Not sure if you fixed it yet but it’s the power controller that plugs into the IPC btw Atlanta Speedometer rebuilds it with a warranty for about $200 that includes shipping then you will be able to press the buttons on the DIC. I had that issue when I first bought my C5. It’s very common
Wheel looks great! Sucks ur wheel didn't come off easy. They can be a real PITA to remove. When I installed my Sparco wheel the stock wheel came off really easy, I was sooo happy lol. Complete install took about an hour and half. As far as ur dic button issue, most of the time the switch isnt bad its the motherboard of the ipc thats bad. Just make sure none of the buttons are stuck as that will also cause the other buttons not to work.
Hey brother, you sprayed pb blaster on the center bolt threads from the back and the front to pull it off? Also the airbag light never came back? I’m trying to keep the light off when I go to install
Pb blast the shaft after you remove the nut. You have to put a resistor in the airbag plug to keep the light off. You can But them on Amazon or just build your own.
Damn, lot of work to swap out the steering wheel!!! I’d like the same wheel for my C5, it’s Torch Red like yours
It was a good upgrade!
Wheel looks great. There's always two answers when asking people how it was to remove the wheel... either very simple or a PITA lol.
Yeah, I usually fall into the PITA category.. the whee, adjusting the lowering bolts etc.. haha
Not sure if you fixed it yet but it’s the power controller that plugs into the IPC btw Atlanta Speedometer rebuilds it with a warranty for about $200 that includes shipping then you will be able to press the buttons on the DIC. I had that issue when I first bought my C5. It’s very common
Cool. I gotta fix my dead gauge cluster this heck’s helps me out. Maybe I’ll change my wheel as well while I’m in the process
Thank you for the video. What was the resistor value that you added to keep the airbag light off?
2ohm worked for me
Is that the steering wheel bolt still in place?
It was loose all the way to the end. (To stop me from punching myself in the face with the steering wheel when it comes loose)
Without a spacer how was the clearance from wheel to turn signal stalk? Or did thst wheel have some dish to it?
Wheel has some dish. I had no interference
Put a momo flat bottom steering wheel on my C5. It looks great. Best of all. The handling is outstanding
2ohm worked for me
Wheel looks great! Sucks ur wheel didn't come off easy. They can be a real PITA to remove. When I installed my Sparco wheel the stock wheel came off really easy, I was sooo happy lol. Complete install took about an hour and half. As far as ur dic button issue, most of the time the switch isnt bad its the motherboard of the ipc thats bad. Just make sure none of the buttons are stuck as that will also cause the other buttons not to work.
Thanks! Yeah I was taking a chance on the Buttons.. no dice.
Hey brother, you sprayed pb blaster on the center bolt threads from the back and the front to pull it off?
Also the airbag light never came back? I’m trying to keep the light off when I go to install
Pb blast the shaft after you remove the nut. You have to put a resistor in the airbag plug to keep the light off. You can
But them on Amazon or just build your own.
It’s the worst when you do a bunch of extra work and the issue isn’t solved... ugggh
Found it
Didn't show hard part people are looking for because of swearing lol so many children must be building corvettes these days
Haha! My nephew is my biggest fan.. haha. At least I explained what i did.. haha