Yes, you can move it around, provided the location is within the coverage of your router. In case you are connecting the camera direct to your phone without a router, your new locations should he within the reach of your access point and your phone
Have placed the camera outdoor and powered on. I see a blue light on the light bulb. Will the blue light remain ON all the time? Is there a way to switch off using the V380pro app? Thank You
Thank you for informative video. Many friends posted a problem after access point ..connecting wifi to camera..answer is Go to wifi ... connect to mv .. return back to app ..your cam is armed. Go back to wifi .. connect usual wifi
You would have to configure the other router too. You can use the AP Hotspot configuration method. You can watch that method in the video below ua-cam.com/video/UXQLheiI1gw/v-deo.html
Some of the questions I have are 1) how does it work for a person who has more than one shop? 2) how will the phone capture a long distance between the phone and the office where the camera is installed? 3) Can on app work for more than one camera?
1. You can get them installed in all the offices and monitor all of them on one app. 2. You can do that over the internet. 3. Yes, you can use one app to monitor many cameras.
Thanks very much Joan. There are more videos when you visit my channel at www.youtube.com/@Tech_inside_out Let me know if there are questions regarding any video.
Without a wifi, you can connect it direct to your phone via the access point of the camera. In that case you cannot access the camera over the internet when you are far away from home or office where it is installed.
So does the camera have an on off switch for outlets that are always on with no wall switch? Also must your phone stay on the ssid they gave you or can you switch back to THE BLESSED? Im assuming the live feed wont work if im at work and the camera is home. Thanks for the video
Yes, the camera has an off and on switch for the light. You don't have to stay on the ssid, once you set it up to record, you can even monitor the camera from a remote network. The Live feed works even when you are out of the local area network. Please see this videos that I tried to explain the features. ua-cam.com/video/NWJ6prtYI8o/v-deo.html Please let me know if I have fully answered your questions.
I did an installation of two bulb camera, I was to scan the qr code from the phone but I couldn't so I use the AP hotspot connection, but the two camera can't work at once, I have to disconnect one camera. Also if I leave the place, the camera stops working. What do I do?
1. The two cameras should be able to work at thesame time. You should check your setup. 2. Have you used your phone as hot spot to the camera? If not, the camera should work even in your absence.
Hello sr I would love to know what kind of router name your using and does everything need a internet connection I brought a router but it's not working for my bulb camera
Any router works on this camera, even if you don't have a router, you can connect to the ssid of the camera without using a router. The router only helps to connect the camera to the Internet
Once I connect to camera I lost my wife internet that means either I can use internet or I can access to camera? Both cannot be use at same time. What if I am not near to my camera. Can I access it from a remote location. If yes than how
Please Sir some of us would have loved to see how the bulb holder installation went about for us who have to use the holder the camera comes with. The color code for the positive and negative of the cable used to give electrical power to the bulb holder. Please help with this
It is a normal lamp holder and you may even decide to use a holder for normal light bulb which is already installed. If you are not very conversant with Electrical works, you may have to ask an electrician to install the lamp holder for you.
The process will be similar, just that the Access point name format will be different, you can refer to your manual to check how the name of your camera's access point will be like.
You need to setup an emergency power supply instead of the UPS. In later videos, i will be sharing my knowledge on how to setup back power for CCTV and for other purposes. That will be a major area that i will cover expensively. Am preparing towards that.
Hellow, I'm in the process in connecting the camera into my device but I can't since the QR code is missing and the the ID number as well. Is their any possible way to connect the camera on my device?
Hello, Sorry for the difficulty, I may have to research on the other way to do it in the absence of the QR code. Please give me a reminder if I do not get back in 2 days
My question goes like this...can the bulb camera work without a WiFi and can I store it in the shop and I view it from my house if I don't go to the shop where I do my business so I can see my sales girls working or trying to play funny with my business
After i watched your video i loved it and i bought one but the problem that i face is that it has 64gb memory but it will record only for 5 minutes so could you help me with that how to fix it please??
Is it that it gets full and the recordings stop? Or there is space and yet it stops? If it is that it gets full and stops, you will have to choose overwrite when the drive is full. Perhaps your recording quality is high, thereby making the recordings very large in size. If there is space and yet it stops, it might be a recording setting chosen. Please contact me by WhatsApp when you try and do not make any headway.
Please I need Ur help after I registered I and wanted to login again is still showing please enter Ur account for the first column And password for the second colum what can I do sir, I will like to have Ur WhatsApp number
Hi, how can I get a notification directly to my phone in real time? I want to get a notification when people access the camera, how do I do it in the settings?
I have installed a micro SD card but i can not see the video. I only see a singel picture of the motion detection alarm. The SD card is formatted in the camera and show 100% . I like to see the video but not conect to the cloud. Is that possible ?
please when i move away from the source of wifi and try to use my mobile data to view, it cant connect. i am using the camera"s own app called SUNISEE and not V360. I have also downloaded the v380 app but it cant connect to the bulb.
My bulb doesn't have QR code, and neither does it have it on the leaflet. As a result, I have not been able to set it up. I bought it online so I cannot do otherwise. Please what can I do?
I will have to research whether it is possible to do a remote connection without first establishing a connection onsite before taking away. I will keep you updated please
After installation and all connections , can I be able to monitor my home even at a distance. For example when I travel like 20km away from my house. Can I still see live video being captured by my camera.
Please I need help on how to do that I have done everything but I notice that the camera only connect when am very close it and with that I switch off my phone Wi-Fi off it only show connecting unless I put it on
I tried installing a bulb camera for a client but it completely failed. I could not figure out what the problem was up to date. It gave me hard time configuring it.
@hasan-bx2vv I suspect you were using thesame phone you intend to view it on as the hot spot right? It should not be so, that just like trying to let your phone connect to its own hot spot.
Exactly Done And working Thanks Mr your video Solves my problem...
Am always super excited with these results. Thanks for sharing this success story.
I need to know if it's possible to can save some of the footages in the phone for extra safety incase I loose the bulb with the memory card
Yes, you can record videos onto your phone
Is it possible to mute the sound on the camera?
@tiisetsoleripa1474 Which sound please? Is it the prompts you hear when setting up the camera? For the prompts, you can't mute.
Hey can u move the bulb from one place to another in same house with same internet and it still wrks?
Yes, you can move it around, provided the location is within the coverage of your router. In case you are connecting the camera direct to your phone without a router, your new locations should he within the reach of your access point and your phone
one of the best explained instruction setup i ever ran across in years, excellent explained setup instructions, thanks✍
Most welcome. There is more on my channel when you visit www.youtube.com/@tech_inside_out
How to make setup of two pro camera in the same place by using Wi-Fi pro camera app please?
Thank you sir perfect explanation.
Please can u view from any location
Have placed the camera outdoor and powered on. I see a blue light on the light bulb. Will the blue light remain ON all the time? Is there a way to switch off using the V380pro app? Thank You
You can turn it off
How please I just bought it@@Tech_Inside_Out
How
Does the lenses in the camera indicate any light to show it’s working or it’s just black
Hello Irene,
It doesn't show any indicator, unless in the night where the light could be turned on since it is designed to work as light in disguise.
Thank you for informative video.
Many friends posted a problem after access point ..connecting wifi to camera..answer is
Go to wifi ... connect to mv .. return back to app ..your cam is armed.
Go back to wifi .. connect usual wifi
Thank you too
so the bulb should be lighted/on everytime even on morning to work?
No, the bulb has a control on the app where you can switch on and off. Even in the off state of the bulb, the camera still works
Can the feed from this camera be view over the internet?
At a different location
Yes, you can as I have shown in the video
No, you didn't.
Only connected to the router at the beginning, then the camera's AP.
Thats what i saw
@@Tech_Inside_Out
@@HoEuphoria I will review the video and ig possible do the remote view separately. I will keep you posted.
Thank you.
@@Tech_Inside_Out
Thank you
Can it be used for outdoor!
Can u make video on other type of camera available and compare them at for benefits
1. This particular one is for indoor use only.
2. Your suggestion is well noted.
Will you have to start the configuration process again when you want to connect the camera to another router or is there a shortcut to do it?
You would have to configure the other router too. You can use the AP Hotspot configuration method. You can watch that method in the video below
ua-cam.com/video/UXQLheiI1gw/v-deo.html
Thanks for your video. What if there is no light. Can i still get access to the camera?
You may need a source of power to have the camera on to be able to always have access to the camera
Does the camera goes off or get disconnected directly? After 4hours?
No,
@Tech_Inside_Out thanks
Once I programmed the camera, can I switch or plug in the camera somewhere else or if I want to change location do I need to reprogram?
Once you set it up, that's all, you can relocate it from place to place without having to set it up again.
Some of the questions I have are
1) how does it work for a person who has more than one shop?
2) how will the phone capture a long distance between the phone and the office where the camera is installed?
3) Can on app work for more than one camera?
1. You can get them installed in all the offices and monitor all of them on one app.
2. You can do that over the internet.
3. Yes, you can use one app to monitor many cameras.
What about the distance
Thank you so much sir, my question is, can it be possible to be viewing it on two devices?
Yes, you can view on two or more devices
My camera does not have the QR code printed on the bulb so how do I get the camera details to connect tomy WiFi router? Thanks
Please refer to your product manual to see if there is an other means of linking the camera other than the use of the QR code
Do you find a soultion?
Hello, good... a question... how many hours of recording would I have on a 128GB memory card? Do you have any idea? thank you...
I can't really tell, i may have to research on this.
@@Tech_Inside_Out thanks for request...
Can the bulb be used like a source of light in the house or it doesn't bring light?
The bulb gives light but not so much bright to be used in the house.
Thanks, just bought it yesterday and it doesn't have light just talking
@@kaytejulius5231 That might be another version. Have you been able to set it up?
I'll ask someone to come and fix the holder for me
@@kaytejulius5231 Alright.
Thank you for your tutorial. Much much easy. 😊
Thanks very much Joan. There are more videos when you visit my channel at www.youtube.com/@Tech_inside_out
Let me know if there are questions regarding any video.
suppose a thief comes and steal the camera, is there another footage back up. or once it is stollen that is the end of it all?
When the camera is stolen, you will lose everything. Unless you are concurrently doing the recordings on your mobile device.
Question: can I connect this smart camera with my TV using a goggle chrome cast and how do I connect this ?.
I haven't tried that. I will have to do that and give feedback
Does the camera need to be connected to a charger for it to work? Or does it have a battery that needs to be charged? Help sir
The lamp holder power it.
I want to know if I can use a mobile or wireless router for the connection?
Yes, you can use a wireless Router
thanks prof but if im far some where can I connect to what is taking place where the camera is set?
Yes, you can view the camera from anywhere in the world
WAU wau
Can i do my setup at one location and move the bulb to its permanent place afterwards?
Yes, you can do that but it should be within the coverage area of your router
@@Tech_Inside_Out thank you!!
Can this camera work if the source of power (electricity) is switched off?
It can't work without power
Meybe not
What about if i dont have a wifi router with me, will it still connect and work...?
Without a wifi, you can connect it direct to your phone via the access point of the camera. In that case you cannot access the camera over the internet when you are far away from home or office where it is installed.
Do I need a permanent WiFi in the house for the camera to work
Yes, for as long as you will require to view your camera on the Internet
Do you know if it is possible to connect this bulb cam to blue iris?
I haven't tested it with Blue Iris. I will have to get back to you on this please.
do i need to leave it "switch on" for the camera to work?
Yes, power to that lamp holder must be always on but you can turn off the light on the camera from your phone whiles the light switch is on.
and the cctv/camera still working?
My problem is Reset Button. no response when I press. I setup camera wifi password but now not recognised. I think factory reset will help
You need to press and hold the reset button until you hear a response.
I buy one and I don't know if I could use it from distance (using Internet) ?
Hope you reply soon !!
Yes, you can view it wherever you are in the world, once you have Internet on the router.
Can the bulb be used without electricity
No
Plan to use SD Card without internet
1. Is it motion activated? Or is always recording?
2. How much hours will 64gb SD card record?
1. You may have to choose motion detection recording.
2. That depends on your recording format, either SD or HD
Camera sends real time alerts on your smart phone whenever any motion is detected. Any Alarm or vibretion goes to my phone?
Yes, you will receive all live notifications to your phone
@@Tech_Inside_Out By alarm/Tone/vibretion ?
Till how much range it will be connected?
Unlimited distance when you have Internet.
@@Tech_Inside_Out suppose I have installed it in my home and I leave around 400km away it will be connected?
So does the camera have an on off switch for outlets that are always on with no wall switch? Also must your phone stay on the ssid they gave you or can you switch back to THE BLESSED? Im assuming the live feed wont work if im at work and the camera is home. Thanks for the video
Yes, the camera has an off and on switch for the light. You don't have to stay on the ssid, once you set it up to record, you can even monitor the camera from a remote network. The Live feed works even when you are out of the local area network.
Please see this videos that I tried to explain the features. ua-cam.com/video/NWJ6prtYI8o/v-deo.html
Please let me know if I have fully answered your questions.
I did an installation of two bulb camera, I was to scan the qr code from the phone but I couldn't so I use the AP hotspot connection, but the two camera can't work at once, I have to disconnect one camera. Also if I leave the place, the camera stops working. What do I do?
1. The two cameras should be able to work at thesame time. You should check your setup.
2. Have you used your phone as hot spot to the camera? If not, the camera should work even in your absence.
@@Tech_Inside_Out I used a router to do it but I use the AP hotspot
Can i connect more that 1 cameras to my phone? About 5
And is it possible to silent the voice from the camera so noone will notice that its a camera
Yes, you can do that, please watch this video
ua-cam.com/video/Qz73St_1P34/v-deo.html
Yes, you can do that
Can this camera work without a router and i just use my phone to view what took place like the day before when am away?
1. Yes, you can use it without a router
2. You can playback your recordings
@@Tech_Inside_Out how can I use it without a router
Nice video. Can I view more than one camera on a single phone?
Yes, you can
Hello sr I would love to know what kind of router name your using and does everything need a internet connection I brought a router but it's not working for my bulb camera
Any router works on this camera, even if you don't have a router, you can connect to the ssid of the camera without using a router. The router only helps to connect the camera to the Internet
How can I link the camera with router ?
which software or app can I use to play Videos from SD card.I tried with VLC and it was Unsupported .
With this camera, you can play the videos on the SD Card whiles the Card is still in the camera. You can use the playback function to do that
Once I connect to camera I lost my wife internet that means either I can use internet or I can access to camera? Both cannot be use at same time. What if I am not near to my camera. Can I access it from a remote location. If yes than how
It is not supposed to be so. When you feed a wifi network to your camera, you can access your camera wherever you are in the world.
please do you have a link where i can purchase this i've searched for it on amazon didn't see this particular one
I bought it in Ghana. I don't have an online link. If you live in Ghana, I can direct you to the shop
What distance those the camera cover?
You can view this camera from anywhere in the world, provided you connect Internet into it
Please Sir some of us would have loved to see how the bulb holder installation went about for us who have to use the holder the camera comes with. The color code for the positive and negative of the cable used to give electrical power to the bulb holder. Please help with this
It is a normal lamp holder and you may even decide to use a holder for normal light bulb which is already installed.
If you are not very conversant with Electrical works, you may have to ask an electrician to install the lamp holder for you.
I just bought mine but the bulb is different at the top it has screws but this one is rounded. Please how can i go about it?
The process will be similar, just that the Access point name format will be different, you can refer to your manual to check how the name of your camera's access point will be like.
If the light is gone then will the camera be switched off?
When the light on the camera goes off, the camera still works.
But if you switch off power to the camera holder, the camera will go off
So the bulb most always be on?
Yes
Please will the SD card still record without internet access
Yes, it records without Internet.
Do you need a computer to connect a wi fi camera. To phone
No
Can i use the mobile data to connect wifi. Because i jave no wifi router
You can use the hot spot of a phone as Internet source to the camera but you can't use thesame phone for remote view of your camera.
please can you still view the video from the camera if you move far away to a different place?
Yes, you can but you must have Internet connection into the camera to be able to do that
Thank u so much for this explanation
You are welcome
Please how do I connect and moniter my camera on two mobile phone ? Jovision to be specific.
Please watch this video
ua-cam.com/video/u3_CeH2FJDs/v-deo.html
Can i use my data bundles if there's no wifi in my area?
You can use your phone data but you can't use that same phone to remotely log into the camera
Due to power outage problem I converted my camera on ups power supply but every time it make voice when electricity off plz answer
You need to setup an emergency power supply instead of the UPS.
In later videos, i will be sharing my knowledge on how to setup back power for CCTV and for other purposes.
That will be a major area that i will cover expensively. Am preparing towards that.
@@Tech_Inside_Out plz tell some time camera stop recording why
How long does it stay powered on?
For as long as you want to view imaged through this camera
Hello, what if the place has no wifi, can it work without the network
Yes, you can connect directly to your phone without using a wifi
Hellow, I'm in the process in connecting the camera into my device but I can't since the QR code is missing and the the ID number as well. Is their any possible way to connect the camera on my device?
Hello,
Sorry for the difficulty, I may have to research on the other way to do it in the absence of the QR code. Please give me a reminder if I do not get back in 2 days
@@Tech_Inside_Out okay, thanks a lot! 😊
My question goes like this...can the bulb camera work without a WiFi and can I store it in the shop and I view it from my house if I don't go to the shop where I do my business so I can see my sales girls working or trying to play funny with my business
The bulb camera works without a WiFi but if you want to access it from a far distance away from where you place it. you will require a WiFi
can you still use it without the router
Yes, you can but that will mean that you cant access the camera remotely.
Thanks very much for the tutorial , lengthy but it is worth it👌👌
Thanks very much, you can find more of my videos at www.youtube.com/@tech_inside_out
After i watched your video i loved it and i bought one but the problem that i face is that it has 64gb memory but it will record only for 5 minutes so could you help me with that how to fix it please??
Is it that it gets full and the recordings stop?
Or there is space and yet it stops?
If it is that it gets full and stops, you will have to choose overwrite when the drive is full. Perhaps your recording quality is high, thereby making the recordings very large in size.
If there is space and yet it stops, it might be a recording setting chosen.
Please contact me by WhatsApp when you try and do not make any headway.
Please I need Ur help after I registered I and wanted to login again is still showing please enter Ur account for the first column
And password for the second colum what can I do sir, I will like to have Ur WhatsApp number
Thanks so much sir, one thing I didn't see and which I think we should have seeing, is the switch to on the camera.
The camera itself does not have a switch, it has a reset button. The switch would be the one controlling the light socket
Can I use a mini mifi for the camera and view it away from home
Yes, you can use a mini mifi
Can you pause the camera?
You can pause the recorded videos but not the live camera feed.
this bulp can use outside please
No please
How can I get the qr cold if the one on the camera is messing the qr cold on my camera missing how can I generate a qr for it ?
I will have to check and get back on this
@@Tech_Inside_Out please am still waiting thanks
I wanted to configured my camera,but i was ask to enter my acct with pawd...which acct is that,before access to add camera...
You would have to create a user account using your email address and password on the app
Very nice and clear explanation..I can follow your instructions very well..good job
Thank you. You can find more of my videos at www.youtube.com/@tech_inside_out
What if the camera doesn't show any image or movement in live?
Perhaps the configurations are not rightly done
So can you install without a wifi?
Yes, you can install it without a WiFi.
Please can you add multiple cameras
Yes, you can add multiple cameras
I'd love it if the PC software could be uploaded here, the one I downloaded keeps telling me failed on my laptop anytime I want to use it.
Thanks
I will try and get to share
You arr superb in explanation, the tone of your voice expresses it algorithms 😃
So how I can add another camera to it?
You can do so from the homepage of the app by tapping on the + sign and follow the prompts
So what happens when I'm not on the same network with the camera later on
You can add a camera through the add button you used in adding the first camera. The process is same as the first camera
Hi, how can I get a notification directly to my phone in real time? I want to get a notification when people access the camera, how do I do it in the settings?
I will try and do a tutorial to guide you.
Yes, its possible. You can do that in motion detection settings.
cant we use on mobile network?
Yes, you can use Internet from mobile networks but it should be placed close to the camera so as to make the Internet always available to the camera
I have installed a micro SD card but i can not see the video. I only see a singel picture of the motion detection alarm. The SD card is formatted in the camera and show 100% . I like to see the video but not conect to the cloud. Is that possible ?
Please see this video below, a portion shows how to activate the recordings onto the SD card
ua-cam.com/video/NWJ6prtYI8o/v-deo.html
mr ur knowledge is awesome
I give God thanks, He gives the wisdom.
please when i move away from the source of wifi and try to use my mobile data to view, it cant connect. i am using the camera"s own app called SUNISEE and not V360. I have also downloaded the v380 app but it cant connect to the bulb.
That means the there is no internet connection into the Camera. Please check the internet connection to the camera.
Hello, pls explain how to reset the camera incase its not accessing access point name
The camera comes with a Reset pin that you can press and hold for a brief moment to have the camera Reset.
Where can I get the product to buy. Any contact
You can get on Alibaba, Amazon or others. If you live in Ghana, you can contact me by WhatsApp on 055-6307182
My bulb doesn't have QR code, and neither does it have it on the leaflet. As a result, I have not been able to set it up. I bought it online so I cannot do otherwise. Please what can I do?
Please watch this video. It would guide you to set it up.
ua-cam.com/video/UXQLheiI1gw/v-deo.html
Very good explanation, but MV with camera number is not appearing for selecting network. Please how to enable MV with camera number.
Please reset the camera to factory default using the reset pin and restart the process all over
@@Tech_Inside_Outhow to reset?
@@mawilmaullion8352 There is a reset pin provided in the camera box. That's what you will use to reset from the pin hole at the top of the camera.
After click on the connect to AP spot ,the camera network is not showing.hiw can I rectify this
You will have to make sure the camera is on, and you reset the camera using the reset pin
Can we use this camera with mobile data
Yes, you can use a mobile phone to create a hot spot for the camera, but you cant use that same phone for remote view access
How about connecting far from home or any where
I will have to research whether it is possible to do a remote connection without first establishing a connection onsite before taking away. I will keep you updated please
Port forwading on the router, or vpn ....it allows your router to be in the same network when you are remote
India region is not available how can we set-up can you please ping a solution
You need to select Asia as your region and you will find India
How to reset and reconfigure the camera to Wifi please?
You can just use the reset pin to reset it
My SD card doesn't fit in perfectly, what should I do. Thanks
I suspect you are using a TF card, which is a smaller version of the SD card. Please get a holder to place it in and try it again.
@@Tech_Inside_Out the holder is too big
After installation and all connections , can I be able to monitor my home even at a distance. For example when I travel like 20km away from my house. Can I still see live video being captured by my camera.
Yes, you can view your camera wherever you are in the world, provided your Internet is active.
@@Tech_Inside_Outokay good I just got mine today but I want know how to monitor my camera in a distance
Yes, that's possible no matter your distance. You can access your camera from anywhere in the world
Please I need help on how to do that I have done everything but I notice that the camera only connect when am very close it and with that I switch off my phone Wi-Fi off it only show connecting unless I put it on
Can i use it without wifi?
Yes, just that you can't view it when u are far from the location of the camera
How can more than one camera be added on the app
You would go through thesame process of adding the first camera for the 2nd and so on
Do u pay subscription fees on app
No subscription fees
I tried installing a bulb camera for a client but it completely failed. I could not figure out what the problem was up to date. It gave me hard time configuring it.
You can follow the process i outlined invthis video and i believe you should be able to set it up
can you turn of and turn on the light
Yes, you can
can it connect to mobile hotspot or only a router?
Yes, it can use a mobile hot spot
@@Tech_Inside_Out how? it doesn’t work for me it’s only working on wifi
@hasan-bx2vv I suspect you were using thesame phone you intend to view it on as the hot spot right?
It should not be so, that just like trying to let your phone connect to its own hot spot.
Good video.But where exactly is the QR code on the bulb itself?
Is it possible to watch when you are not at the office
Yes, you can watch over the Internet from every part of the world