will allow me to attach my forearm brace making it a folder. It
only folds to the port (left) side of the gun but it folds & that's what I wanted.
Next will be to buy one of the double tap rigs. If your upgraded trigger interferes with
the double tap trigger, will please let me know.
I can always hold off on the double tap and go forward with my last addition which is a
fully licensed suppressor.
Great trigger upgrade. Congratulations, you must be a master gunsmith.
Highest Regards
Is the kit still available?
Yes, you can get one here: bit.ly/2M0hV61
Guy in a garage awesome! I had one in the shopping cart, just was waiting for confirmation! But I ordered a set! Super stoked on it!
Guy in a garage ordered one a few days ago, just wondering when you’ll be shipping them or if I’ll get a confirmation or not.
Возможность случайного срыва курка повышается.
Does the semi auto have the same internals as the full auto?
Depends. Did you get the fully semi auto one?
Haha. But seriously, is the bolt, carrier, etc the same?
@@hydro.tactical3843 Bolt and carrier yes. Trigger group no. Someone sells a "double tap" for it but its double tap or safe only. No single shot. Once you pull the trigger you have to release fire it. Hopefully Frankling Armoury will make a BFS for the Vector.
@ :43 what'd you call me?
Shit can you just send me a screw already trimmed down and I give you my money? I'd pay for this!! I'm sure many people would!!
+samuel morgan send me an email flood@farrow.tech
I’m interested as well, still have any to trim down? And how much?
Wow Ty do u know anything about the double tap triggers
The Double Tap Trigger works awesome I have it in my Vector plus I do this lil trick with the trigger and it shoots perfect.