Bro this build was one of my favorites and the finale showing the jeep’s capabilities did not disappoint. This was definitely one of UA-cam‘s hidden gems. Thank you so much for your creativity and hardwork👏
Outstanding! I'm super impressed with its hill-climbing ability! Put a hitch on it, and build a mini-trailer for it. I'm sure it can't handle much weight, but it would be cool.
I really enjoyed this build series. The mini Jeep turned out amazing I think. I also love your sense of tidiness and attention to detail. Keep the build vids coming... Hälsningar från Sverige!
just a thought i would make a long leather and spondge pad for the top of your windscreen frame because if you get thrown forward and down you wont break your face on it. Especially as your face is above it. As it would ruin your whole day or you passangers. food for thought. What a well built little stronge beast of delight. Well done mate im very jealous. She really is built like a tank or a tractor lol
Just get you a GM 1 wire alternator.. Build a bracket an put it on.. I did that to one of my lawn tractors. be SURE you get one with a reversed Fan.. Put a pulley on the front of the motor and you can run All kind of stuff.. just DON'T use the charging system from the motor !! Run Everything from the Battery !!!
Idling an air cooled engine will kill it 2 ways. 1 - not enough air flow. 2 - lack of lube up top. That's a super cool Jeep. You're a real professional!!
Love it mate, love it. We've been waiting for this and you didn't disappoint 🙌 Absolute torque monster! Questions.. What does it weigh now all in? Whats the top speed in high ratio? Are you going to refit the locker? We've just stripped ours down to the chassis and prepping for paint, cant wait to get to this stage.. Well done fella! Now get on with the bike and the LS engine 😊 👍
Yes its more than strong enough! The weight I think its about 400kg Top speed in high range its about 65kmh and uphill about 35kmh its enough in this little homemade rigg, the locker do I not want to reinstall because its to noisy.. I just welded the rear one, I have more diffs laying so I can maki it open again if I want :D then you guys are soon finish! just the final left! can't wait to see it, yours look just like a real jeep impressed over the details! yes now I have to keep up with the editing of the videos! :D
@vassdalencustom8689 I hope this isn't the last we'll see of the mini jeep! 400kg sees a little under estimated? Ours has just the 250 quad engine and gearbox plus transfer case and it weighs in at a hefty 565.5kg !! Keep it up.. 😊👍
Thank you! then its a good idea to start! :D buy a welder and start looking on how to videos on UA-cam and start building some simple projects and take it from there :) if you want to build one like this start looking at part 1 of this build :D
This is everything those 250cc mini jeeps on Ali Express wish they were.
They are actually 125cc lol
Thank you, Yes I wanted one of those but wanted one with 4x4 and some more quality :)
Finally a non-US fabrication channel that is worth watching !! Hope it will grow!! 🎉
Thank you! hope so :D
Bro this build was one of my favorites and the finale showing the jeep’s capabilities did not disappoint. This was definitely one of UA-cam‘s hidden gems. Thank you so much for your creativity and hardwork👏
Thank you 😄👏🏻 comments like this make it wort it 🤠
Outstanding! I'm super impressed with its hill-climbing ability!
Put a hitch on it, and build a mini-trailer for it. I'm sure it can't handle much weight, but it would be cool.
Thank you :) yes it works good, in low range it can pull about annything!
What every mini chinese jeep aspires to be, well done!
Thank you 😄
Excellent!!!
Love this build!
So good 😎 can't wait to watch the next video with more wheeling around the bush, rocks whatever!
Very nice cool little jeep. Nice job
I really enjoyed this build series. The mini Jeep turned out amazing I think. I also love your sense of tidiness and attention to detail. Keep the build vids coming... Hälsningar från Sverige!
Thank you! ja det har vert et tidkrevende prosjekt! håper det blir et fremtidig (Barnfind) Gøy med positive tilbakemeldinger :D
I enjoyed this build. Great job love the way it performs. Looking forward to what's next.
Thank you! :D yes it was an success!
The coolest mini jeep online! Man I don't know why this thing isn't blowing up across UA-cam yet 😲
Thank you :D yea that have been something!
This! This is WHY I love UA-cam!!!! Fantastisk!
Takk! Gøy med positive kommentarer :D
Just needs lockers! Love the build man!
looks like it already has rear lockers ... ?!
@willywitzig9273 ya I can't remember it's been so long ago, I definitely saw the front lacking!
Thank you! yes definitely! I got the rear welded but arb lockers had been the best but expensive!
Absolutely amazing build from start to finish. Im a new viewer and just did a speed run through your mini jeep build.
Great series. Well worth my time watching. The jeep turned out great.
Thank you :D glad you like it!
just a thought i would make a long leather and spondge pad for the top of your windscreen frame because if you get thrown forward and down you wont break your face on it. Especially as your face is above it. As it would ruin your whole day or you passangers. food for thought. What a well built little stronge beast of delight. Well done mate im very jealous. She really is built like a tank or a tractor lol
Thank you 😄👏🏻 there is no fun without risk 😆
Süper olmuş hayalimdeki arac
I found the problem, it was the voltage regulator, bought a new one and works like it suppose to now :D
Next stop: Moab!
I was thinking the same thing! Patreon?
That is a really cool rig man.
Thank you :D
Great build, I've been following the series since the beginning. I recommend buying a microphone. Keep making us happy with videos like this.
Thank you 😄 i will look on a better microphone setup 👏🏻
Helt rått! Æ treng itj terapi, æ treng mer sånne episoda av vassdalencustom!
Haha bra det finnes flere som innterieserer seg for sånt! da vet man at man ikke er blitt alt for sær :D
Kvalitet fra start te slutt 😄
Takk! :D
Just get you a GM 1 wire alternator.. Build a bracket an put it on.. I did that to one of my lawn tractors. be SURE you get one with a reversed Fan.. Put a pulley on the front of the motor and you can run All kind of stuff.. just DON'T use the charging system from the motor !! Run Everything from the Battery !!!
Idling an air cooled engine will kill it 2 ways. 1 - not enough air flow. 2 - lack of lube up top.
That's a super cool Jeep. You're a real professional!!
Thank you :D its not running so low at idle anymore :) I added a atv carb on it to get rid of ruff running in the terrain :D
That is a beast, better than any chinese ATV! Very good job! You should make ice chains on the wheels. Then it can reach the moon😂
Thank you! yes the purpose of the build was to make something that would last :D Yes it has strikes my mind we will see :)
Fungerar fantastiskt bra.
Ja fungerer over all forventning med tanke på at den drives av en gressklipper :D
That's awesome, dude. I wish I had one
Thank you :D just start building your own :D
Excellent build!!! Could probably drop the air pressure in the tires...
Thank you :D yes I have tried that work a lot better in the terrain! but its getting a lot slower uphill in high range running around on the farm :)
Love it mate, love it. We've been waiting for this and you didn't disappoint 🙌
Absolute torque monster!
Questions..
What does it weigh now all in?
Whats the top speed in high ratio?
Are you going to refit the locker?
We've just stripped ours down to the chassis and prepping for paint, cant wait to get to this stage..
Well done fella!
Now get on with the bike and the LS engine 😊 👍
Yes its more than strong enough! The weight I think its about 400kg Top speed in high range its about 65kmh and uphill about 35kmh its enough in this little homemade rigg, the locker do I not want to reinstall because its to noisy.. I just welded the rear one, I have more diffs laying so I can maki it open again if I want :D then you guys are soon finish! just the final left! can't wait to see it, yours look just like a real jeep impressed over the details! yes now I have to keep up with the editing of the videos! :D
@vassdalencustom8689
I hope this isn't the last we'll see of the mini jeep!
400kg sees a little under estimated? Ours has just the 250 quad engine and gearbox plus transfer case and it weighs in at a hefty 565.5kg !!
Keep it up.. 😊👍
If you were gonna sell it what price?
I believe the value would be probably $5,000?
but: will it make it to moab?
Moab? is that a offroad event over there? :D
Is the driver's front tire being driven? Is it an open diff up there?
Yes all tires has power but the front diff is open :)
nice why don,t you get a patend and sell your idea as a project form people to do.
Norsk??
Stemmer 👍🏻
Kjempefint
Takk :D
Impressive build 👍
Thank you 😄👏🏻
Needs the Star on the hood !!
Yes I know :D and some more army equipment
This is amazing I have never welding anything before but I want to build this so bad! Do you offer plans?
Thank you! then its a good idea to start! :D buy a welder and start looking on how to videos on UA-cam and start building some simple projects and take it from there :) if you want to build one like this start looking at part 1 of this build :D
That jeep deserves Moab and @c90adventures
Thank you! :D Moab?