I cant say enough about podium archery, just got back into my archery game and over the past couple of weeks I have placed quite a few orders with them and shipping has been super fast, just ordered my press through them a few days ago and came home to it sitting on my porch today . He does stand behind anything over $100 is free shipping, any questions you have when you call the shop they have the answers you need, If you are into archery , I would highly recommend getting to know podium archery !!!
Easton came out with their new 4mm match grade half outs, which have a center pin. Basically, they accomplish the same thing these do. However, this new podium system is titanium, which is arguably stronger.
Can you possibly make a video about making the tip of the arrow like inserts and collars maybe a bit of a difference on what to look for and what results you will get from different components maybe
I mean, the Valkyrie system is pretty bulletproof, and you can get a center pin outsert that's 20-22 gr and a 100 gr point if you're looking for a lighter weight up front. But then you have to use Valkyrie points and broadheads, which are pretty awesome. This new system is probably the best for being able to use any broadhead or point you want. They're not any lighter, but Eastons' new 4mm match grade half outs essentially accomplish the same thing with a center pin/ collar.
I’ll buy a dozen of each thanks MFJJ! Actually I wish you would’ve showed me these a few weeks ago I just bought a dozen px10 easton parallel arrows with the 100grain easton titanium inserts but they’re nice though.
Hey JJ, just thought I'd throw this idea at you. Instead of a torch or that slow heat gun, try making an induction coil. Little experimenting on voltage and amperage levels and you could get it set up to put that insert in there for 3 seconds and be perfect heat for the glue. Just a thought. Probably not something the DIY archer would want to fool with but most definitely something for you for when you get orders for finished setups
Got a video idea, testing different styles of broad-heads, Fixed and mechanical in ballistic gel and seeing the different characteristics and what happens in the wound channel.
Any thoughts on using that hot melt for hit insert in a 5mm .204 arrow then a collar. Looking at ironwills setup due to overall weight I'm looking for. But love being able to get back components.
I cant say enough about podium archery, just got back into my archery game and over the past couple of weeks I have placed quite a few orders with them and shipping has been super fast, just ordered my press through them a few days ago and came home to it sitting on my porch today . He does stand behind anything over $100 is free shipping, any questions you have when you call the shop they have the answers you need, If you are into archery , I would highly recommend getting to know podium archery !!!
Need to get my hands on 6 of these. Thanks for the in depth review.
Liking the new components that you are coming out with!
Thank you so much for making this and the insert it’s self amazing
Nice design improvement. I think I will give these a try.
Great looking product!!!
Great content, you are the archery genius, I say no more,God bless
Thank you. Appreciate your content
I’ve been waiting for you to come out with a better system than the Easton half outs. Glad they’re out now!
Hands-down, the best system out there for a 4 mm👌
Just ordered 12! THANKS! I even called easton and spoke to an engineer asking why they didn't make these! Thanks!
Easton came out with their new 4mm match grade half outs, which have a center pin. Basically, they accomplish the same thing these do. However, this new podium system is titanium, which is arguably stronger.
already bought some for my x impacts. They are slick!!
Best components on the market through and through
Now I would buy that system. And somewhere in this video you changed shirts
Thank you for sharing this great information
God's Blessings
I’m a fan of the titanium 204 stuff they introduced last year
That's a nice system it will work for my easton fmjs but my other arrows are .165 it looks good though
Hopefully these stay in stock I know every time I looked at your other Ti outserts they were always sold out!
Mine will here Saturday
Can you possibly make a video about making the tip of the arrow like inserts and collars maybe a bit of a difference on what to look for and what results you will get from different components maybe
I mean, the Valkyrie system is pretty bulletproof, and you can get a center pin outsert that's 20-22 gr and a 100 gr point if you're looking for a lighter weight up front. But then you have to use Valkyrie points and broadheads, which are pretty awesome. This new system is probably the best for being able to use any broadhead or point you want. They're not any lighter, but Eastons' new 4mm match grade half outs essentially accomplish the same thing with a center pin/ collar.
Completely agree. I’m running Valkyrie… but if I wanted to shoot a different BH this is exactly what I would want.
I’ll buy a dozen of each thanks MFJJ!
Actually I wish you would’ve showed me these a few weeks ago I just bought a dozen px10 easton parallel arrows with the 100grain easton titanium inserts but they’re nice though.
Man got to get some for the vap ss
Hey JJ, just thought I'd throw this idea at you. Instead of a torch or that slow heat gun, try making an induction coil. Little experimenting on voltage and amperage levels and you could get it set up to put that insert in there for 3 seconds and be perfect heat for the glue. Just a thought. Probably not something the DIY archer would want to fool with but most definitely something for you for when you get orders for finished setups
Got a video idea, testing different styles of broad-heads, Fixed and mechanical in ballistic gel and seeing the different characteristics and what happens in the wound channel.
Candles🕯️work really well when a heat gun or torch isn’t available.
Ti for life
I need to stay away longer are not work so much to catch your videos ✌🏻👍🤷🏼♂️
When’s the draw board shipping out?
Valkyrie. This is a close second
Great video, what do you think about the idea of going peepless?
Amazing stuff, do the collars and inserts do the same for 5mm arrows?
Take my money!! Do a 75 or 100 grain for the trad guys!!
We need tips that taper to flush. Hopefully thats next lol
Finally
Any thoughts on using that hot melt for hit insert in a 5mm .204 arrow then a collar. Looking at ironwills setup due to overall weight I'm looking for. But love being able to get back components.
Any plans for a titanium 6.5/.244 insert?
Have a look at Allite Super Magnesium as a material, supposedly lighter and a bit stronger than grade 1 titanium.
What temp do you set your heat gun at? Never used hot melt before, but I think I’m sold.
Any titanium outsets for standard arrows? Then use crossbow points…
When will your hit inserts be available?
Is this similar to the two piece system on the GT Pierce LRT?
Same set up as gold tip?
So just to be clear - can the collar be bought separately for use in Deep Six?
Do you guys make the field points as well?
Very cool. I'm ordering 6-12. Check the wallet first.
So there is no sleeve that covers the shaft?
Wish you would ship to Australia =(
We do
Do they fit px10 parallel pro? If they do I’ll take a dozen.
How much do the collars weigh?
Isn’t that what goldtip did with their new components for their pierce except made in titanium???
Don’t goldtips titanium half-inserts use the same stainless sleeve adapter as their aluminum half-inserts?
Do you sell and ship international ?
What’s the diameter of your other titanium .166 inserts
Easton Sonic 6.0 stainless 50/75 insert🙏🏼
what wrong with the Easton brass ones?
@@tehype765 honestly nothing but a little more durability is always nice
B@@Jory623 can get 125 SS from Ethics.
@@the_sharp_carpenter I know
Will those accept weights in the back of the insert ?
Yes, they are setup to accept weights, the gold tip fact weights go in really nice.
Are you getting rid of your other .166 T outserts?
Nope
What is total weight of components?
60 grains
$10 each ?
At some point we just have to admit 4mil was a bust and stop trying to make it work lol
Please checkout and try firenock components. He has been making titanium stuff like this for years. He makes components for everything.