Picked up my Radical Forearm RF-15 last month, took it apart and oiled. I have had it at the range 3 times. No malfunctions through 3 types of mags. Fired both 223 and 5.56 with no issues. Great rifle for the price. It's my new Fun Gun. 👍
Had feeding issue with my RF-15 out the box, took it home cleaned and oiled it went back to range haven’t had any issues yet. I’ve ran brass and 75g green tips through it and it runs fantastic. Love mine. I have steal mags and p-mags
Just got out to the range yesterday and shot my Radical AR for the first time. Using the included mag and 5 magpul gen 2 mags with Winchester 55gr 5.56. Shot all 6 mags without a single malfunction. Cycled perfectly every time. I think all of the problems you had in this video was due to the lesser quality ammo. After I got my red dot zeroed in at 36 yards it was shooting groups about the size of my palm, and that's coming from a newbie in terms of shooting.
Putin's revenge, cheap shit/inferior ammo. I'm staying well away from steel case. All my AR mags are MAGPUL. I have to check the "Iron" AR sights I bought for my SW AR, but never used (has an optic on it) Not sure if they're plastic or metal, but they ARE MAGPUL. Hopefully I'll pick up my Rad AR tomorrow; it's an RPR. There's an RDR & RHR or something? I'm new to RAD's stuff, & thought the RDR or the "H" (?) model was better based on limited research. PRICE, it was on SALE, & availability were key factors. Sticking with my go to Gun Store in town, I saved the shipping & FFL fee. Still had to pay the tax to the sleazeball Governor; oh well.
113 yards yesterday with my new rf15 16in barrel , nothing but a cheap centerpoint 1-4x20 scope and I had under 1 moa . About 3/4th of an inch group at 113 yards . I outshot everybody else there with 1000-1500$ AR’s . I do have serious training under my belt as a 24 yr old , but train and practice is all you need to get my skill set . Radicals are good in my book
I had the same cycling issue when I got my rf15 I suspected a gas issue. So I swapped out the BCG and no longer has cycling issues. The issue was in fact the gas key leaking on the BCG. Contacted radical. Had a new BCG in a matter of a couple days. Haven’t had an issue since. They were very easy to work with and no questions asked sent me a new one. I’ve put about 1500 rounds through the new BCG and no issues.
I've got the same rifle. I have put around 300 to 400 rounds through it so far. Any brass ammo shoots well. No jams. Tula steel will have some failure to extract at around 80 rounds. I have not changed any internal parts. It will run fine with any mags I’ve used.
If you wanna run steel, try polishing the chamber. I had a cheap AR that was getting stuck steel cases and I polished the chamber, never had another issue.
I switched out the mag the RF15 came with for some Lancers and BOY HOWDY did it fix the problem. Zero feeding issues now. The mag RF makes is absolutely dreadful.
I just got one a few days ago. Took it home cleaned and oiled it before taking it to the range. Im glad I did because I find any signs of any kind of lubricant anywhere. It’s the first gun I have bought without any kind of oil or grease from the manufacturer.
I run M95 and M88 Brass in my Magpul Gen 2 magazines. Over 2000 rounds so far in my RA AR-15 and the only problem I've had is some bad primers in some Winchesters so... all in all a great rifle for the price (Paid $450.00) for my Radical RF 15.
Good rifle for the price. Out of the box I had failure to eject. Sent it back to Radical firearms for repair. Got it back same issue. I took it apart and found that the gas rings were over sized. Put in a a different BCG, problem solved. I did change the gas rings on their bcg, now it works properly.
This guy is a clown..... I'll run this budget build like a high end (lubed rifle) I have no idea what this person was expecting.... mil spec isn't even close to a high end rifle.... just lube it and you'll have a great weapon like the military expects...
I buy 2 of every gun that I purchase so that I can keep one brand new in box for later in life. I can't afford to find out 15 or 20 years down the road that I have a gun that doesn't shoot all brass/steel cased ammo right out of the box. This makes your review absolutely valuable because I was about to buy a couple of these and store them away. Many thanks for taking time to review brands. Subscribed.
I’m at over 3000 rounds with my RH AR15 that is carbine length gas system purchased in 2016. I shoot only brass case, and follow the recommended cleaning/maintenance. I’ve never had a failure to cycle. Great rifle, brand and QC. BTW… There was a printed note in the paperwork that warned against steel case ammo..
The RF 15 I got has a 3lb trigger :) Edit: I had the same issue with RF15 with failures to cycle. I took to the gun shop I purchased it from and they kindly fixed it for me for free since I bought it as new. Had to do some paper work for it, but it was certainly better than paying anything to fix it. After I got it fixed, it was THE BEST weapon I fired :)
Got 2 R.F.'s x39's Uppers with their heavy barrels and never had a issue with them on Anderson Lowers.... 400 bucks for complete X39 rifle n a nice Pic rail for optics......
Bought the Radical RF a few days ago. I haven’t fired it yet but found out the mag won’t “lock in” to the gun. I’ve replaced the mag. I tore the gun down to inspect and clean. It’s obviously been fired at least once. Small about of carbon on the firing pin. Bolt scratched. I’m trying to not let that bother me. Bought this new from Dunham sports. I hope it breaks in better than yours did.
I never seen this gun do that in any video or for me. Was suppressed. I run steel case bullets all the time never jammed. But when I first got it I ran brass and it never jammed then later on ran the steel.
Im pretty sure somewhere on the website or in the user manual, Radical suggests not using steel case ammo. I could be wrong and might be thinking of another gun, but generally, all my radical ever eats is M855 and occasionally 55gr .223s, (through standard-cap Pmags, steel mags, and windowed mags) and ive never had a hiccup.
I've ran steal case threw it an it was fine polylacker steal case is the best in my opinion for ar but I've only read the manual an it said no 223 rem other then that any 223 or 556 is fine as long as it's not 223 rem yr fi e from what I've learned
Ive had my RF15 for a solid year now. Its got 1k tula steel through it and 2k rounds of brass. The steel case was randomness. I could go out and shoot 150 rounds amd not have one issue, next outing it would fail to extract almost every mag. Id have to drive the case out with a claening rod. No problems from brass.
@@ms1406 my extractor was ripping the rim of the case off every time. Not sure the extractor spring would fix that. 2k rounds of pmc xtac not one problem though
How to tell anyone looking at these if you can afford better get better. I got a DPMS and a Delton almost 20 years ago and they eat steel case for breakfast I swapped the lowers back and forth with the uppers and they still function 100%.
I would 100% swap out the BCG on this rifle. From working on several radicals and owning one myself you really cant shoot steel case with the stock configuration. You may notice that there is a lot of gas coming from the bolt area, this is due to the gas key on the BCG. A lot of cheaper rifles will have this issue.
If the key is leaking you can remove it, polish it on a perfectly flat surface, put some loctite 620 sleeve retainer compound on it and re-install. Saw that trick on school of the American rifle, a great qualified gunsmith and AR armorer. His channel is great.
Just put a deposit on one myself, it was on sale for $499, with taxes $532 and that's just an incredible price I spent over $600 for my Ruger AR and that was on sale and considered a budget rifle lol, don't have any complaints on my Ruger AR except it was getting lonely so I simply had to get it a little brother 🤣😂, from all the reviews on the RADICAL FIREARMS 15DSR-M4 5.56 I think I'll be happy
I got that same model radical AR-15 the first 30 rounds out of the metal magazine I had got a few jams but after that magazine I have yet to have any malfunctions steelcase or brass
Just got an RF-15. Only around 100 - 120 rounds through it. No malfunctions running 556, BUT did experience some of these “ejecting but not feeding” issues on 2 mags of 223. I am guessing it is due to under gassing with the 223 ammo, but it would only happen on a small handful during the first 5 rounds of the mag. After that everything was fine. Just seems that either the gas doesn’t like 223 or the mag doesn’t like 223. 556 is perfect which would make sense as it is rifled in 556 NATO
Bro as soon as you said steel cased, I knew that gun wouldn't run.. it has to be set up for steel casing as the gas expansion is different. Brass is used because it expands better. Then as soon as you said you would change to brass.. I knew it run and run well because every other radical video I have seen that thing runs good. Over all, good job!
Just came across you channel, not sure why just now lol. Great video. My radical has been great. My 5.56 has been good. My 7.62 Radical actually hates brass lol
Definitely a peacock. We had neighbors that had multiple peacocks& guineas. Very loud, when ya got 3,or 4 going,🙄. Often wondered what they would taste like,🤔😉
Plus for those that don’t believe me that the steel ammo has less gunpowder, buy some brass ammo, and buy some scale and weigh them out. You’ll be shocked at the results.
Brass is heavier than steel if youre just weighing the entire cartridge And different kinds of smokeless powder require less weight to achieve a specific pressure and pressure curve 30gr of 3031 is VERY different from 30gr of 4064
I learned A LOT from the comments below and OF COURSE from this vid. I bought my RAD RPR based on positive comments. I have to revisit the different models beside the RPR. #1 reason for the misfires/jams? Cheap sh*t Rooskie bas*ar* -putin ammo. NO intentions of buying this crap. I recall ages ago firing blanks thru an M16 (real deal) when I was in the USAF, on an exercise. I'd blame the rounds not being of a consistent load, not enough gas generated to work the BCG. I was clearing jams. misfires, failure to battery, and whatever else you call it...maybe some stovepipes? We used the std. MILSPEC mags, aluminum, yes?. Could be repeating some "terms". We used the std. MILSPEC mags. What model Colt AR we had is beyond me now, but it didn't have the forward assist, SURE as HE*L needed it. Yeah, it was like firing a bolt action. But I hope it's NOT the BCG. The MAGPUL sights weren't for precision shooting? I thought you were saying that about the cheap no-name plastic sights you bought on EBAY (or Amazon?)? Do those things actually, truly, 100% perfectly fall inline w/each other? Windage? Holding the gun rock solid steady? I'm debating whether to fire mine stone cold tomorrow when I pick it up, or play nice & first take it apart, clean & lube it. If the store will "quick mount" some iron sights I have, just might go for it. Have got everything else I need. BTW. HAPPY New Year to y'all. (Happy NY to me too). Happiness is a WARM GUN.
This is my first rifle can you make a video or link a video for the best accessories to pair with the firearm. Also is it better to have 300black out or 5.56 NATO
Be wary. I bought a new Always Armed upper for my 300 blk. The Radical upper is terrible... Always Armed is a cheaper brand but far superior to the Radical upper...
@@JewTubeSux you could definitely tell it’s a cheaper rifle - buffer tube is loud and sloppy but shoots like a charm haven’t had but 1 malfunction in over 1000 rounds for overall I’d give it a 5/10 considering ALL AR choices it’s not a bad beginner one to learn with but there are 100% better options
I recommend it I have 2 they work great steel case and all but 1 I had some trouble with my bcg but it was a easy fix I think the firing pin was off spec so put another one in and it also ran great.
I have one and I love it. I shoot brass and only had one malfunction very early like less than 50 rounds in. Now it's 1000 rounds in. The Radical Firearms love grease, and the BCG and recoil spring will be happy as pigs in the mud if it's greased heavily. It runs like butter when I use Hoppes black grease, and any good gun grease will do. I might try to shoot cheaper steel cases to see if it will run those since I am past that break in period and I'll le t you know.
If this was a drinking game I would be blasted for every time he mentions his Delton DTI. I don’t think you are supposed to mention a competitive product so many times during a review. 😂
my brotha, new sub for ya here n i am a u.s. marine vet here 93' to 97' active ! n only have email here , def. wanna talk more n godspeed to our beloved 2A, thanks > tom !
I have a radical it does not shoot steel casings they’re barrels are bored out smaller than those steel casings. You can run brass threw them all day not like a AK where you can spray just about anything out of those fuckers and it’ll chew
still think i may avoid a radical. My AR started life as a dpms and has always run flawlessly.Thats all we used at the nuke plant alongside of bushmasters.
My Diamondback and ATI Milsport ( all metal ) do not like steel case ammo…I can’t use steel in those ….my Radical and Anderson have no issues ….all I buy is brass…isn’t worth the hassle
Picked up my Radical Forearm RF-15 last month, took it apart and oiled. I have had it at the range 3 times. No malfunctions through 3 types of mags. Fired both 223 and 5.56 with no issues. Great rifle for the price. It's my new Fun Gun. 👍
Same here. Steel case, reloads, 223,556 no issues. Love it
My .300 blackout keeps jamming 😢
Yours is 223? Mine is 762 interesting
@@presleyfernandez2210take apart the bcg and oil it and put sum tension on the extractor to make it loosen up
Just don't shoot Remington 223 UMC in the Radicals
Had feeding issue with my RF-15 out the box, took it home cleaned and oiled it went back to range haven’t had any issues yet. I’ve ran brass and 75g green tips through it and it runs fantastic. Love mine. I have steal mags and p-mags
I got a radical ar15 an love it great ar for the money.😎👍🏼 i use Magpul mags in mine an brass ammo had no problems
Just got out to the range yesterday and shot my Radical AR for the first time. Using the included mag and 5 magpul gen 2 mags with Winchester 55gr 5.56. Shot all 6 mags without a single malfunction. Cycled perfectly every time. I think all of the problems you had in this video was due to the lesser quality ammo. After I got my red dot zeroed in at 36 yards it was shooting groups about the size of my palm, and that's coming from a newbie in terms of shooting.
Can you tell me how much you got yours for & where you got it from?
@JP-ch3hn I got mine for 499.00 at the local hunting store about a week ago in orgeon. Mine had one cycling issue in about 90 rounds.
Had not oiled it yet and I think thay may have contributed
Agreed, I also had a malfunction with steel case ammo, but perfectly fine with brass. Took out of box and used without prior cleaning
Putin's revenge, cheap shit/inferior ammo. I'm staying well away from steel case. All my AR mags are MAGPUL. I have to check the "Iron" AR sights I bought for my SW AR, but never used (has an optic on it) Not sure if they're plastic or metal, but they ARE MAGPUL. Hopefully I'll pick up my Rad AR tomorrow; it's an RPR. There's an RDR & RHR or something? I'm new to RAD's stuff, & thought the RDR or the "H" (?) model was better based on limited research. PRICE, it was on SALE, & availability were key factors. Sticking with my go to Gun Store in town, I saved the shipping & FFL fee. Still had to pay the tax to the sleazeball Governor; oh well.
113 yards yesterday with my new rf15 16in barrel , nothing but a cheap centerpoint 1-4x20 scope and I had under 1 moa . About 3/4th of an inch group at 113 yards . I outshot everybody else there with 1000-1500$ AR’s . I do have serious training under my belt as a 24 yr old , but train and practice is all you need to get my skill set . Radicals are good in my book
I had the same cycling issue when I got my rf15 I suspected a gas issue. So I swapped out the BCG and no longer has cycling issues. The issue was in fact the gas key leaking on the BCG. Contacted radical. Had a new BCG in a matter of a couple days. Haven’t had an issue since. They were very easy to work with and no questions asked sent me a new one. I’ve put about 1500 rounds through the new BCG and no issues.
I've got the same rifle. I have put around 300 to 400 rounds through it so far. Any brass ammo shoots well. No jams. Tula steel will have some failure to extract at around 80 rounds. I have not changed any internal parts. It will run fine with any mags I’ve used.
If you wanna run steel, try polishing the chamber. I had a cheap AR that was getting stuck steel cases and I polished the chamber, never had another issue.
I have a RF-15, it’s definitely the ammo your using, Russian steel did the same for me, after several hundred rounds it would fire fine with anything
My very first rifle , it turn out to be the RF15 , I really enjoy it, working perfect. Thanks for the video.
I switched out the mag the RF15 came with for some Lancers and BOY HOWDY did it fix the problem. Zero feeding issues now. The mag RF makes is absolutely dreadful.
I just got one a few days ago. Took it home cleaned and oiled it before taking it to the range. Im glad I did because I find any signs of any kind of lubricant anywhere. It’s the first gun I have bought without any kind of oil or grease from the manufacturer.
That thing is so dry you can literally hear the bolt scratching. CLP my guy
I run M95 and M88 Brass in my Magpul Gen 2 magazines. Over 2000 rounds so far in my RA AR-15 and the only problem I've had is some bad primers in some Winchesters so... all in all a great rifle for the price (Paid $450.00) for my Radical RF 15.
I haveradica
Bro I’m spending like $500 just for the complete upper alone
@@fabiancastillo5784 bruh. I just bought it for $414.99 shipped to FL from Family Firearms. How did you manage to get scammed that badly?
Duramag,ETS, .Magpul, Korean, steel, brass. I've had good luck with mine, ty for posting continued success
Good rifle for the price. Out of the box I had failure to eject. Sent it back to Radical firearms for repair. Got it back same issue. I took it apart and found that the gas rings were over sized. Put in a a different BCG, problem solved. I did change the gas rings on their bcg, now it works properly.
Normally the problem with these things
NORMALLY I CLEAN A FIREARM WHEN I TAKE IT OUT OF THE BOX,STEP #1
This guy is a clown..... I'll run this budget build like a high end (lubed rifle) I have no idea what this person was expecting.... mil spec isn't even close to a high end rifle.... just lube it and you'll have a great weapon like the military expects...
I never have, never had any issues 🤷♂️
Agree, took mine apart cleaned and lubed
The instructions clearly state to lubricate before you even fire the first round
You Should definitely ALWAYS follow the instructions. If something happens to the firearm it helps with the warranty claim
Plus, if you think about it, the cheap steel ammo has less gunpowder in it, but yet they won’t tell you that😂😂
Does it really? Huh... Good to know.
Thanks for a great review of a fine budget firearm. Your methodology and expertise is highly appreciated. Keep up the good reviews!
Hell yeah i appreciate that
Brought a smile to my face
It's the ammo. I have one. Had the same issue. I didn't believe it at first, but it runs great on white box 55 grain.
So the mag it comes with is fine, should be the ammo?
@@3802580cmyes I have the exact same model and only ever used brass, put a few hundred rounds through it and never once jammed
Yup. Same here. This gun hates steel casing. But brass shoots all day no problem
Bought the same rifle shot 60 brass right out of the box zero issues.
Edit: used magpull Pmags not the cheapo steel one
I buy 2 of every gun that I purchase so that I can keep one brand new in box for later in life. I can't afford to find out 15 or 20 years down the road that I have a gun that doesn't shoot all brass/steel cased ammo right out of the box. This makes your review absolutely valuable because I was about to buy a couple of these and store them away. Many thanks for taking time to review brands. Subscribed.
Haha welcome to the party!
Why buy so many guns?
but u can afford to buy 2 of them lmfao i love redneck logic
@@ruskimofiafor later in life or afterlife self-defense purposes
I’m at over 3000 rounds with my RH AR15 that is carbine length gas system purchased in 2016. I shoot only brass case, and follow the recommended cleaning/maintenance. I’ve never had a failure to cycle. Great rifle, brand and QC. BTW… There was a printed note in the paperwork that warned against steel case ammo..
The RF 15 I got has a 3lb trigger :)
Edit: I had the same issue with RF15 with failures to cycle. I took to the gun shop I purchased it from and they kindly fixed it for me for free since I bought it as new. Had to do some paper work for it, but it was certainly better than paying anything to fix it. After I got it fixed, it was THE BEST weapon I fired :)
ITS the BCG i promise you i changed mine now it cycles no issue
@@kountryboykray8729 Glad to know yours is working as well :)
What was the problem?
I forgot what the mechanical part was called but it had something to do with the trigger pin.@@dickeymoore3662
This, for me it was the gas rings, they were oversize. @@kountryboykray8729
Got 2 R.F.'s x39's Uppers with their heavy barrels and never had a issue with them on Anderson Lowers.... 400 bucks for complete X39 rifle n a nice Pic rail for optics......
Bought the Radical RF a few days ago. I haven’t fired it yet but found out the mag won’t “lock in” to the gun. I’ve replaced the mag. I tore the gun down to inspect and clean. It’s obviously been fired at least once. Small about of carbon on the firing pin. Bolt scratched. I’m trying to not let that bother me. Bought this new from Dunham sports. I hope it breaks in better than yours did.
Ma pasó lo mismo el cargador no se fija al arma
i bought a new in box RF in 7.62x39 and ran great with steal amo
I bet your hand slips around like you're 14 again quite often.
RockOn.StayFree.
Rofl! Classic.
I never seen this gun do that in any video or for me. Was suppressed. I run steel case bullets all the time never jammed. But when I first got it I ran brass and it never jammed then later on ran the steel.
Im pretty sure somewhere on the website or in the user manual, Radical suggests not using steel case ammo. I could be wrong and might be thinking of another gun, but generally, all my radical ever eats is M855 and occasionally 55gr .223s, (through standard-cap Pmags, steel mags, and windowed mags) and ive never had a hiccup.
I've ran steal case threw it an it was fine polylacker steal case is the best in my opinion for ar but I've only read the manual an it said no 223 rem other then that any 223 or 556 is fine as long as it's not 223 rem yr fi e from what I've learned
@ErikHyndmanto its because youtube I dont really care to be accurate with my vocabulary lmfao
Ive had my RF15 for a solid year now. Its got 1k tula steel through it and 2k rounds of brass. The steel case was randomness. I could go out and shoot 150 rounds amd not have one issue, next outing it would fail to extract almost every mag. Id have to drive the case out with a claening rod. No problems from brass.
Could of changed your extractor spring to a bcm and it would run steel
@@ms1406 my extractor was ripping the rim of the case off every time. Not sure the extractor spring would fix that. 2k rounds of pmc xtac not one problem though
It’s failing a cycle because you’re using cheap steel ammo if you use brass, you have way less of that chance, and that’s for most AR 15’s in my case
An A.R. 15 is a military rifle, which would only usually shoot brass so ya
How to tell anyone looking at these if you can afford better get better. I got a DPMS and a Delton almost 20 years ago and they eat steel case for breakfast I swapped the lowers back and forth with the uppers and they still function 100%.
I put a PSA bcg in mine, and it has run flawlessly since.
I just picked up one of these. First AR I hope it works well! Thanks for the video
I would 100% swap out the BCG on this rifle. From working on several radicals and owning one myself you really cant shoot steel case with the stock configuration. You may notice that there is a lot of gas coming from the bolt area, this is due to the gas key on the BCG. A lot of cheaper rifles will have this issue.
If the key is leaking you can remove it, polish it on a perfectly flat surface, put some loctite 620 sleeve retainer compound on it and re-install. Saw that trick on school of the American rifle, a great qualified gunsmith and AR armorer. His channel is great.
"Slides like I'm 14 again." Epic. I literally laughed out loud.... Radical Firearms are quite the value.
You need to throw that supplied magazine into the nearest garage can and lube the heck out of your BCG.
Done and done haha
Brass case with magpul mags should fix feeding issues. A 2moa red dot should tighten up the grouping.
Just put a deposit on one myself, it was on sale for $499, with taxes $532 and that's just an incredible price I spent over $600 for my Ruger AR and that was on sale and considered a budget rifle lol, don't have any complaints on my Ruger AR except it was getting lonely so I simply had to get it a little brother 🤣😂, from all the reviews on the RADICAL FIREARMS 15DSR-M4 5.56 I think I'll be happy
The thank you Kevin shirt is very tasteful. I love it
Haha yeah it seems to be a crowd favorite
Great personality on this channel. Great work man
I got that same model radical AR-15 the first 30 rounds out of the metal magazine I had got a few jams but after that magazine I have yet to have any malfunctions steelcase or brass
Just got an RF-15. Only around 100 - 120 rounds through it. No malfunctions running 556, BUT did experience some of these “ejecting but not feeding” issues on 2 mags of 223. I am guessing it is due to under gassing with the 223 ammo, but it would only happen on a small handful during the first 5 rounds of the mag. After that everything was fine. Just seems that either the gas doesn’t like 223 or the mag doesn’t like 223. 556 is perfect which would make sense as it is rifled in 556 NATO
Gas key on the BCG
Great video! I am going to buy one today, because the price is unbelievable. Almost too good to be true. We shall see...
Hopefully yours works well!
Bro as soon as you said steel cased, I knew that gun wouldn't run.. it has to be set up for steel casing as the gas expansion is different. Brass is used because it expands better. Then as soon as you said you would change to brass.. I knew it run and run well because every other radical video I have seen that thing runs good.
Over all, good job!
After a solid break in, she runs steel now too
@@theblindsniper9130 that is great news... cuz i fixing to get a radical!
Out the box. Clean& oil it, save yourself some trouble. Pretty decent tool,🎯👍👍
I thought maybe the issues were the steel mags I’ve had problems with them in other ARs before. It definitely seemed to be ammo related
Some don't like steel ammo for some reason. That is why you try both at the range.
Thanks for your video 👍
You might want to try adjusting your gas recoil system on the front. THANK YOU!
No adjustable gas system on the radical firearms ar15s
Always pre-inspect and clean/lube a new out of the box firearm. Also don't recommend cheek resting the first mag
Yep always a good idea.
We dont do good ideas here.
The rubber pad is removable and has a cut out for a tool
Put Velcro on your stock eill tighten,and quieten it up .
Just came across you channel, not sure why just now lol. Great video. My radical has been great. My 5.56 has been good. My 7.62 Radical actually hates brass lol
Well welcome to the party!
I should get an x39 AR
@@theblindsniper9130I really love my Radical x39 it can be picky though. Once I ran several 100s of rounds it has really been a great rifle.
Ironically, my base mag did better than any other mag i bought for my rf-15, havent had a jam or hangup but of course, thats my own experience.
B5 Is soooo worth it!
I have the exact same rifle but mine always cycles not sure what’s wrong with yours
It works better at the end of the video
@@theblindsniper9130 I saw that I do have an a2 stock with a rifle buffer on mine witch might make it cycle better not sure
Needs break-in.
Mine has shot everything I’ve tried just fine. I put a drop in trigger and it shoots like a $1,500 rifle.
What drop in did you buy?
Love my radical rock on
Rock on pawpaw
Anyone know what type of bird that was? Man that was loud and sounded huge
Peacook i think
Yeah that's Kevin his peacock
Definitely a peacock. We had neighbors that had multiple peacocks& guineas. Very loud, when ya got 3,or 4 going,🙄. Often wondered what they would taste like,🤔😉
Like you said along with multiple comments, don't use steel casing ammo in this rifle.
Any play between the upper and lower receivers?
Nope
Plus for those that don’t believe me that the steel ammo has less gunpowder, buy some brass ammo, and buy some scale and weigh them out. You’ll be shocked at the results.
Brass is heavier than steel if youre just weighing the entire cartridge
And different kinds of smokeless powder require less weight to achieve a specific pressure and pressure curve
30gr of 3031 is VERY different from 30gr of 4064
I learned A LOT from the comments below and OF COURSE from this vid. I bought my RAD RPR based on positive comments. I have to revisit the different models beside the RPR.
#1 reason for the misfires/jams? Cheap sh*t Rooskie bas*ar* -putin ammo. NO intentions of buying this crap.
I recall ages ago firing blanks thru an M16 (real deal) when I was in the USAF, on an exercise. I'd blame the rounds not being of a consistent load, not enough gas generated to work the BCG. I was clearing jams. misfires, failure to battery, and whatever else you call it...maybe some stovepipes? We used the std. MILSPEC mags, aluminum, yes?. Could be repeating some "terms". We used the std. MILSPEC mags. What model Colt AR we had is beyond me now, but it didn't have the forward assist, SURE as HE*L needed it. Yeah, it was like firing a bolt action.
But I hope it's NOT the BCG.
The MAGPUL sights weren't for precision shooting? I thought you were saying that about the cheap no-name plastic sights you bought on EBAY (or Amazon?)? Do those things actually, truly, 100% perfectly fall inline w/each other? Windage? Holding the gun rock solid steady?
I'm debating whether to fire mine stone cold tomorrow when I pick it up, or play nice & first take it apart, clean & lube it. If the store will "quick mount" some iron sights I have, just might go for it. Have got everything else I need.
BTW. HAPPY New Year to y'all. (Happy NY to me too).
Happiness is a WARM GUN.
My rf15 ran smooth with any mag and brass ammo! I dont run steel through any of my guns. If i had a AK i would run steel
An excellent objective observation and test! Thank you! I own one and haven't put a single round through it. Looking forward to it.
This is my first rifle can you make a video or link a video for the best accessories to pair with the firearm. Also is it better to have 300black out or 5.56 NATO
ua-cam.com/video/GJIBcYmW0IA/v-deo.html
Just put a order in for a RF15 on sale for $387 no sale tax either so I’m weary about the quality
Satisfied with the Radical? I got one for $450 all-in with Mission First Tactical stock and grip. Comes in next week.
Be wary. I bought a new Always Armed upper for my 300 blk. The Radical upper is terrible... Always Armed is a cheaper brand but far superior to the Radical upper...
@@JewTubeSux you could definitely tell it’s a cheaper rifle - buffer tube is loud and sloppy but shoots like a charm haven’t had but 1 malfunction in over 1000 rounds for overall I’d give it a 5/10 considering ALL AR choices it’s not a bad beginner one to learn with but there are 100% better options
Bro. they sold you a lemon. My RF shot everything right out of the box.
Do you recommend this firearm ?
Reason I ask I was thinking of getting one .
I recommend it I have 2 they work great steel case and all but 1 I had some trouble with my bcg but it was a easy fix I think the firing pin was off spec so put another one in and it also ran great.
@@thedude828 I really appreciate the feedback 🙏🏼ordering one 🔥
@@deeone5231 no problem buddy you will enjoy it
No dont buy , buy a anderson is better quality and not much expensive
I have one and I love it. I shoot brass and only had one malfunction very early like less than 50 rounds in. Now it's 1000 rounds in. The Radical Firearms love grease, and the BCG and recoil spring will be happy as pigs in the mud if it's greased heavily. It runs like butter when I use Hoppes black grease, and any good gun grease will do. I might try to shoot cheaper steel cases to see if it will run those since I am past that break in period and I'll le t you know.
Generrally RF AR’s don’t cycle weak steel case ammo because they are properly gassed.
My Radical right out of the box hasnt missed a beat yet. Only 300 rounds though, and only brass
If this was a drinking game I would be blasted for every time he mentions his Delton DTI. I don’t think you are supposed to mention a competitive product so many times during a review. 😂
Youll live lol
Usually a feed issue is with the magazine.
I’ve never noticed it but do they all make that scratching sound when you pull the charging handle it just sounds so rough
Not all, many cheaper ones do when new until they break in. This gun looks bone try too, ARs run best wet.
i have the rifle i believe the owners manual and or website recommends not to use steel case or reloaded ammo
They all do, its a liability
@@theblindsniper9130 that adds up in case you measure your powder wrong and steel is cheaper and less quality than brass
🤔watching first video
😆 "Chinesium Sight"
👍😁Subscribed
Hell yeah, welcome!
I think his malfunction was coming from the magazines those magazines work but isn’t compatible to the rifle.
Fast forward to the end of the video
You would think after the 4th or 5th failure you'd want to try different ammo. ARs are generally not loose like AKs, not built to eat garbage.
If it cant run steel, it doesnt deserve brass
Got one in laway changing it for a m&p
Once broken in they are fine. My socom shoots m193 beautifully
Oh yeah run steel keep it super lubed
my brotha, new sub for ya here n i am a u.s. marine vet here 93' to 97' active ! n only have email here , def. wanna talk more n godspeed to our beloved 2A, thanks > tom !
Hell yeah, welcome to the party! I bet you have some amazing stories
Oh yeah Kevin screaming shoot it
Bro you can even shot accurate even with those iron sights
So much YADA YADA!!!!
ua-cam.com/video/SlWSm3xrIXY/v-deo.html
10:32, the sound of a VERY dry chamber getting grinded down.. .. yikes.
It needs to be clean and oil up first always
Laughs in Daniel defense
Ive never had a problem with the sam gun
I have a radical it does not shoot steel casings they’re barrels are bored out smaller than those steel casings. You can run brass threw them all day not like a AK where you can spray just about anything out of those fuckers and it’ll chew
🇺🇸
Love your content man. Keep up the good fight!
Where are you finding cheap steelcase ammo nowadays?
Bulk online orders
radical guns are meant for hot 5.56 ammo. not steel case or any .223 really. that is why you had ejection issues and it not locking all the way back.
Or the gas key wasnt properly fastened
Excuse me sir but why is it significant that you have less than 20 rds capacity?
@@christianward6787 youtube rules
@@theblindsniper9130 lame!
@@christianward6787 very haha
still think i may avoid a radical. My AR started life as a dpms and has always run flawlessly.Thats all we used at the nuke plant alongside of bushmasters.
i think the peacock approves!
Use brass says in instructions do not use Steel ammo
NEVER HAD A ISSUE HAD MINE 3 YEAR THIS IS HILARIOUS
Got mine off gun broker with a lvpo scope $575
My Diamondback and ATI Milsport ( all metal ) do not like steel case ammo…I can’t use steel in those ….my Radical and Anderson have no issues ….all I buy is brass…isn’t worth the hassle
@@rudyv6100 especially at modern prices