Just moved into my first house and just want you to know this video is STILL helping people! Thank you. Ive been waking up in a FREEZING cold house. Just set it all up to come on every morning and evening (just like in your video) so fingers crossed! 😊
Phew brilliant, you have no idea how long I’ve been stood there pressing and spinning that button , then looked once I thought I had set it and it wasn’t even on the right day 🤷🏻♀️ and no matter what I tried It was staying on. Your an angel 😇 set all my days for the same thingy 👍🏼 I hope.
OMG mate that was amazing thankyou. Usually good at reading instructions but these ones with the thermostat may as well have been in a different language. You made it look so easy. Bloody fantastic! Thankyou very much. 👍👍👍👍 Liked video.
Cheers buddy. Had a Greensted and this fitted last tear and blagged the fitter I knew how it worked as you do when your done with kitchen refitting lol...this video sorted me out and you cannot go wrong..well done mate thanks lol
How do I change the Eco temperature ? I want to be able to set three start / stop intervals per day, but in between these times, I want the boiler off, or at least at a very low level I recently got a Neomitis thermostat and programmed it, but to my surprise, I got up in the middle of the night and felt the house very warm. Because the thermostat was on the windowsill in the kitchen, the coldest room in the house with the door closed, the controller was telling the boiler to pump out heat. It seems the default Eco mode is 16 degrees, so I am wondering if I can change this.
Hi Great Video, What I don't get is my radiators come on outside of my pre-set times?, I have the TRV'S fitted the boiler seems to fire all the time but the flame symbol isn't showing on the display ( Vaillant ecotec pro30 ) & for the eco & comfort settings I'm totally lost with them? Any info would be really appreciated. Thanks.. Terry..
Time to get someone to look at this, do not turn all the rads off to solve this the pump and heat needs somewhere to go. Normally the boiler would be looking for heating on 24 hrs a day then the neomitis stops it when at the desired temperature. Good luck but sounds like you need a engineer to check this out
@@GHancock Thanks for the reply, Yeah looks like I'm going to have to give them a call its only been installed 6 months ago, I'm pulling my hair out with it!!
@@shelltell1 same here- the installer set it for me and gave me the manual which is impossible to figure- heating came on on its own and I have no idea if the timer is on or not- guess I'll have to wait and see but this is impossible to control!
Can you please clarify, so in order for the timers to come on and off.. the switch at the side has to be on Auto and the other on Run for it to come on and off ? I know this is a very old video but I moved homes last year and it has taken me this long to figure how to use this.. only now finding your video which was very clear btw! so thank you! but not 100% clear as I just need that clarification!!
This has recently been installed in my home by the local council, how do you only operate it by the dial, I don't want any timers on etc I just want to turn it on n off when I want by the dial on the right
Think of the slider more timed…. Holding high temp…. Holding low temp….off. So I would flick to Holding Low temp and see if the dial still works.. due to me having Covid I can’t get to my van to double check..failing this set the two temperature for what you would like (make sure the lower temp is really low and the higher is still low ish then use the dial to manually override
Is there any way you can just switch your heating on when your cold and then switch off when your warm. To do this does you need to be on run and comfort mode? Fed up of radiators turning off when it hadn’t even hit the temperature I’ve selected?
You can switch it to the high temp 24/7 and just turning the dial up and down.. but you would be better using the times.. try setting the on/high temp one degree higher see if that helps. As long as the stat has a flame it, the rads should stay on
Yes not the most straight forward timer setting device. Could I ask what the difference is between the auto and the slot below the full thermometer slot pls ,? Is ‘auto’ mainly for a timer program ?
Any idea how to alter the overall time setting of the thermostat? Mine is currently hours off. Thinks it’s 8am when it’s currently 5pm? I’ve no ide how to correct the overall time setting....
Depends on life style, try to have it on more when your likely to be sat down.. and remember the body on needs a change of 1 degrees to feel a different
Tried the last few nights to use this so the heating comes on before I wake up but to no avail it is so complicated , I don’t want the heating on all the time I just want it on in the morning and then for it to come on just before I get home I am pulling my hair out :( is yours set to auto whilst your doing the settings or is it on low/high ?
tsmanchester you need to have on auto..set the low setting low enough to be off.. only to come on if the house got to cold...try 14c then It should stay off, unless it gets really cold, I run mine at 16 on it’s off temp
@@osobamask3 Yep, to be honest we hardly need central heating only once a year like now when its really cold, rest of the time we are used to electic heaters
Hi, I have one of these but for the longest time it's had an issue; when the desired temp has been reached the flame icon is still displayed (e.g. at say 21c / 21c), and I have to be vigilant and dial it down half a degree below the actual room temp in order to 'switch off' the flame icon. Is there a fix for this issue please?
The problem I have is that when the heating is off (because current temp is higher than that programmed), the water doesn't come on either. Is that normal? Surely I should always have hot water, especially when only water is switched on! Only works if I manually move the required heating temp above the current temp - if that makes sense. Can't be right!
It’s not right, it’s probably your zone valve on your hot water, sound like it’s opening allowing the flow through, but not opening enough to trigger its own micro switch which fires the boiler. However when the heating on the boilers fired from heating zone valves micro switch. Hard to tell for sure. But a definite possibility 👍🏻
Isn't it supposed to turn on ,on the time we set . But mine is turning on automatically when. Temperature below the setup number. How can I setup it to just turn on on the wanted time. For example I don't want on midnight to turn on even if it cold
This ones hard wired. But the RF version has just battery and it talks too the receiver through Rf which does your make and Break. You will need live neutral earth to the box, then 2 switching wires, Every boilers different, but try not to wire it so it’s cuts the main power to your boiler, as the pump needs to overrun after demand for heating has finished. Why not get someone in. You don’t want to damage the boiler. Good Luck
@@GHancock I have it all set, date time etc, put a programme on for the weekend. All I want to do is switch the heating on when I get in after work, but those are random times...I just want to switch on then off when needed, please help
@@GHancock What is RT0, how do I set it to this? I don't want all the time bullshit. I just want to turn the heating on or off when ever feel like it. Who ever created this thermostat needs punching in the face, like really hard.
We have had this fitted with an ideal boiler and I have been trying for ages to try and get it working where radeator are warm all time for winter for my 81 year old mam who feels cold more and will be home most time. We do not need to put it on a timer/program and we do not wish to. I have turned wheel to desired temperature 24 and low for 23 for now and radiators come on for a while then go cold do you have to keep turning wheel everytime you want radeator to be warm. What that's doing will be no good in winter. Our other boiler used to be saying circulating and kept radeator warm altime when it was on constant till we turned it off at night. This new one gas image comes on then goes off and boiler goes to 00 radiators dont keep on warm like our other one did. We will end up using electric fire to keep warm in winter just use boiler 4 water if this is how it is gonna be and end up with a dear electric bill cos of no constant heat in winter with boiler other wise I cold lose my mam. My dad died in Feb (not for that reasion) I don't want to lose my mam cos been cold. If you can help I would be grateful.
I pressed overide switch in kitchen in hope it would come on. But now worried because the red button is flashing. Think it was before though. Anyone know what to do to stop it?
I’m not 100% with out it being in front. But the biggest cause I’ve seen of this is people setting Pm at the start of the day. Instead of AM then everything too bunch up to set in the evenings
@@nathancox6249 if you use no. 1 setting as AM set to 9.00am the the next set back temp as 9.am that’s the first castle top notch, the no. 2 set,say 1pm the the set back time also at 1pm then save the last notch to just. Come on your PM time settings you desire. Although why you wouldn’t want your heating on in the day I don’t know 🤷🏻♂️🙂
Hi The heating was working but not anymore How do I get it back on? Not really sure how to make this work. I put it on the eco mode and it worked for a shirt while then stopped working. Now nothing works
Turn it on at the side switch, if a flame symbol appears the stats on. If you hear a small click within the stat, then the chances are it’s working, maybe the Zone valve on the system rather than the stat itself. Think it’s time to get someone in for that. Good luck
Great video that explains how to use this thermostat . The written instructions don't explain how to use it very well at all. Overall I would never by another Neomitis thermostat again. They are overly complicated and rubbish.
@@gamecubeon1187 unfortunately as thermostats play a key roll in saving energy a lot are far more complicated than this one, some out there even I have to scratch my head.. once you have it set you will probably only use the dial.. good luck
Quite good tutorial,but say like just want heating come in between 9 pm and 10 pm very day how program,maybe if you showed something like that be easier to follow
Just turn the dial, it should come on hopefully...This thermostat is one of the more simple room programmable stats. But I know you preferred a simple dial but this can save you a bit more energy hopefully, good luck with it
I just got this piece of junk installed in my home. My old one simply had and on and off switch, this one shoves a billion different options that make no sense in your face. Whats even more funny is the guy that installed it barely knew how to use it. He just said spin the dial thingy lolol..
You could just flick it onto on at the side permanently and turn it up and down… but I’d give it a try first.. but remember if you have a clock as well flick that on 24hrs. Or you could have two things trying to turn off and on
@@GHancock Yeah thanks man.. I've actually figured it out now, for some reason I wasn't getting it.. You have to have the manual temperature to be set higher than the larger temp on the screen for it to actually turn it on. I think it's pretty simple now.. Thanks.
I made this video for my customers to help them set the stat… most programmable room stats are over complicated, this one is lot more straight forward that a lot out there, believe it or not🙂
@@GHancock Yeah but the one I had before, you literally just flicked a switch and it turned on.. Guess all these fancy new feature put me off at first, I'm starting to get it though now. :) But yes, your video is very helpful, thanks.
![Programming - [Tutorials RT7RFPLUSc room thermostat]](http://i.ytimg.com/vi/je8SwcFfggo/mqdefault.jpg)
![Programming - [Tutorials RT7RFPLUSc room thermostat]](/img/tr.png)
Thank you! I was sitting here tapping my head trying to understand how to work this thermostat, your video was so straight forward 🙌
Glad to help 👍🏻
Just moved into my first house and just want you to know this video is STILL helping people! Thank you. Ive been waking up in a FREEZING cold house. Just set it all up to come on every morning and evening (just like in your video) so fingers crossed! 😊
Let’s hope it works 👍🏻
Just had a new boiler installed. Need a degree to read the manual for this thermostat, very overwhelming for the average person, thanks for the help.
Phew brilliant, you have no idea how long I’ve been stood there pressing and spinning that button , then looked once I thought I had set it and it wasn’t even on the right day 🤷🏻♀️ and no matter what I tried It was staying on. Your an angel 😇 set all my days for the same thingy 👍🏼 I hope.
OMG mate that was amazing thankyou. Usually good at reading instructions but these ones with the thermostat may as well have been in a different language. You made it look so easy. Bloody fantastic! Thankyou very much. 👍👍👍👍 Liked video.
Nice to get good feed back, makes the effort of making it all worth it👍🏻
Cheers buddy. Had a Greensted and this fitted last tear and blagged the fitter I knew how it worked as you do when your done with kitchen refitting lol...this video sorted me out and you cannot go wrong..well done mate thanks lol
Better on video anyway you can recap at any stage.. glad to help
Thank you, straightforward 👍
How do I change the Eco temperature ?
I want to be able to set three start / stop intervals per day, but in between these times, I want the boiler off, or at least at a very low level
I recently got a Neomitis thermostat and programmed it, but to my surprise, I got up in the middle of the night and felt the house very warm. Because the thermostat was on the windowsill in the kitchen, the coldest room in the house with the door closed, the controller was telling the boiler to pump out heat.
It seems the default Eco mode is 16 degrees, so I am wondering if I can change this.
Hi Great Video,
What I don't get is my radiators come on outside of my pre-set times?, I have the TRV'S fitted the boiler seems to fire all the time but the flame symbol isn't showing on the display ( Vaillant ecotec pro30 ) & for the eco & comfort settings I'm totally lost with them?
Any info would be really appreciated.
Thanks..
Terry..
Time to get someone to look at this, do not turn all the rads off to solve this the pump and heat needs somewhere to go. Normally the boiler would be looking for heating on 24 hrs a day then the neomitis stops it when at the desired temperature. Good luck but sounds like you need a engineer to check this out
@@GHancock Thanks for the reply,
Yeah looks like I'm going to have to give them a call its only been installed 6 months ago, I'm pulling my hair out with it!!
@@shelltell1 same here- the installer set it for me and gave me the manual which is impossible to figure- heating came on on its own and I have no idea if the timer is on or not- guess I'll have to wait and see but this is impossible to control!
Can't believe how poor the instructions were compared to this explanation! Many thanks!
No worries glad to help
Can you please clarify, so in order for the timers to come on and off.. the switch at the side has to be on Auto and the other on Run for it to come on and off ? I know this is a very old video but I moved homes last year and it has taken me this long to figure how to use this.. only now finding your video which was very clear btw! so thank you! but not 100% clear as I just need that clarification!!
You are correct, the front slider you will only move when setting and the side only for flicking to permanent on, off or timed (auto)
This has recently been installed in my home by the local council, how do you only operate it by the dial, I don't want any timers on etc I just want to turn it on n off when I want by the dial on the right
Try using the slider on the left, this will remove from auto
@@GHancock thanks for replying, appreciate it - the slider has auto, comfort, eco & standbye, will standbye be the best option?
Think of the slider more timed…. Holding high temp…. Holding low temp….off. So I would flick to Holding Low temp and see if the dial still works.. due to me having Covid I can’t get to my van to double check..failing this set the two temperature for what you would like (make sure the lower temp is really low and the higher is still low ish then use the dial to manually override
Is there any way you can just switch your heating on when your cold and then switch off when your warm. To do this does you need to be on run and comfort mode? Fed up of radiators turning off when it hadn’t even hit the temperature I’ve selected?
You can switch it to the high temp 24/7 and just turning the dial up and down.. but you would be better using the times.. try setting the on/high temp one degree higher see if that helps. As long as the stat has a flame it, the rads should stay on
Yes not the most straight forward timer setting device. Could I ask what the difference is between the auto and the slot below the full thermometer slot pls ,? Is ‘auto’ mainly for a timer program ?
Auto will vary to the Times you set… the full thermometer will hold at you're set on/high temperature permanent
Any idea how to alter the overall time setting of the thermostat? Mine is currently hours off. Thinks it’s 8am when it’s currently 5pm? I’ve no ide how to correct the overall time setting....
Is the program comfort period the timer ?
Can I have at different temperatures at different times?
Hello, you know once you have set the days and time what do I leave the side slide on where the auto bit is and do I leave the bottom slide on run??
Yep Run on the bottom slider, auto on the side one
@@GHancock thank you
What times would you recommend
Depends on life style, try to have it on more when your likely to be sat down.. and remember the body on needs a change of 1 degrees to feel a different
Tried the last few nights to use this so the heating comes on before I wake up but to no avail it is so complicated , I don’t want the heating on all the time I just want it on in the morning and then for it to come on just before I get home I am pulling my hair out :( is yours set to auto whilst your doing the settings or is it on low/high ?
tsmanchester you need to have on auto..set the low setting low enough to be off.. only to come on if the house got to cold...try 14c then It should stay off, unless it gets really cold, I run mine at 16 on it’s off temp
Hancock and Brown thank you but I can’t do it 😭 it never ever comes on in the morning
tsmanchester you must have it on auto, otherwise it will hold on its high or Low setting 24hrs a day
tsmanchester maybe reset it.. near the enter button and start again, watch your am and pms
tsmanchester make sure you use all the setting or set the middle on and off at 12.01pm and 12.02pm
After changing my batteries the thermostat still doesnt fire up the boiler for heating. What should i do please?
@@DotP2787 could be an eternal fault, zone valve etc..I advise calling a gas safe engineer in, they will test it all for you
Hi thanks for the video. I have a RT1RF similar to this. It says Service due OFF, which has rendered it useless. Does anyone know how to fix this?
hi did you find the solution to this problem because im having it right now it’s so cold!
Yes the solution unfortunately was to buy a electric heater and use that. This thing as far as I am concerned is a useless piece of s***
@@k671070 so you’ve been using an electric heater now for a year and have no central heating? wow
@@osobamask3 Yep, to be honest we hardly need central heating only once a year like now when its really cold, rest of the time we are used to electic heaters
@@k671070 thank you so much for your reply youre the only person who actually helped me
Hi, I have one of these but for the longest time it's had an issue; when the desired temp has been reached the flame icon is still displayed (e.g. at say 21c / 21c), and I have to be vigilant and dial it down half a degree below the actual room temp in order to 'switch off' the flame icon. Is there a fix for this issue please?
Nope- I'm stuck in a loop of forever winding that thing up and down!
anyone know how to change the month, ours has jumped a month to november
The problem I have is that when the heating is off (because current temp is higher than that programmed), the water doesn't come on either. Is that normal? Surely I should always have hot water, especially when only water is switched on! Only works if I manually move the required heating temp above the current temp - if that makes sense. Can't be right!
It’s not right, it’s probably your zone valve on your hot water, sound like it’s opening allowing the flow through, but not opening enough to trigger its own micro switch which fires the boiler. However when the heating on the boilers fired from heating zone valves micro switch. Hard to tell for sure. But a definite possibility 👍🏻
@@GHancock Appreciate the response thanks. Think it was probably an issue with the settings on the wireless controls. Seems to be working now 🙈
Isn't it supposed to turn on ,on the time we set . But mine is turning on automatically when. Temperature below the setup number. How can I setup it to just turn on on the wanted time. For example I don't want on midnight to turn on even if it cold
Lower the off temperature 👍🏻
How do you connect the receiver to the boiler because their is also no power on it so does it power off the boiler
This ones hard wired. But the RF version has just battery and it talks too the receiver through Rf which does your make and Break.
You will need live neutral earth to the box, then 2 switching wires,
Every boilers different, but try not to wire it so it’s cuts the main power to your boiler, as the pump needs to overrun after demand for heating has finished. Why not get someone in. You don’t want to damage the boiler. Good Luck
2 Inappropriate settings were done. How does one cancel these inappropriate settings? Thanks
The most ridiculously complicated device ever.
How do you just switch the heating on, then switch it off?????
Turn the dial up... or down , but it with go back to the set temperature at the times set... you could switch it for a RT0 which has no times
@@GHancock I have it all set, date time etc, put a programme on for the weekend.
All I want to do is switch the heating on when I get in after work, but those are random times...I just want to switch on then off when needed, please help
@@GHancock What is RT0, how do I set it to this? I don't want all the time bullshit. I just want to turn the heating on or off when ever feel like it. Who ever created this thermostat needs punching in the face, like really hard.
@@ChronosChris RT0 was it’s more simple version, no times just turn up and down. But it’s a straight swap
I think this was clearer- but still not sure how this works! Help!
We have had this fitted with an ideal boiler and I have been trying for ages to try and get it working where radeator are warm all time for winter for my 81 year old mam who feels cold more and will be home most time. We do not need to put it on a timer/program and we do not wish to. I have turned wheel to desired temperature 24 and low for 23 for now and radiators come on for a while then go cold do you have to keep turning wheel everytime you want radeator to be warm. What that's doing will be no good in winter. Our other boiler used to be saying circulating and kept radeator warm altime when it was on constant till we turned it off at night. This new one gas image comes on then goes off and boiler goes to 00 radiators dont keep on warm like our other one did. We will end up using electric fire to keep warm in winter just use boiler 4 water if this is how it is gonna be and end up with a dear electric bill cos of no constant heat in winter with boiler other wise I cold lose my mam. My dad died in Feb (not for that reasion) I don't want to lose my mam cos been cold. If you can help I would be grateful.
I pressed overide switch in kitchen in hope it would come on. But now worried because the red button is flashing. Think it was before though. Anyone know what to do to stop it?
That’s sounds like the RF version if it works I wouldn’t worry…if it doesn’t then you may need to rebind
This thing confusing as hell,and I not know if I'm doing something wrong ,or it not working properly I can't set any pm times
I’m not 100% with out it being in front. But the biggest cause I’ve seen of this is people setting Pm at the start of the day. Instead of AM then everything too bunch up to set in the evenings
How would we change start of the day
@@nathancox6249 if you use no. 1 setting as AM set to 9.00am the the next set back temp as 9.am that’s the first castle top notch, the no. 2 set,say 1pm the the set back time also at 1pm then save the last notch to just. Come on your PM time settings you desire. Although why you wouldn’t want your heating on in the day I don’t know 🤷🏻♂️🙂
How do I just set it to boost
Just turn the dial up and it will override until it's next change time… no 1hr button on it
Hi
The heating was working but not anymore
How do I get it back on? Not really sure how to make this work.
I put it on the eco mode and it worked for a shirt while then stopped working. Now nothing works
Turn it on at the side switch, if a flame symbol appears the stats on. If you hear a small click within the stat, then the chances are it’s working, maybe the Zone valve on the system rather than the stat itself. Think it’s time to get someone in for that. Good luck
Great video that explains how to use this thermostat . The written instructions don't explain how to use it very well at all. Overall I would never by another Neomitis thermostat again. They are overly complicated and rubbish.
@@gamecubeon1187 unfortunately as thermostats play a key roll in saving energy a lot are far more complicated than this one, some out there even I have to scratch my head.. once you have it set you will probably only use the dial.. good luck
Quite good tutorial,but say like just want heating come in between 9 pm and 10 pm very day how program,maybe if you showed something like that be easier to follow
Just keep the first two times am but set them the same time.. save the last two for PM
Also the time on the thermostat does not match the actual time
How come my screen wont come on its just blank with a battery sign in the corner cant get nothink to come up can any one help
Heating still works just screen blank
Change the batteries
It was really complicated, it should be pretty simple to use the thermostat
This is one of the more users friendly programmable thermostats out there too
@@GHancock the others must be really bad!
This thermostat is very complicated to understand.I dont reccommend it.Sorry but I thought you went through it all too fast.Im none the wiser.
Dont even know how to just turn it on in kitchen. Wish Id kept my old boiler.hate it.
Just turn the dial, it should come on hopefully...This thermostat is one of the more simple room programmable stats. But I know you preferred a simple dial but this can save you a bit more energy hopefully, good luck with it
Mine just keeps coming on its eating my gas
Set the lower temp lower.. the slider on the side also will turn it off so you can test that there is no other issue ie zone valve’s sticking open
Hello
Right - clear as mud! Terrible instructions
Well, I tried to help people, I’m not paid for it. I wish more people did videos of thermostats. To help each other Thanks for the feed back.
I just got this piece of junk installed in my home. My old one simply had and on and off switch, this one shoves a billion different options that make no sense in your face. Whats even more funny is the guy that installed it barely knew how to use it. He just said spin the dial thingy lolol..
You could just flick it onto on at the side permanently and turn it up and down… but I’d give it a try first.. but remember if you have a clock as well flick that on 24hrs. Or you could have two things trying to turn off and on
@@GHancock Yeah thanks man.. I've actually figured it out now, for some reason I wasn't getting it.. You have to have the manual temperature to be set higher than the larger temp on the screen for it to actually turn it on. I think it's pretty simple now.. Thanks.
I made this video for my customers to help them set the stat… most programmable room stats are over complicated, this one is lot more straight forward that a lot out there, believe it or not🙂
@@GHancock Yeah but the one I had before, you literally just flicked a switch and it turned on.. Guess all these fancy new feature put me off at first, I'm starting to get it though now. :) But yes, your video is very helpful, thanks.