fantastic channel. I have greatly improved my vision in the construction of sketches. The curve projection examples are wonderful. Thank you for your classes😎✌💪
@@EasyCADSolutions I have solid works learned licence also. not sure if its the same version you have? what version do you use some of the buttons and settings look different
i get an error at 5:41 when i change the guide curve to "Tanagency to Face" the error says " the resulting surface cannot achieve the desired tangency, it will not be created. One or more of the specified profiles doe not meet the tangency requirements of less then 30 to the guide curve tangency face(s)" any ideas?
I use face fillet because it has an option of chord width fillet Which creates a uniform looking fillet and gives an appealing look You can use edge fillet too and it gives a kind of similar results So, always remember when the aesthetics and surface finish are more prior than always use face fillet with chord width option and fillet profile should be curvature continuous for better flow of surfaces
Огромная просьба сделать видео как сделать массив из текстуры (к примеру соты 5-6 мм) внутри чашки с закругленным дном, включая дно. На просторах интернета такого видео не нахожу. Желательно с минимальными искажениями.
@@EasyCADSolutions Приблизительный внутренний размер чаши Верхний диаметр 90-95 мм Нижний диаметр 60 - 70 мм (круглое или плоское дно, пусть будет на ваше усмотрение. Главное чтобы рисунок совпадал) Высота 60-65 мм Благодарю за отзывчивость
@@EasyCADSolutions Good afternoon. Need a texture inside the bowl, including the bottom of the bowl (I really liked the honeycomb pattern). If possible, DO NOT use a spiral cut. I can't find a tutorial video anywhere on the web. (Maybe I didn't search well). If you want on both sides, but then with a different texture. I think this video will be very long.
Hello, I follow your UA-cam channel from Uzbekistan, I have been working in Solidworks for 5 months, I can’t fix some bugs, can you send me the Solidworks file?
the best Solidworks channel on UA-cam
Thanks 🙏
I am glad to hear this 🤗
Genial, SOLIDWORKS nunca deja de sorprender. Gracias!
Welcome 🤗
fantastic channel. I have greatly improved my vision in the construction of sketches. The curve projection examples are wonderful.
Thank you for your classes😎✌💪
Welcome 🤗
And, Thanks for learning from my videos 😊
Perfect as always. I have never used the segment sketch tool before, now I will pay attention to it. Thank you!
Welcome 🤗
love the videos in this channel, a great channel to learn from. I have the inventor, can you make this type of thing in inventor?
Thanks 😊
But not sure about inventor
@@EasyCADSolutions I have solid works learned licence also. not sure if its the same version you have? what version do you use some of the buttons and settings look different
i get an error at 5:41 when i change the guide curve to "Tanagency to Face" the error says " the resulting surface cannot achieve the desired tangency, it will not be created. One or more of the specified profiles doe not meet the tangency requirements of less then 30 to the guide curve tangency face(s)" any ideas?
thanks bro
Welcome 🤗
Nice 🙂👍
How do you decide whether to use face or edge fillet? When you round over the bottom edge, would an edge fillet give different result?
I use face fillet because it has an option of chord width fillet
Which creates a uniform looking fillet and gives an appealing look
You can use edge fillet too and it gives a kind of similar results
So, always remember when the aesthetics and surface finish are more prior than always use face fillet with chord width option and fillet profile should be curvature continuous for better flow of surfaces
@@EasyCADSolutions there is always something new to learn, thanks!
Applause you man!!
Thanks 👍
fantastico 🤩🤩🤩🤩🤩
Thanks 🙏
Super 👌
Thanks 🙏
Спасибо,круто !
Thanks 🙏
Огромная просьба сделать видео как сделать массив из текстуры (к примеру соты 5-6 мм) внутри чашки с закругленным дном, включая дно. На просторах интернета такого видео не нахожу. Желательно с минимальными искажениями.
Do you have any reference images?
@@EasyCADSolutions Приблизительный внутренний размер чаши
Верхний диаметр 90-95 мм
Нижний диаметр 60 - 70 мм (круглое или плоское дно, пусть будет на ваше усмотрение. Главное чтобы рисунок совпадал)
Высота 60-65 мм
Благодарю за отзывчивость
Do you need the texture outside the bowl or inside the bowl?
I think outside is pretty good
@@EasyCADSolutions Good afternoon.
Need a texture inside the bowl, including the bottom of the bowl (I really liked the honeycomb pattern). If possible, DO NOT use a spiral cut.
I can't find a tutorial video anywhere on the web. (Maybe I didn't search well). If you want on both sides, but then with a different texture. I think this video will be very long.
I made a video on this. Maybe it is what you are looking for. ua-cam.com/video/4vPle-2jNSY/v-deo.html
Hello, I follow your UA-cam channel from Uzbekistan, I have been working in Solidworks for 5 months, I can’t fix some bugs, can you send me the Solidworks file?
This File?
RealViev Graphics It doesn't work for me
( RealViev Graphics )I can't fix it it doesn't work for me?
Okay
Sir meri shadow nhi aa rhi hai
Which shadow?
Ambient Occlusion??
,👍👍👍👍👍👍👍
👍