Easy way to remember roughly what each of the macro nutrients do is NPK = Up, Down, All around. Nitrogen mostly benefits above ground vegetative growth, phosphorus benefits roots below ground, and potassium helps all around the plant including flowers and fruits.
Sorry to be that guy but If rinsing the syringe to avoid cross contamination. Use a fresh water supply for rinsing ...not the water and Nutrients Otherwise it kinda negates the point of rinsing it, Check 2.48 you'll see you squirting grow freshly contaminated with the micro water mix back into the grow bottle to correct amount in the syringe. Then contaminating bloom with both micro and grow water .
@@dominickmitchell9886 good question! Typically for the first few nodes I use 2ml/l. Then after I either go straight to 4ml/l or use 3ml if I suspect they will burn (I have never had these nutrients burn)
Micro, grow then bloom in that order. There's a reason they tell you to mix in that order. I've seen folks jus use 1 or the other and have issues. And they wonder why🤷😂
@@cameronjohnson2815 it's a mix of chelated nutrients, so you will always have to use all 3 parts. If you don't use all 3, it could mean that some nutrients are unavailable. It's a balanced feed, so good for veg growth & bloom. I've had no issues with chillies using all 3 parts, which have been known to be sensitive to too much N in the bloom phase
I don't understand, if my plants are not yet in the flowering phase, should I still mix all 3 together? should you always mix all 3 in the same order, no matter what phase the plants are in?
Hey, you sure can, but I would check Ppm afterwards to make sure you're not adding too much. The pH perfect trio is a pretty comprehensive blend by itself
So google is useless. I searched specifically to find out what would happen if I just used part A one time because some how I bought 2 part A bottles instead of 1 A and 1 B but it doesn't show me anything close to what I searched. Is there anyone that can tell me what would happen? It's only for a week until I get part B.
It's a two part nutrient, specifically made for mixing both of the two parts together. You run the risk of the pH not being stabilised, and some chelates may drop out of solution. That said... It probably won't be that devastating, for just a week.
I used them the wrong way round and my plants burst into flames. Burned my house to the ground. it was nothing to do with the grow lights I rescued from the trash that sparked all the time. They were totally safe.
@@suntukan5704 I always use 4ml of each part for seedlings and young plants, and then when they reach maturity, I use 8ml of each part (in 2l of water) + 2ml calmag
Thanks for your comment. I have noticed, at least when growing peppers, starting at 2ml/l can help very young seedlings. However, nowadays, I prefer to just mix up 4ml/l and dilute roughly 50% with tap water. Effectively they are the same concentration but it makes it easier for me while I have more mature plants and seedlings at the same time. It is very difficult to give plants nutrient burn with these nutrients, I have noticed.
What are you growing cause if it's cannabis then that doesn't make much sense to me that's far too much potassium cause micro is just pure potassium and nothing else. No I know that calcium is really good catalyst for growing cannabis especially as they're young but if you read the ratios they start to step up and then in the flowering state there's almost none so it's my first time using these fertilizers and I thought I had everything on point my plants were doing perfect and then I ended up stepping it up to just using grow from micro and it killed them and my measurements were on point they weren't overwatered and they got plenty of light ventilation and the correct amount of humidity so something went wrong there I was able to save one of the plants but the other ones no good please if anybody knows anything about cannabis they're able to just respond to this message and they're knowledged on this specific product that would be awesome cuz I'm trying to find stuff on the internet and I downloaded the PDF from this company but it all looks like another language to me and it's time for me to give my new plants nutrients and I've been referring because I don't want to lose these ones.
@@wescoupland3985 hey, thanks for commenting. I don't know specifically about cannabis but I do know that according to the manufacturer's instructions you should be using an equal ratio of all 3 parts at all stages of plant growth. For the seedling stage, it should be: 2ml micro, 2ml grow, 2ml bloom in 1l of water. Once they reach flowering, it should be 4ml of each. If you try and use each part separately, your plants will die. The 3 parts contain chelated nutrients which, when mixed together with water, will buffer to a slightly acidic pH and make the nutrients available to your plants. Hope that helps.
or you can save using PH perfect until your plants start to bloom!. most soils have 3 months worth of nutrients in them, and don't need plant food until the start of blooming!.
Easy way to remember roughly what each of the macro nutrients do is NPK = Up, Down, All around. Nitrogen mostly benefits above ground vegetative growth, phosphorus benefits roots below ground, and potassium helps all around the plant including flowers and fruits.
I'll add that to the knowledge bank. Thanks for the info Baus!
absolute proffessional, cheers :D
I like the way you addressed the error - it was pretty funny - thank you for the video!
Thanks for watching!
Sorry to be that guy but
If rinsing the syringe to avoid cross contamination.
Use a fresh water supply for rinsing ...not the water and Nutrients
Otherwise it kinda negates the point of rinsing it,
Check 2.48 you'll see you squirting grow freshly contaminated with the micro water mix back into the grow bottle to correct amount in the syringe. Then contaminating bloom with both micro and grow water .
Other than that , we'll put together video , nicely explained.
Thanks, and I do agree, it can definitely be beneficial to avoid cross contamination.
Nice clear nutes! Looks good 👍
Thanks! I've already noticed a difference in the quality of my roots!
Am I supposed to use these nutrients for all three cycles, I’m just confused bc I don’t see a feeding schedule for the seedling stage?
@@dominickmitchell9886 good question! Typically for the first few nodes I use 2ml/l. Then after I either go straight to 4ml/l or use 3ml if I suspect they will burn (I have never had these nutrients burn)
Good job bro. Keep doing this videos. 👌
Thanks man! There's a new one coming up very shortly!
Did you start with tap or filtered water before adding the nutrients?
Filtered or tap will both come out the same pH. I did test this. Of course tap water has the benefits of extra calcium and magnesium
Nice
Micro, grow then bloom in that order. There's a reason they tell you to mix in that order. I've seen folks jus use 1 or the other and have issues. And they wonder why🤷😂
my water is hard 15dh should i distill it before mixing or it makes no difference?
@@xzkutor4939 my water is about the same, it shouldn't make a difference :) very hard water area here
THX,
I thought this stuff was specifically made for the devils cabbage.
It may well be, but it works well for peppers too!
Many plants are in same family. Anything that works for tomato's will grow ganja and vice versa.
So if I'm using grow bloom and micro in a 2 liter bottle how many ml of each one should I put help
4ml of each would be a half dose for seedlings. 8ml of each would be a full dose for fully grown plants. Hope that helps
Do you always have to use grow? Could you do 4ml of micro and 4 ml of bloom? During flower? Or just micro and grow during vegatative growth?
@@cameronjohnson2815 it's a mix of chelated nutrients, so you will always have to use all 3 parts. If you don't use all 3, it could mean that some nutrients are unavailable. It's a balanced feed, so good for veg growth & bloom. I've had no issues with chillies using all 3 parts, which have been known to be sensitive to too much N in the bloom phase
I don't understand, if my plants are not yet in the flowering phase, should I still mix all 3 together?
should you always mix all 3 in the same order, no matter what phase the plants are in?
mix all 3 all the time. As the plants flower you just make the concentration stronger. Thats how I understand it.
@@alexsenst4912
@@georgehetfield1143how it turn out bro?
@@DonMontega
Unfortunately I can't tell you yet, but I'll see it soon, then I'll get in touch. ;D
@@georgehetfield1143How'd it go
hi, can i mix the Advanced Nutrients ph set with other Advanced Nutrients ?
Hey, you sure can, but I would check Ppm afterwards to make sure you're not adding too much. The pH perfect trio is a pretty comprehensive blend by itself
ok ty :)@@isotopechillies
How you filming this in the uk on UA-cam and getting away with it. I need answers
What do you mean getting away with it?
@@isotopechillies until l clicked on your page I thought you was growing other herbs
Why would it be a problem?
So google is useless. I searched specifically to find out what would happen if I just used part A one time because some how I bought 2 part A bottles instead of 1 A and 1 B but it doesn't show me anything close to what I searched. Is there anyone that can tell me what would happen? It's only for a week until I get part B.
It's a two part nutrient, specifically made for mixing both of the two parts together. You run the risk of the pH not being stabilised, and some chelates may drop out of solution.
That said... It probably won't be that devastating, for just a week.
@isotopechillies yea i figured it just wouldn't do anything. Only used it coz I'd already put it in the bottle and didn't wanna waste it haha
is that a 1L ? of bottle?
2l bottles, thanks for watching :)
Just got these. All 3 bottles show a different order to add the ingredients 😅 so I guess pick whatever order you want
All three say the same, you just have to read it in the right place on the bottle. It will always be micro, grow, and bloom in that order.
They all say the same process.
I used them the wrong way round and my plants burst into flames. Burned my house to the ground. it was nothing to do with the grow lights I rescued from the trash that sparked all the time. They were totally safe.
@@uv77mc85 a little sparkin' is just a free show.
Mixing equal parts will end in nitrogen toxicity going into bloom. Emerald Harvest 3 part feeding chart works great with these nutrients
5:08 Wenn du deine Pflanzen liebst dann nim einen schluck!
How often should I give nutrients
Every time the plant drinks up the nutrients you gave it.
@@isotopechillies even when I’m 4 weeks in
In 1L 2ml of micro,2ml of grow,2ml of Bloom? Or in 3L?
4ml micro, grow, bloom in 2l of water :)
@@nervousisotope5480 1.25ml micro,grow, Bloom =4ml
Or i need to put
4ml micro,grow,bloom= 12ml?
@@suntukan5704 I always use 4ml of each part for seedlings and young plants, and then when they reach maturity, I use 8ml of each part (in 2l of water) + 2ml calmag
@@nervousisotope5480 okok thank you very mutch!! Sorry for my english,i dont speak very well 😅
Way too much go 1 ml per 2 liter and work your way up get a ppm meter and ph meter.
Thanks for your comment. I have noticed, at least when growing peppers, starting at 2ml/l can help very young seedlings.
However, nowadays, I prefer to just mix up 4ml/l and dilute roughly 50% with tap water. Effectively they are the same concentration but it makes it easier for me while I have more mature plants and seedlings at the same time.
It is very difficult to give plants nutrient burn with these nutrients, I have noticed.
Good accent for a legitimate grow hahaah
I eagerly await a visit so I can tell the coppers all about me chillies
@@isotopechillies it's good to know you can mix it one go....how did your chilies turn out? Was it extra spicy?
Oh yeah! They turned out great. I'm still using the same bottles of nutrients, they give a lot. Big indoor grow on at the moment
What are you growing cause if it's cannabis then that doesn't make much sense to me that's far too much potassium cause micro is just pure potassium and nothing else. No I know that calcium is really good catalyst for growing cannabis especially as they're young but if you read the ratios they start to step up and then in the flowering state there's almost none so it's my first time using these fertilizers and I thought I had everything on point my plants were doing perfect and then I ended up stepping it up to just using grow from micro and it killed them and my measurements were on point they weren't overwatered and they got plenty of light ventilation and the correct amount of humidity so something went wrong there I was able to save one of the plants but the other ones no good please if anybody knows anything about cannabis they're able to just respond to this message and they're knowledged on this specific product that would be awesome cuz I'm trying to find stuff on the internet and I downloaded the PDF from this company but it all looks like another language to me and it's time for me to give my new plants nutrients and I've been referring because I don't want to lose these ones.
@@wescoupland3985 hey, thanks for commenting. I don't know specifically about cannabis but I do know that according to the manufacturer's instructions you should be using an equal ratio of all 3 parts at all stages of plant growth. For the seedling stage, it should be: 2ml micro, 2ml grow, 2ml bloom in 1l of water. Once they reach flowering, it should be 4ml of each.
If you try and use each part separately, your plants will die. The 3 parts contain chelated nutrients which, when mixed together with water, will buffer to a slightly acidic pH and make the nutrients available to your plants. Hope that helps.
Are you recording this with a coconut? The sound is terrible. And the constant camera movement makes it hard to watch. Good content though.
Nah u Just deaf and blind
Thanks for the feedback. I have since improved my setup
Bo bo junk don't buy
or you can save using PH perfect until your plants start to bloom!. most soils have 3 months worth of nutrients in them, and don't need plant food until the start of blooming!.
mix them wrong and they explode, just kidding!