How to Replace Fuel Pump 2007-17 Jeep Wrangler
Вставка
- Опубліковано 23 сер 2024
- Buy Now!
New Electric Fuel Pump from 1AAuto.com 1aau.to/ia/1AFP...
Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need. This video shows you how to install a new TRQ fuel pump with integrated sending unit in your 2007-17 Jeep Wrangler.
• Check here for more videos on the 2006-18 Jeep Wrangler: • Jeep Wrangler 2007-201...
This process should be similar on the following vehicles:
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler
Tools you will need:
• Pocket Screwdriver
• 18mm Socket 1aau.to/ofg/1AX...
• Needle nose pliers 1aau.to/obG/1AX...
• Needle nose pliers 1aau.to/obG/1AX...
• Torque Wrench 1aau.to/ohj/1AX...
• Pick 1aau.to/ocp/1AX...
Subscribe: / @trq
Check out our playlist:
Jeep Wrangler 2007-2018 3rd Generation JK: • Jeep Wrangler 2007-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Good video...thanks! Two comments would be to clean the outside of the tank before breaking into it and replace the old dirty strainer. That can lead to lower fuel pressure.
You would think these highly paid engineers who design vehicles would be able to come up with a simpler way to change a fuel pump. I sure miss the old says of the mechanical fuel pumps. Changed one of the side of the road in 15 minutes once.
Did this in my driveway took 8 hours
They do it for the highly paid repair shops.
This is a great video - but, you didn't show the hard part - how do you seat the pump enough to get the ring on? I have almost a 1/8" gap after the pump spring fully engages and bottoms out.
I will go ahead and give this a thumbs up
My OEM pump didn't have the long feed tube along the bottom. 2008 Unlimited Sahara
That is not the correct way to disconnect the fuel line connector at 1:30. He got the first part correct at 1:11. Remove the red clip by hand by opening the tiny tabs sticking out. Once that red clip is off, PUSH IN on the half round part of the moveable retainer. You'll see the legs spread out. Then while holding the half round clip depressed, pull the line apart. Don't force it. It should come apart easily if the clip is depressed enought.
Is the fuel filter connected to the sending unit?
How did you diagnose the problem and realize the fuel pump was faulty?
When you turn on the ignition you should be able to hear the fuel pump priming, if you're not hearing anything check your fuel pump fuse. If you can't hear your pump and your fuse isn't blown, remove the segment of the fuel line on top of the engine with the two quick releases on it. Stick a fuel pressure gauge between the two open lines using a t-adapter and regular tubing. Turn on the ignition and if you have 0 pressure you can be pretty confident your fuel pump is bad. You can also take a multimeter directly to the wiring on your fuel pump to see if you're getting voltage. Hope this helps.
Why is it that every important part I would like to see the camera angle is the worst possible? Big ass elbow in the way trying to understand the clip at 6 min mark for example. Extremely helpful when I have not worked with this type of connector before. That is the whole point of you making this video and me watching it.
what is the part number of that replacement pump? is the part number for gasoline JK wrangler and JK diesel 2.8 CRD the same? is it true that the pump the same as tj 4.0?
What if my Jeep is not starting. Can I proceed?
What IS the connector visible at 13:36 and 13:42 ??!!
don't you need to replace the filter as well ?
On the 2007-2017 Jeep Wranglers the fuel filter is a part of the fuel pump assembly. Unlike most cars, with the JK models the fuel filter is an unserviceable part (to the best of my understanding).
Why do you remove the fuse ?
To depressurize the system. in case the fuel pump is working you won't get sprayed with fuel if there is any still in the lines
I could not follow this at all.
Is it possible to do this in the driveway with only jackstands my jeep has a 1 inch body lift