Does it require more oil? I like the transparent cover; you can see if your adjuster nut is backing off (which I just had happen on a camping trip). If I would have known 100% that, that was the problem, I would have fixed it on location instead of riding without a clutch for the last 2 days!😬😆
@@lucasreyes_montanez2715 Yep, you can just put a vacuum line plug on the open end, or get a different 2-barb connector that deletes that third connection point in the line. 👍🏼
The kick start seal is included in bottom end gasket kits but you will need to check the OEM parts diagram to get the seal by itself. You can check the OEM parts here: www.rockymountainatvmc.com/oem-parts/Yamaha The part number you're looking for should be Part# 93102-20484-00.
I just got a stock banshee and it is almost my dream bike but it still needes a +6sway arm if my banshee is stock will it make enough power to run one? If not can some one tell me how much power I need to run one
You can run a +6 swingarm on a stock engine, you’re just not going to wheelie, and lose some handling if you ride tight trails. Unless you’re drag racing, I would just leave it stock. I run a +8 on my 421 cub, but I’m making 90+ hp and I drag race, so it benefits me to have one so it won’t wheelie at the launch.
Do a video on how to install the trail tech for the banshee step by step plz
Great video, best quad made!
Your videos are really cool Good ideas to add to my banshee
Hello friend, if I put the new lock up it, it is necessary to modify my pancake with the longest adjustment screw.???
Hello friend, if I put the new lockup on it, it is necessary to modify my pancake with the longest adjustment screw.
Why didn’t you install the billet water pump?
How much oil does it take ?
Did this mod and something along my clutch is broken or Stuck to where no matter what gear I’m in my banshee acts as if I’m pulling in the clutch
Question: cant you just put stronger springs on the clutch istead of that piece?
What kind of carburetor do you have on the banshee in the video, thank you!
We have Lectron carburetors on this Banshee. You can check out the full build video we did on it here: ua-cam.com/video/GxU23uACfDU/v-deo.html
Nice video, I need one for my 421
Project Shop Fl did you get installed?
Does it require more oil? I like the transparent cover; you can see if your adjuster nut is backing off (which I just had happen on a camping trip). If I would have known 100% that, that was the problem, I would have fixed it on location instead of riding without a clutch for the last 2 days!😬😆
did you find out?
How much oil should be used when changing this cover?
@@deadpresident_ Nope!
@@geopioneergsxr5357 i had found the amount of oil needed for the extended cover somewhere but can’t remember how much or find the link
Mine adjuster in the clutch loosen too the other day damn it. Lol
Where can I get a matching case for the opposite side ?
When add the lock out do u add more oil or just put the normal
We used two quarts of oil.
@@rmatvmc so do want oil spinning on the lock out cuz i was told just put 1 and it looks empty
@@rmatvmc also for an 04 yfz 450
What did you do with the air breather hose that was installed on the stock clutch cover?
The Modquad Lockout Clutch kit deletes the stock breather hose.
@@rmatvmc oh ok im not sure what it is called but what should I do to the part where that hose connects to, just plug it?
@@lucasreyes_montanez2715 Yep, you can just put a vacuum line plug on the open end, or get a different 2-barb connector that deletes that third connection point in the line. 👍🏼
@@rmatvmc sounds good thanks!
Where is the kick starter seal from I couldn’t find it on your guy’s website
The kick start seal is included in bottom end gasket kits but you will need to check the OEM parts diagram to get the seal by itself. You can check the OEM parts here: www.rockymountainatvmc.com/oem-parts/Yamaha
The part number you're looking for should be Part# 93102-20484-00.
Can you install that clutch cover without the clutch lockout?
You certainly can!
@@rmatvmc awesome thanks
Does the lock out allow you to shift without the clutch at high rpm?
No, you need an override transmission for that. The lockout just helps with clutch slip on higher hp setups, especially if you’re drag racing.
I just got a stock banshee and it is almost my dream bike but it still needes a +6sway arm if my banshee is stock will it make enough power to run one? If not can some one tell me how much power I need to run one
You can run a +6 swingarm on a stock engine, you’re just not going to wheelie, and lose some handling if you ride tight trails. Unless you’re drag racing, I would just leave it stock. I run a +8 on my 421 cub, but I’m making 90+ hp and I drag race, so it benefits me to have one so it won’t wheelie at the launch.
Can anybody tell me if I can do this on a Honda 450r dirtbike ???
The Modquad Lockout Clutch Cover set is only designed for Yamaha Banshee's.
Best thing to do is sell the shitty 4 stroke and buy a banshee
@@1991tommygun lmfao!!!!😂😂