If the brake neutral return stick badly, take the plate from directly in front of the seat off and grease the thing that the speed lever and brake pedal are tied too. It makes it so much easier.
Thanks for response re: 782. It has 782 on hood and I thought some had hydrolics not all, and it has a 19 hp motor. I would like hydro plow control either way, hope this is possible. I have all lift components. Please advise
hello, interested in adding hydraulic lift and angle to my CC782 for snow plowing. How do I run lines from trany if it's not ported, is there a cover with ports, tap into or need different trany? Also my 782 has a 19 hp Koler, what's up with that. Any help would be appreciated, thanks Steve
Nice new addition. Decent condition for an '82. Gorgeous little Briggs on the tiller too. I'd love to have the pulleys off it.
If the brake neutral return stick badly, take the plate from directly in front of the seat off and grease the thing that the speed lever and brake pedal are tied too. It makes it so much easier.
Nice, where did you buy the 3 point hitch?
You should do a video on how you put the 3 point hitch on it
Thanks for response re: 782. It has 782 on hood and I thought some had hydrolics not all, and it has a 19 hp motor. I would like hydro plow control either way, hope this is possible. I have all lift components. Please advise
hello, interested in adding hydraulic lift and angle to my CC782 for snow plowing. How do I run lines from trany if it's not ported, is there a cover with ports, tap into or need different trany? Also my 782 has a 19 hp Koler, what's up with that. Any help would be appreciated, thanks Steve
you have a 782 without
the hydraulic lift? then it must not be a 782 and sounds like a 682
Nice tractor, those are Jacobsen weights if you decide to sell them let me know on Fb.
message me on facebook and id sell them