How to remotely switch the dust collector on and off
Вставка
- Опубліковано 16 сер 2020
- I made a switch to remotely operate a dust collector made by Makita using a cheap remote control relay from China.
You can make it wireless with a very simple modification
This is the remote control used in the video.
amzn.to/34cMwtH
Makita dust collector
amzn.to/2EcGhe5 - Навчання та стиль
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
Очень нравятся, ваши работы в области деревянного станкостроения!
You always do good work.
Buenísimo proyecto, muy funcional, gracia por compartirlo...
Saludos desde Argentina 🙋🇦🇷
Remote operation of the dust collector helps improve work efficiency.
The tools is good, nice hands but the idea and execution are below the level of the master.
There are at least 3 ways to make it easier and more beautiful.
In the case of using this remote control, the wires could be soldered inside without making external connections.
The second option is to use a slightly different scheme, the board is connected to the grid, an on-off pulse from the remote control, and cleaner just connected to an electrical socket.
And the third, the most reliable, is to make a switch on the cleaner hose, and do everything with one hand and do not look for the remote control every time. I have a 10 m vacuum cleaner hose, inside a wire and a button at the end of the hose.
Really, really interesting project! 😃
Stay safe there with your family! 🖖😊
Hi JSK-Koubou, an idea to the next video (maybe the 2.0 of this version)
You could wrap a wire around one of your AC lines several times, making a simple transformer. Place a diode at one end of the coil wire to convert to DC, and then a capacitor in parallel (or a filter circuit) to give a steady signal. Then (maybe need a transistor as a relay) but after that you can connect the remote controller, and now you have the remote controller automatic when the drill turns on.
If you do that on the wire (centralize the power source) that power all your workshop machines, now you covered all of them with an automatic dust collector. Just need to drive a
vacuum dust pipe to each place.
Regards.
simple and clever!
掃除機のように手元にスイッチがあると便利ですね!
ワイヤレスなのでホースの延長などで交換したときや、据え置きでの使用にも便利そう。
Thanks for sharing that
Hi koubou, i think it could be better to instal (AC-DC 110V 220V 230V to 12V Converter Isolated Switching Power Supply Board) as an inside power of this relay. And then you have still a free access point for external tools. Greetings
Good inspiration
I bought a remote control for lights off Amazon, it came with 3 outlets and a single remote. It runs my shop vac and Delta dust collector with ease.
Tom Griffin Link?
@@deploracon4740 This is what I bought, but it is unavailable now.
smile.amazon.com/gp/product/B07K2XRJW6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
When you watch his tutorials you can always hear boss music!
hi, man.the idea is good,but in my opinion for this modification, I would place a step-down adapter inside the case.This frees the control socket.And as an option multiplied key rings for further modifications of machines
GRACIAS POR EL VÍDEO Y APORTE, SALUDOS......
Спасибо Вам!
An even more satisfying and sleek conversion would be to install the dc supply inside the dust collector case and internally wore the AC mains to it from the back side of the AC socket on the machine. That way, it’s all internal to the dust collector.
100Vも集塵機の中から取ればスッキリですね!是非試してみてください!
I thought it was great! I just didn't understand one point, why didn't you leave the power supply inside the device connected directly?
メーカーの禁止事項の分解 改造行為なので
保証適用外ですが、とても利便性の上がる改造ですね。
アダプターもケースを分解して内部でAC100Vを確保できれば
完全に内蔵できますね。
これは便利そうで素晴らしいですね!
素人の素朴な疑問なんですが、受信機の電源ケーブルを
内部で集塵機の電源ケーブルに割り込ませちゃいけないもんなんですか?
More tgan enough space inside to take the 120v for the remote supply, why use up the socket?
His vacuum is so quiet 😌
Nice work but way easier to just buy a remote plug-in adapter. Cheap and efficient. I have them for all my powertool vacuums and air compressors.
Лайк, та переглядів, вашому каналу.
マキタのこれより旧型を利用していますが、同様のフットスイッチのみで有線遠隔ON/OFFできています。このような改造は怖いので買い換え時注意ですね。
Maximum load on Amazon description: 1A (there is a better load below 700ma)
I think that the dust collector has a large current (11A in Makita's catalog), but is it okay?
The load on the switching circuit is a lot less than what the motor draws.
There is only one thing left to do : attach the remote to the vacuum handle, so you can use it with one hand !
That's interesting video. I'm looking for similar solution for Makita 2×18V dust extractor.
I know I could get a AWS dust extractor but not all Makita tolls have a AWS port.
Hello, important article. I was interested in the pedestal drill seen in the video, can I get the plans?
Check his earlier videos, for where he builds the drill press. There should be a link to the plans in the video description.
You could have connected the 5v dc adapter to extension socket, but on the inside. Just splice the wires leading to the socket.
I thought the same thing. Dissasemlbe it again and hide that power supply inside. :)
感心して見ております。 スイッチ並列の箇所には負荷は かかっていないのでしょうか? 負荷がかかっていれば、リモコンリレー壊れますよね?
I would have tapped into the power outlet from inside the vacuum and put ALL the remote connection inside. It looks hollow enough you could secure the adapter inside someplace.
Do they sell this vacuum (110v) in the US?
Please ask Makita for details.
However, most Japanese 100V specification electrical products are compatible with 110V.
Did you edit the sound? The vacuum cleaner seems very quiet.
The power of the dust collector is minimized.
One teeny weeny little concern. By adapting the wiring on a device you most likely void the warranty.
If the adapted device was involved in a fire then you might find your insurers a tad reluctant to cover the claim.
I daresay a more elegant solution could be achieved by commercially available "fit for purpose" kit.
That said it was a clever idea, but, the few seconds it saves to operate a vacuum cleaner is really neither here or there.
And you might ask how busy you are to need to shave off a few seconds here or there.
集塵機って色々なところに繋げるので手元にスイッチあると便利そうですね。
👍👍👍
Блок питания можно подсоединить к сетевому кабелю и спрятать внутри пылесоса
❤
吸い込み口に有線で直接スイッチを取り付ける事はできないのかな❓
👍👍👍❤👌
блок питания лучше разместить внутри корпуса, розетка снаружи пригодится. и ничего лишнего снаружи не торчит.
There's a better way to do this, without hacking into the vacuum cleaner circuitary.
Get current sensing relay. A relay that would close the power supply (turn on) to the vacuum when it senses current flowing thru another circuit (the power tools).
The function is standard on this dust collector.
大変有用な動画ありがとうございます。
私も同じ改造をしたいと思い同じリモコンリレーを購入しましたが
説明書の日本語がいまいちで理解出来ません。
動画を拝見するとリモコンボタンを押している間だけ動作する
モードの様ですが、どの様に設定されたのでしょうか。
自己レスです。
Amazonの商品頁の最後の図に動作モードを決めるショートポイントの絵があります。
購入時は左側2点にチップ抵抗が入っており、右側2点はオープンになっています。
左側のチップ抵抗を外し、右側2点をショートするとリモコンボタンを押している
間だけ動作する様になりました。
リモコン接続して、なんとか動作する様になりました。ただ、リモコンのスイッチボタンがBを押してからAを押さないと、ON OFFできません、出来ればリモコンの設定方法をUA-camの方でUPして頂けると、たすかります。それと、リモコン操作した後本体のスイッチを一度OFFにしてからONにしないと本体のスイッチがONになりません。接続は何回も何回も見て間違えはないと」思うのですけれども?お返事を頂けると、幸いです。
マネをさせてもらったのですが、うまくいきませんでした。配線は間違えていないと思うのですが、リモコンの操作がBを押してAを押さないとONにならない、OFFにする時はBを押してAを押さないとOFFにならない
本体スイッチはリモコンBを押してからスイッチを入れないと作動しない
どうゆう事でしょうか?
リモコンのスイッチはカスタマイズできますよ。
取説が付属していると思うのですが?
JSK-koubou
取説通りにしてもうまく出来ませんでした。
チップの入れ替えはしなくても良いですよね?
なんとなく分かりました。
中華語の略称なので変な日本語でよくわからなかったですが、リモコンの操作切り替えは受信機側の学習ドットを繋げてリモコンのセットアップをするって事ですよね?
ちなみに初期設定からリモコンのセットアップをし直したんですか?
this man is japanese patriot ,always using only Makita
👍
Теперь появилась другая проблема, как не потерять брелок)
100均のUSB電源とUSBケーブルを使って内部に仕込めばもっとスッキリしますね
Да спрятал бы блок питания внутрь корпуса, места там навалом.
Seems like whoever designed the original switch did not have much idea of how this equipment might be used.
Хорошая идея, но розетка занята. Да и пульт будет постоянно теряться...
They already have remote power plugs for this $20.
👍👍👍🇲🇽🇲🇽🇲🇽
Podia alimentarlo desde dentro y tendria el enchufe del aspirador libre que es muy importante, y sin cables por fuera, me parece una chapuza.
改造しなくてもリモコンコンセントで用が足りる
0:51 それができないから
そうでしたかすみません。
旧型のマキタの集塵機でリモコンコンセント使ってるもんで。
今のはできないんですね。
A Christmas lights switch that controls an outlet is about $10, often comes in a three pack with a remote. Worst case, get an IOT wall plug switch and control through a smart speaker via voice command. I would not recommend modifying the inside of the vacuum. Lost of cool projects on this channel otherwise.
The answer to your point is in the video.
Let's watch the video next time!
🥰👏👏👏👏👏👏👏👏👍👍👍👍👍👍💯💯
Or just buy a wireless socket set with remote, easier and safer. I now have one button that turns on/off my table saw, dust extraction and light all at the same time. £15!
Dave Robinson my thoughts exactly. That's the setup I have. No cut wires. No opening tools or exposing dangerous voltages.
@@GregoryFeeney Hi, not in this case because the switch need power to work. (beginning of video, won't start if no power).
Dave Robinson, can you link me a product you are using please?
Alexa, switch on the dust collector!
Thanks for the video but that cable dangling outside the machine is totally NOT at your style AND level of elegance! Come on you can do MUCH better than that! Keep up the great content!
I agree, he could have tapped into the 100v supply inside the case to power the wall wart.
My remote switch is my foot.
What's the point in this keychain? If you have to drag the vacuum cleaner to the machine and connect the hose, then it makes no difference whether you press a button on the remote control or a button with your foot.
It is necessary to transfer the power contacts to the edge of the vacuum cleaner hose so that by plugging in the hose you simultaneously turn on the power of the vacuum cleaner. And do the control on the current relay so that the vacuum cleaner turns on itself when you turn on the machine and turns off when you turn it off.
---
Какой смысл в этом брелке? Если тебе приходится перетаскивать пылесос к станку и подключать шланг, то уже нет разницы, нажимать кнопку на пульте или клавишу ногой.
Нужно перенести контакты питания на край шланга пылесоса, чтобы втыкая шланг ты одновременно включал питание пылесоса. А управление делать на реле тока, чтобы пылесос включался сам тогда, когда ты включаешь станок и отключался, когда ты его выключаешь.
Not very well explained as he went along and I had to guess on what wires went to where!!
電源も内蔵しなかったのは何故ですか
純粋にスペースがなかったからです。
+!
Use a Festool vacuumcleaner starts by your maschine. This is hobby shit. FESTOOL is the way dompass
Wondering why this content popup on my YT notif ... I'm not subscriber ?!
and ... LOL ... why so complicated to turn-on/off your dust collector remotely with such modification ?
Now day you can easily turn-on/off all of your electronics devices/tools etc with your Android or IOS, just bought smart plug or wifi plug. If you are really like modifications or electric hobby then better to do mods. on the AC Plug instead doing the mods. in your electrical device.
have you even watched the video? it is explained why the mod couldn't be done with a switchable plug...
技適付いてなさそう
そういえば今は販売も禁止でしたよね?違ったかな?
そもそも技適外の製品なのかな?
今更ですが、技適ついてました。
@@jisakukobo ご返信ありがとうございます。2:11でマークの存在が確認できますね。
crimps would be preferable to solder joints
Or Wago 221 connectors perhaps?
@@t1n4444 wasnt familiar with that product line. are they expensive? they look very interesting
@@dincerekin No not at all. Extremely effective and extremely easy to use.
The product range is fairly comprehensive as you have probably seen.
Buy them in boxes of tens or thousands.
(Quick aside: I now use bootlace crimps on the stranded wire ends to make the task of wire insertion and removal even easier, and not have to worry if stray strands of copper get separated from the rest.)
@@t1n4444 how do they compare to these more traditional connectors?: www.amazon.com/terminals-connectors-insulated-electrical-standard/dp/B07B46ZMPG
As this is what i personally would have used as i have it on hand.
スイッチを自作してください。
Not impressed this time.
この無線リレーは日本の電波法に触れてないでしょうか?。
便利なのは結構なのですが、違法電波が心配です。
自動車のキーレスエントリー程度の微弱電波でしょう。規格は取ってないと思いますが。。