Projection of Lines_Level 1_Problem 1
Вставка
- Опубліковано 9 вер 2024
- Download the Manas Patnaik app now: cwcll.on-app.i... A line 50 mm long is inclined at 45o to the VP & parallel to the HP. The nearest end of the line is 25 mm in front of the VP. Draw the projections of the line if it is 40 mm above the HP.
My Affiliate Links:
My Samson Go Mic: amzn.to/2xgE0qR
My Wacom Writing Tab: amzn.to/2xh8FEv
Books I refer: amzn.to/2xe550a
amzn.to/2xgbJ3E
amzn.to/2jJOMmf
Thank you from USA..Had descriptive Geometry 50 years ago in the USA,although in 3rd angle and change of position method..You're an excellent teacher sir and I'm really enjoying your presentations..............
I solved my all doubts with your help...today my sessional exam of eg..and I prepared projection of lines by your lecture...thank u sir....
Thanks sir your way of explaining makes it more easy
A line AB contains a point C on it such that the ratio of the distance
of the CB:AC is 2:1. The end A is 20 mm above H.P. and it is in 1st
quadrant. And the other end B is in V.P. The point C is 35 mm
above H.P. The line is inclined with the H.P. at an angle 30°. The
elevation length of the line AB is 70 mm. Draw the projections of
the line AB.
May my teachers were like you! Your explanation clear my all doubts. Thank you so much.
Thanks for appreciating my work Rahul........
There are whole lot of projects i am working on right now....
So consider subscribing and do let your friends know about this channel so that they can also benefit...All the best.....
sir your explanations are very nice. I clear my doughts with your videos thank u
Thanks Suresh for the appreciation
All the best...
And do let your friends know about this channel so that you all can benefit...
Whoever you are , ily
In love wid ur videos.
Lucid explanation and very nice pictorial representations👍👌
Thanks for appreciating my work Vishal........
There are whole lot of projects i am working on right now....
So consider subscribing and do let your friends know about this channel so that they can also benefit...All the best.....
Sir! you have to mention the dimensions of distance that above and below of reference line
Thank you so much sir
thank u sir your videos are helping me and my frnds alot
Hi Chindam....
I am sure that these videos are helping u learn...
Keep watching and do let your friends know about this channel so that they can also benefit.......
Sir thanks your explanation is help me....to learning ed...very easily.
Awesome channel sir,awesome presentation,and I appreciate the way you reply commenters👌👌👌
Hi Ram....
I am sure this is helping u learn....
All the best in life.....
front view of a line , inclined 30° to the VP is 65mm long .Draw the projections of the line ,when it is parallel to and 40mm above the HP, its one end being 30mm infront of the VP. ##sir I have a doubt in this question
You're a godsend sir! Love your videos.
All the best
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Engineering Drawing/Graphics (Hindi): ua-cam.com/video/SB83cUaAiCM/v-deo.html
3. Engineering Mechanics / Applied Mechanics: ua-cam.com/video/Z4WN2Z9okfs/v-deo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
5. Theory of Machines: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
6. Machine Drawing: ua-cam.com/video/iFCnFUR9Gdc/v-deo.html
7. Engineering Drawing for Engineering Services Prelims: ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: ua-cam.com/video/0fejUC79LZY/v-deo.html
9. Manas Speaks Series: ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
Sir if line lying in vp and inclined to hp what happens
Thanks a lot sir 🙏🙏🙏
Super explanation sir
videos are really helpfull and also help us in auto CAD too
amazing video sirji. Thank you sooooo much : )
If the line is 45 degrees inclined to VP then why the projection is parallel to VP?
Thank you so much sir ...Your videos have equally helped me in clearing my critical graphics subject .
So blessed
You are doing a great job sir !
Respect
Thank you sir
such a beautiful explination sir
U helped me a lot thanku sir
All the best.
1. Engineering Drawing (English) :
ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing (Hindi) :
ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics:
ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Mechanics of Solids:
ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines:
ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. Machine Drawing:
ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
7. Engineering Services Examination_Engineering Drawing_Prelims:
ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11:
ua-cam.com/play/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM.html
9. Manas Speaks Series:
ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Physics Channel Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
My AMAZON Store - For all you students.
www.amazon.in/shop/manaspatnaik
What does end projectors mean??? N are auxiliary plane n profile plane d same????
i didn't understand the front view. how will it be 65mm? the angle is increasing from 30 if we put a' b' legth 65 mm.
Sir I understood the concept n I'm able to solve if all d information is given but some of d questions which do not have complete information, I mean d trickey ones, I'm not able to solve them
thanks sirjii what can i say its really helping me to learn ed easily thanks for efforts
Thanks Aditya for appreciating my work....
Hope that u enjoyed and learned a lot from this...
All the best.....
And.Do recommend this channel to your friends also, so that all can learn Engineering Drawing in the best possible way....
Thank u sir jii
Great sir your lectures of eg are very helpful for my exam
So thankful to you sir
Thank you sir for explaining ED
Hi Shubham....
Keep learning and do let your friends know about this channel so that they can also benefit...
All the best.....
Super explanation
Sir, while solving questions in exam is we have to make pictorial views of a problem
or not
U are really doing an amazing job man!!!!! Thank You
fabalous classes
In the fv we have reduced length is it right??
A points s is 55 mm below hp and 75 mm infornt of vp draw its projections
In tha sam answer solu ga
Thank you 😊👍 sir
Welcome 👍
😀Do share this channel and its playlist with your friends.
1. Engineering Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Mechanics Playlist (OLD): ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
3. Engineering Mechanics Playlist (NEW 2023-2024): ua-cam.com/play/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP.html
4. Mechanics of Solids Playlist: ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines / KOM / DOM Playlist: ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. AUTOCAD Playlist:
ua-cam.com/play/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G.html
7. Machine Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics.
Second Channel for Hindi Audience: @btechplus
Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc
Thank u sir for this great job... Its really very usefull for us..
Sir where is the 40 mm height from the HP
good sir'
Can you tell which pencil use either H or 2 H
Sir.... could you explain with mine drafter
Really nice
Hi Mohit.....
Thanks for appreciating...
And do spread a word about this channel with your friends, classmates and juniors so that all can benefit.
yea sir sure
If angle is not given, how can we draw same problem?
This question assumes that angle is given
sir, which software you are using to plot lines?
AutoCAD
HP is a' and VP is a I think
Thank you @Manas Patnaik!! Absolutely the perfect tutorial!!
Thanks Tejaswati....
By the way, these are my old videos on projection of lines. You can access the new one from the list below:
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Projection of Point: ua-cam.com/video/fK4h5gM73w8/v-deo.html
3. Projection of Line:
OLD:
ua-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
NEW:
ua-cam.com/video/pzE0D-Ijxd4/v-deo.html
4. Projection of Plane: ua-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5. Projection of Solid: ua-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6. Section of Solid: ua-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7. Development of Surface: ua-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8. Auxiliary Plane: ua-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9. Interpenetration of Solids: ua-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10. Isometric Drawings: ua-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11. Conic Sections: ua-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12. Cycloidal Curves: ua-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13. Involute:
ua-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14. Plain Scale and Diagonal Scale: ua-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15. Complete Engineering Drawing in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: ua-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2. Projection of Point in Hindi: ua-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3. Projection of Line in Hindi: ua-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4. Projection of Plane in Hindi: ua-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5. Projection of Solid in Hindi: ua-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
6. Scales Hindi-Urdu:
ua-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
ua-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html
2. Friction:
ua-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html
3. Shear Force and Bending Moment: ua-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html
4. Trusses:
ua-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html
5. Centroid and Centre of Gravity: ua-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html
6. Moment of Inertia:
ua-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html
7. Dynamics:
ua-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
Don't complialcate things
Sir I am studying mechanical engineering 1st year it is good learn auto cad from first on wards pls tell me....
Sir I can understand how to keep the distances dA and hB
sir can u send me sution of the following questions bcz this types of problems are not included in Ur videos so pls help me to get the solution of these questions
1.the projection of a line PQ measures 80mm in the T.V and 70mm in the F.V.The midpoint of the line is 45mm in front of V.P. and 35mm above H.P.End P is 10 mm in front of V.P. and nearer to it.The other end is nearer to H.P. Draw projections of the ki e,find the true length and true inclinations.(may-2012 mu)
556
Thank you so much bhayya
All the best.
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Engineering Drawing/Graphics (Hindi): ua-cam.com/video/SB83cUaAiCM/v-deo.html
3. Engineering Mechanics / Applied Mechanics: ua-cam.com/video/Z4WN2Z9okfs/v-deo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
5. Theory of Machines: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
6. Machine Drawing: ua-cam.com/video/iFCnFUR9Gdc/v-deo.html
7. Engineering Drawing for Engineering Services Prelims: ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: ua-cam.com/video/0fejUC79LZY/v-deo.html
9. Manas Speaks Series: ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
bsss i like all.of ur videos and ive give them good replys but this was some unatisfactory im sorry
Dont be sorry....
Its ok....I am happy to take the criticism........
Haldia institute waalo attendance lagaao😂
Sir Hindi me bhi dal do
Adarsh....Hindi channel will be launched this Diwali.....
Thanks sir
thank you sir
PROJECTION OF LINE | RELOADED | BEST ANIMATIONS: ua-cam.com/play/PLIhUrsYr8yHwEyvIlxf4EDsfoStqk2JMu.html
Thank You sir