AMANA PTAC TEARDOWN 2010+ / HOW TO REPLACE PTAC FAN MOTOR
Вставка
- Опубліковано 12 вер 2024
- FOR PTACS WITH ONE MOTOR AND 2 FANS, MOSTLY 2009 AND OLDER CHECK OUT THE VIDEO LINK BELOW..
• AMANA PTAC REPAIR 2009...
AMANA PTAC TEAR DOWN VIDEO..
HOW TO REPLACE PTAC FAN MOTOR..
HOW TO REPLACE PTAC HEATER..
HOW TO FIX LOUD PTAC..
HOW TO REDUCE COMPLAINTS WITH PTAC..
WHY IS MY PTAC SO LOAD?
HOW TO REMOVE PTAC FAN..
HOW TO REBUILD/ REFURBISH A PTAC
HOW TO MAKE PTAC LOOK AND RUN LIKE NEW..
HOW TO REPLACE PTAC BLOWER..
HOW TO REPAIR A PACKAGED TERMINAL AIR CONDITIONER..
HOTEL AC REPAIR..
PTAC NO HEAT..
PTAC WONT HEAT UP..
PTAC WONT BLOW..
PTAC BLOWS TOO LOUD..
My guy, absolute lifesaver. I switched from commerical/ light residential HVAC to working on ptacs for an apartment xompex and mayne..youve saved me screws and time
You actually showed how to do it and didn't skip scenes. Thank you.
Thanks for watching, glad I could help..
was very good demonstration
@@alanbrunson1263 thanks
Explained good. But I feel due to a few steps in between which you didn't show was how did you get to take that roller fan out?
You need to remove the entire assembly from the top first, to do this there are around 10 screws around the top edge holding the top plate in place..
Remove the entire top plate..
then there is one Allen screw on the fan holding the fan to the shaft, loosen that screw enough so that the fan will slide around on the shaft of the motor, then you remove the 3 screws from the bracket that is holding the motor in place, and remove the motor..
Can you please make some more videos . Specially on diagnostic.
Yes.. what kind of problems are you having and I will make a video to cover those specifically..
Does it have to be the same kind of blower motor? Is it possible to just swap one from another Amana PTAC Unit that's a different Model?
It depends on the motor..
If it will mount up and plug into the same board then it should work, but then if it did it would probably have the same part number..
This same fan motor is used in a few different models tho so it definitely could be interchangeable..
If your Ptac is an older model than this one, then the fan motor is completely different.. I have a video for those also..
Where do you order your fan motors from?
We usually order them straight from Amana, but someone recently told me about PTAC4LESS, I think they are the cheapest and they usually have them in stock.. That's where we will probably order them from now on.. I have supplied a link to the website below..
bit.ly/31iqIgU
The part number for this specific motor is: 0131P00029SP
@@williamblanks8500 got one through Ptac.
Thanks for watching.. If this helps you at all please like and subscribe!!!
Your video got it installed with no trouble. 2.5 mm allen for fan blade.
@@jordihester6286 I'm glad the video helped you out.. If you have any more PTAC questions feel free to ask..
I've already done that. Keep it up bro
They are called temp sensors
They are temp sensors, but according to the manual they are called thermistors.. There are 4 for this type of PTAC..