Thanks for sharing this. I had the same error code and symptoms. I had the Quooker engineer look at it this morning (under warranty) and replace a temperature sensor. Apparently there is an issue with the sensor where it does not regulate the temperature of the cooling unit properly causing it to get too cold resulting in a build up of condensation which then trips the leak sensor. Part numbers on the failed sensor are 50.315.00_A and TSK10F7 05-23 NL The sensor is accessed from the top; remove back cover, remove red top, flip back a plastic unit on top, the sensor is positioned inside a tube and slides out. Black circular plastic cap with a black wire connected to it. The engineer also reminded me that the units are under a two year warranty and after this, parts and labour should be covered under a £125 call out fee. Hope this helps.
Wow, vielen Dank, top Anleitung! Bin kein Profi (doch mittelprächtiger Heimwerker) und hab es dank deiner Anleitung in 30 Minuten gefixt! Mega Move von dir!:-)
Vielen lieben Dank,es freut mich das es gut geklappt hat auch bei dir,das Thema quooker ist interessant da es verschiedene Störungen und Ursachen hat.👋🤗
I had the same issue, but fixed it a bit differently. I didn't have the right screwdriver, but found out a flathead screwdriver also gets the screws out. After that I did not remove the hoses, I just opened the bottom of the backside until it was open far enough to reach the drip tray. It worked for me, but be careful not to break the plastic when you bend it too much
I now have the error E2 on my quooker,you have to reset it. It's something with overheated Cube but nothing special,Cube needs some air to work perfectly
Thanks for your time👍 We had a quooker technician to look at the cooler. I had tried a reset before he came, but didnt work. He made a software update on it, but the error is back. Im more on valve error. They changed the first we had. Didnt work after unpacking! And now the cooler is almost doing the same as the first one. Well, im not fond of quooker. If it wasnt for my girlfriend, we wouldnt have it.
I had the same problem, but after waiting on help from quooker I tried to start and restart it more times, it just show error E8, do you have any tips for that ?
Ese problema te volvera a pasar por condensación, la única solución es sustituir la bandeja blanca por una nueva que salió que es negra, esta bandeja viene preparar para evitar la condensación.
Boiled Water tap✅️
amzn.to/3QC7rhr
Thanks for sharing this. I had the same error code and symptoms. I had the Quooker engineer look at it this morning (under warranty) and replace a temperature sensor. Apparently there is an issue with the sensor where it does not regulate the temperature of the cooling unit properly causing it to get too cold resulting in a build up of condensation which then trips the leak sensor.
Part numbers on the failed sensor are 50.315.00_A and TSK10F7 05-23 NL
The sensor is accessed from the top; remove back cover, remove red top, flip back a plastic unit on top, the sensor is positioned inside a tube and slides out. Black circular plastic cap with a black wire connected to it.
The engineer also reminded me that the units are under a two year warranty and after this, parts and labour should be covered under a £125 call out fee.
Hope this helps.
Thank you so much for sharing your experience.
It's a top product,I use it every day for 2 years now 👌
Wow, vielen Dank, top Anleitung! Bin kein Profi (doch mittelprächtiger Heimwerker) und hab es dank deiner Anleitung in 30 Minuten gefixt! Mega Move von dir!:-)
Vielen lieben Dank,es freut mich das es gut geklappt hat auch bei dir,das Thema quooker ist interessant da es verschiedene Störungen und Ursachen hat.👋🤗
Antonio, thank you very much, your video was very helpful. Everything is working properly again
Thank you for your comment 🙏
Many Thanks! It worked!!❤
Thank you so much for your comment 🤗
I had the same issue, but fixed it a bit differently. I didn't have the right screwdriver, but found out a flathead screwdriver also gets the screws out. After that I did not remove the hoses, I just opened the bottom of the backside until it was open far enough to reach the drip tray. It worked for me, but be careful not to break the plastic when you bend it too much
Thank you so much for your comment and explanations.
🤗
Thank you, it's working perfect again. TOP video. 🙏
Thank you for your comment and for watching my channel 🤗👍
Thank you very much, your video clear and helpful.
Thank you for your comment 🤗
Thanks 👍.
Thank you for watching my video 🙌🤗
1A Video! Hat mir geholfen!
Vielen lieben Dank 🙏
Thanks for a good video explanation.
Do you maybe know what the E2 error mean?
I now have the error E2 on my quooker,you have to reset it.
It's something with overheated Cube but nothing special,Cube needs some air to work perfectly
Thanks for your time👍 We had a quooker technician to look at the cooler. I had tried a reset before he came, but didnt work. He made a software update on it, but the error is back. Im more on valve error. They changed the first we had. Didnt work after unpacking! And now the cooler is almost doing the same as the first one.
Well, im not fond of quooker. If it wasnt for my girlfriend, we wouldnt have it.
@@allanquvang-n5v it's maybe the ventilation?
@@allanquvang-n5v El error E02 es un problema del compresor se debe sustituir el CUBE por uno nuevo.
Quooker engineer mentioned that E2, E3, E4 could all be related to a failed temp sensor. He replaced the sensor for me to resolve an E4 code.
The red light is just flashing on the tap, all the connections are not a problem, why can it be?
It can be the temperature sensor from the water tank or a connection.
I had the same problem, but after waiting on help from quooker I tried to start and restart it more times, it just show error E8, do you have any tips for that ?
Hi,thank you for your comment,i can help you on Monday, and then I will become the whole error list from quooker 👍
I'm checked the error list now.
The error E8 is high temperature in the tank.
Yes, but its has been turn off for a week and when i power it on again it comes straight away.
@nickscharpenbergandersen9756 Maybe it's a temperature sensor,probably you have to call the quooker service
sustituir sonda de temperatura de CUBE para solucionar error E08 después actualizar CUBE a ultima versión.
We have an E9 malfunction and the red light is flashing on the tap
It's maybe the connection between the tap and the water tank?
If you have a filter, remove the filter, that helped us.
@@tommikunda7106 thank you for your help👋
E9 arızam var yardım edermişsiniz acil
Can u write to me in English,Italian o German please🤗
Ese problema te volvera a pasar por condensación, la única solución es sustituir la bandeja blanca por una nueva que salió que es negra, esta bandeja viene preparar para evitar la condensación.
👍