How to Double Flare a Brake Pipe // DIY
Вставка
- Опубліковано 9 гру 2022
- How To Double Flare a Brake Pipe EASY DIY! Including how to use a double flare tool. In JUST 7 mins you will learn how to DIY double flare a brake pipe (also known as bubble flare a brake line) using a flaring tool, so you can get on with your brake pipe repair and SAVE some money!
💥 Please consider SUBSCRIBING for MORE Great Car DIY Content!: 👉 ua-cam.com/users/ReviveMyRid...
🙏 If it HELPED You, I would be very grateful if you SHARE this How To Double Flare a Brake Pipe DIY video! The LINK is HERE: 👉 • How to Double Flare a ...
🙌 Any Questions or Comments: Please ASK and I’ll try to help if I can
In this video, I use Cupro Nickel (Kunifer) brake line because it is more corrosion resistant. I use a mini brake pipe cutter because the more compact ones can fit into small places when working on the car, rather than just on the bench. I use a hand help double flare tool, again, because it can more easily be used on the car if needs be (compared to one that fits in a vice) and it is cable of doing a single flare and a double flare on a brake pipe.
Once you learn how to double flare a brake pipe, you can pretty carry out any brake pipe repair. It can be time consuming and that’s why DIY brake pipe repair is such a money saver!
- SUPPORT -
If you like my work and want to help to support this channel you can use the link below and buy me a coffee. Thanks!
www.buymeacoffee.com/ReviveMy...
Or maybe give me a THUMBS UP! 👍 👍 👍
🔧 TOOLS & MATERIALS 🔨
Single & Double Flare Tool
🔗 UK Link: amzn.to/3ORvc2p
🔗 USA Link: amzn.to/3VkdTcO
3/16” Cupro Nickel (Kunifer) Brake Line / Brake Pipe (More corrosion resistant than normal Copper)
🔗 UK Link: amzn.to/3Fgy4Tw
🔗 USA Link: amzn.to/3XNa69y
Brake Line fittings - These should allow you to join in a new section and put a new nut / fitting onto a flexible or a brake caliper
🔗 UK link: amzn.to/3iwjpuB
🔗 USA link: amzn.to/3iujCOM
Mini Tube Cutter - In this case, small IS better! Just in case you have to use it in situ on the car.
🔗 UK link: amzn.to/3iwjDBX
🔗 USA link: amzn.to/3H7mLOV
Brake Fluid Dot 4 for Topping Up (check that is what your car needs but most modern cars do!)
🔗 UK link: amzn.to/3GYDSlT
🔗 USA link: amzn.to/3UoOPjq
🎵 Rest Easy by Vans in Japan (UA-cam Audio Library)
Affiliate links: This video and description contains affiliate links, which means that if you click on one of the product links, I may receive a small commission. I always try to link to parts and tools with the same criteria as I would if buying for myself, which is usually a balance of price, quality cost etc. In most cases (but not always, due to changing availability over time) the tools, parts etc are the exact ones that I used in the video.
DISCLAIMER - Please note that this video and its content is intended for information purposes only. Although every effort is made to ensure that all the information is correct, there is no guarantee that this is the case. This video should not be considered a substitute for seeking independent advice or the services of a professional. Any work that you carry out on your vehicle or vehicles in your care are at your own risk.
#brakepipe #brakeline - Авто та транспорт
Just as a reminder. Put the correct fitting on the pipe before flaring.
Absolutely! You’ll be cursing if you forget! (Been there….) 👍
This is a great video... thank You.... I just got my flaring tool last week... haven't used it yet.... you did a great job going through step by step... much appreciated... Thank You!
Thanks a lot! I made the video because initially, I wasn't getting very good double flare results. Once I got it all worked out, step by step, I thought it was a good topic for a video guide! 👍
Cheers fella, exactly the info I needed!
Thanks! Great to hear 😊👍
Just got this type of flaring tool , with no Instructions included, so very helpful video, , you should do a bubble flare one too
Thanks! Good idea, given the popularity of this video, it would probably do well! cheers, Phil
Perfect set of instructions. Bought the exact kit and now feel confident to start. Thanks!
Thanks! Yes, it’s a good little tool, I’ve used it quite a few times now, so you should be good to go! 👍
You don't need to risk damaging the end of the brake pipe with the stop if you fit the stop first while the two 10 mm bolts are still slack enough for the pipe to be gently pushed up against the stop.
Thanks, yes, that's a good alternative method but I was following the instructions as per the flaring tool. Cheers, Phil
Thanks, just what I needed.
Great! 👍
I had to replace a section of 1/4" 409 stainless on my '80 Chevy 3/4 ton truck that was damaged by a "professional" mechanic. The 1/4" version of this tool was the only one that would flare the 409 stainless on my truck (inside the frame).
Interesting to know and thanks for sharing. I knew the tool cool flare mild steel but stainless is much harder, good to know that it works with it! It's a great little tool isn't it! 👍
That punch grease is brake rubber grease for assembling hydraulic cylinders
Very well made video! Thanks for sharing!
You’re welcome, thanks for the comment! 👍
Got one of these flaring tools. They don't chew the pipe up unlike the cheap clamp type tools. Very easy to set up and operate. Produces perfect flares.
@BRADSWAND Yeah, they're really great aren't they! I tried a few and when I came across this one, I was like yeah, that's the one to have! Hence, I wanted to do a video and share. 👍😀
I had one of the clamp style flaring tools. Did a job and 1/2 the flares leaked. Threw that tool in the trash and bought one of these newer style flaring tools for the win.
Great video and thanks for sharing with us this
Thank you! No probs at all, glad you liked the video!
Top man,perfect video👏👏👏👏
Thanks so much!
Nice job! Thank you for the video 👍
No probs! Cheers 👍😁
Absolutely clear instructions and excellent video. Well done.
Thanks very much for the kind comment, much appreciated! 👍😎
Great video mate thanks
Thanks!
Hi. Excellent video!! Thinking of getting one of these. Can you tell me what the difference is between a single and double flare. And how to know which one to use? Thanks
Hard to explain, single flare is like the end of a trumpet, just 1 funnel type shape. Double flare is like a donut shape that is formed in the pipe. Almost all, brake pipe flaring joints your find on a car will be double flare. Buy the tool, it’s brilliant and will save you the cost many times over. Can also flare steel pipe. Cheers, Phil
You must have a double flare for high pressure(brake lines)
You are THE Man!! Thank you very much for the demo and instructions. Exactly what I was looking for. Very helpful. I liked and subscribed. I am looking forward to more of your videos, but right now I gotta get back out to my corroded old dodge dakota and splice in new brake lines. Not a good feeling when you step on your brake pedal and it goes to the floor...
Thanks again... 2 thumbs up!!!
Hey, thanks very much! Good to have another car diy’er as a subscriber. No brakes situation sounds scary 😦 Hope you get the truck sorted 👍 cheers, Phil
Awesome
Thanks! 😀
wish I watched this before eating all the grease...
but seriously - good video and thanks for confirming you used Kunifer in this tool, the other cheaper tools just can't form this, only softer copper
😂
@@theskysfallingin thanks! Yes, I was keen to get a tool that could form the Kunifer too 👍
@Revive My Ride mine just came from amazon this morning, perfect flare first time on the kunifer pipe I bought, many thanks again 👍
@@davidwort37 Perfect! 👍 Thanks for the update, glad it worked well for you! 😀
Thanks for the video, I need to do this while the pipe is on the car so will be a bit more fiddly, how do I attach the screws that go into the ABS pump?
Hi @alfashowroom sometimes I reuse the fittings. So I would detach the pipe from the ABS pump, see how the end of the brake type is formed (probably a double flare). If so, then cut the end off of the pipe and retain the fitting to use again. Hope that helps! Cheers, Phil
ASK - one of my favourite motor factors and Mens "Toy Shops" used them since i was about 15!!
You must be a local then! (around the Kippax area)! Yes, agree, it's a great motor factors, really good customer service! 👍😀
Thank you very much I just ordered. To be arriving today and your video help immensely
@jameslarson4824 Glad the video helped! 👍
Just got a similar tool. When I clamp the pipe tight enough to hold it secure for the punch, I find that the pipe is badly marked. It ends up with seam marks down each side where the two clamp pieces meet. Not sure if its acceptable to file or sand these down or if the tool I have is for the bin.
Just a thought…. I believe there are two tools depending on what size brake pipe you are working with. Mine is a 3/16 tool and that is the sized pipe I use it with. If you are using a small tool on the larger pipe, which was 1/4 maybe that is the issue? I think the larger size is only in older vehicles though, so a long shot, might be worth measuring though! I wouldn’t file down the outside of the pipe, risk of weakening the pipe. Failing that, yeah, I would think about changing the tool. Cheers, Phil
It's definitely 3/16. I found that the edges on the clamp where the pipe go through were very sharp. I took a round file to it to smooth it off and that resolved the pipe crimping issue. Unfortunately, the quality of the flare is not acceptable as it is slightly deformed. Determined to succeed, I've ordered a more expensive, higher quality version of the tool. Should arrive next week. Buy cheap, buy twice certainly held true here.....
New Laser flare tool arrived. It's the double head one that supports SAE and DIN flares. What a difference....first test flare was perfect and the tool feels much more robust. Seemed to take much less effort to press the flare too.
I got this exact tool based on this video. It does indeed make very nice flares on the copper nickel stuff, however on steel pipe it doesn't clamp tight enough to keep the pipe in position due to the extra force required. This makes it not so useful for on car repairs when repairing OE steel pipe. Any tips on flaring steel pipe?
Hi @pugboat Not sure what is going wrong for you but I have used the tool successfully on steel pipes quite a few times. As you say, to join a new length of brake line to existing steel brake lines on the car. I just have the following tips which may help: If your brake lines have paint or any other type of coating on them, you have to trim it right back, ideally using some fine wet and dry sandpaper. Then get the exterior of the pipe, where the clamp is going to operate as clean and dry as possible, I use brake cleaner and then wipe it down. Clean the inside of the clamp too in the same way. Any liquid, grease etc in these areas will allow the clamp to slide. I'm sure you are doing this anyway but ensure you tighten up the clamp bolts evenly, half a turn on one, half a turn on the other. Repeat until it is tight and use a ring spanner or socket to get it REALLY tight. After that, it is the normal flaring process. I hope this helps you some! Thanks, Phil
Where can I buy the flareing tool please.
Hi Kevin, you can find them on Amazon. There are a couple of links in the video description which should help 👍 cheers, Phil
that grease looks yummy tho
Doesn’t it! 🤤
Great Video on how to make the Double Flare.
I have the same tool, except mine is the Lisle brand part# 33260, might have purchased it off Amazon. Does the 3/16" and the 1/4" tubing. Also bought 25 feet of 3/16" Nickle/Copper Brake line.
Saw one Video where the guy used Copper line which is not to be used for Brake lines.
He said he is located in the UK, and is legal to use there.??? Don`t think so.
These nifty little tools are all made in China from what I see.
Charlie
Hi Charlie, I think normal copper is still legal and people use it on their classic cars in the UK but best practice is definitely Copper/Nickel now. Agree, I see a lot of the exact tools with all sorts of different branding on them but they do seem to be well made. Cheers, Phil
@@ReviveMyRide I used the Lisle tool first time yesterday afternoon. First double Fare, and came out perfect. Now if I can replicate the 2 lines from the MC down to the proportioning Valve on the Frame, and copy Ford`s zigzaggy bends and make it all line up.
Charlie
@@user-my8wf6ph5h Well done getting the double flare right first time, must confess, it took me a few tries! Yes, there's hours of fun to be had shaping the brake line and starting again if you kink the pipe! 😂
These don't work on steel lines.i bought the same tool .
Hi @rustdawg7364 Thanks for the comment but it worked for me! See this video for visual evidence, I flare the existing steel pipe on the car, so that I can use a straight connector to join in a new section of brake pipe. ua-cam.com/video/Qn5DtuE7EJA/v-deo.html Thanks, Phil
That simple tool is accurate and contained/ that split wing nut tool is no good because the dies DON t have a right size steam and cannot center properly / that has been out there over 50 years ! Eye believe that it's intentional somehow the industry don't want diy to fix there own stuff.
good video my flare tool you have to guess how far the pipe needs to go in the tool
@petersomthing9508 Yeah, it is definitely convenient. I would really struggle without this feature! but with a bit of experimentation I suppose you could work out the correct length, let's say it is 8mm, once you know this for sure, you could start marking the distance on your pipe before inserting it into the tool. Cheers, Phil