Roll Off Observatory Roof Remotely from anywhere in the world- Astrophotography
Вставка
- Опубліковано 29 гру 2024
- A very cheap solution to remotely operating a motorized Observatory roll off roof.
Using a wi-fi enabled relay switch costing just £22.90 I can now open my roll off roof with my phone from anywhere in the world.
#ASTROBLOKE #Astrophotography #Astronomy
www.youtube.co....
wifi relay switch
amzn.to/3y4URf5
18AWG silicone wire
amzn.to/3i1PQht
Motor for roof (already installed) - amzn.to/36XZknR
www.Astrobloke.co.uk
Also check out Joes channel
/ @joesastrophoto
www.Astrobloke.co.uk Where you can view all my images and order prints.
Join this channel or Patreon to get access to perks:
/ @astrobloke
www.patreon.co...
Equipment I use, these links cost you no more to use but will earn my channel a small commission. It all helps support the channel.
Mele Quieter 2 PC -
UK - amzn.to/3MPDANY
US - amzn.to/3wFs5Cd
Wolfwise Shower Canopy
UK - amzn.to/3JYoSDi
US - amzn.to/3PNjbvc
Alex Tech split 10ft cord wrap
UK - amzn.to/3etzgow
US - amzn.to/3GoZeXn
100 reusable velcro cable ties
UK - amzn.to/2Tn4feS
US - amzn.to/3PCpjpL
Short USB C Cable
UK - amzn.to/3iDmXHR
US - amzn.to/3G9EIcU
RCA Male Plug
UK - amzn.to/3Bg3Iws
US - amzn.to/3wD4Vxq
OPT links to equipment. Even if you click this link and then purchase something I get a small commission at no extra cost to you. Really helps my channel out, Thank you
Mounts
Sky Watcher EQ8R PRO bit.ly/39HVTpR
Sky Watcher EQ6R Pro bit.ly/3i1afU0
Sky Watcher HEQ5 bit.ly/2Ty7BeZ
Sky Watcher AZ GTI bit.ly/3iGmIvC
Cameras
ZWO ASI 294MM Pro bit.ly/2VbxNN6
ZWO ASI 183MM Pro bit.ly/3kSLPOs
ZWO ASI 290mm mini bit.ly/2UO71u6
ZWO ASI 120mm mini bit.ly/2Twjceu
Filters
Antlia 3nm bit.ly/3GhuaZl
Antlia LRGB bit.ly/3MDdca8
Chroma Oiii 3nm 1.25" bit.ly/3rviomS
Chroma Ha 3nm 1.25" bit.ly/2Wcsnlj
Optolong LRGB 1.25" set bit.ly/36ZtXJq
ZWO EFW Electronic filter wheel bit.ly/3fbmKe3
Telescopes
RC8 bit.ly/3x5AexT
Sky Watcher 130PDS
Zenithstar 61 bit.ly/2UEgFjc
William Optics 50mm guidescope bit.ly/36ZLYHK
Correctors
Sky Watcher 0.9Coma Corrector
Baader MPCC bit.ly/2V76LpZ
Astro Essential 0.75Reducer
William Optics Flat61A bit.ly/3zw9sAf
William Optics Flat 61R bit.ly/3BEvaEj
Accessories
Pegasus Astro pocket powerbox advance bit.ly/3iMFeSO
ZWO OAG Off Axis Guider bit.ly/3i1RIqD
ProLogik balance meter and tuning tool
www.prologik-a...
The meter is of a high quality and works really well. Not only is it great for helping to find perfect balance in stiff mounts but it is a fantastic aid to fine tuning your mount for the best guiding. It will assist you in adjusting your worm drive/gear mesh to the optimum setting and giving you great smooth tracking and excellent guiding numbers.
Thanks for the shout out Glenn!
Anytime Joe and looking forward to our coding project lol
Thats a great solution there Glenn with double backup including the neighbour. I suggest leaving a pint in the shed so your neighbour might remove and replace your dust caps also :)
Now thats a top tip lmao
Smashing vid Glenn...💯
Thanks Mitch. How are things going with you? Have you got your mount yet
@@Astrobloke yeh things are good,but no mount yet...😭 End of June but is more going to be end of July 😭😄
Nice cheap solution.. looking forward to see how your collaboration goes. Grats on 1k!
Thanks Darrell.
Nice work, looking forward to the next collab, thanks mate!
You may not have to wait long sir
well done on 1000 Subscribers!
Thank you very much
Looks a very nice affordable solution Glenn, nice work.
Thanks Ollie.
Another point: you may consider magnetic contacts on the appropriate altitude and azimuth on your mount instead of infrared detectors.
Thank you Jean. Yes I will look at all options
Brilliantly done
Thank Derek
I’m not jealous at all 😂 looks amazing mate, great work. Congratulations on the 1000 sub, well deserved!
Well when you are ready to sort one you have help at hand. Thank you Russell, its a milestone you will also pass soon.
These videos are great and very informative - taking notes as I’ll start building my own shed observatory with rolling roof in a couple of weeks, keep up the great work!
Thank you so much I really appreciate the kind comments. Any help I can offer please just ask.
Awesome Observatory!! Congrats For 1K Subs, Keep going Man!! 👏👏👍
Thank you
Great solution Glen !! I reckon you'll save at least £1000 compared to a non DIY automated roof. Great video and congrats on 1k subscribers
Thanks Paul. I have definitely saved a lot of money. Would rather spend my money on a scope or camera. I also love the projects to be fair. I think someone who paid £1000’s for theirs must have watched my video as I got a dislike 🤣😂
Really clever stuff
Thank you for that
Nice one Glenn! Cool backup solution in the event of computer/Arduino crashes etc. Will look into this for my Obs. You will need to add sensors to monitor the state of the roof (open/closed). I have two sets of magnetic sensors for the roof and then park sensors for the mounts. Because I have two scopes in operation, my setup is a bit more complicated because I need to make sure both scopes are safely parked before closing. It’s a fun project. Look forward to seeing your updates.
Thank you. I will add sensors but because I can also remote in to the live feed camera from anywhere I can visually monitor the scope and roof before moving anything. The only thing at the moment that automatically moves is the scope parks at the end of a sequence. I am sure in the end I will have cloud/rain sensors and all sorts.
Congratulations on the 1000 Subs mate. Interesting video, Looks simple to set up. Observatory is coming along nicely.
Thank you Ben. Yes its a lot easier than it even looks
Nicely done Glenn! Be interesting to see what you and Joe come up with!
Coming soon!
Nice one mate
Thanks ryan
Thanks for the inspiration - I will be doing almost the exact same setup for now (I have a digital dome works that will be connected to it eventually) - great work! How do you handle the momentary contact with the wifi relay device or does the motor controller not care if the contacts are kept closed the full motion of open or full motion of closed? Normally I would think this would just be a momentary contact but I imagine the relay is on the whole time until you press the close button. Just curious - keep us the great work!!
hi and thank you for watching and taking the time to comment. I no longer use this as I now run the roof through NINA and use an Arduino uno with a relay shield to control the motor. the motor only switches to move to open or close after the relay has cycled through its switch. There ws always about a 1 sec delay after relay switched before the roof moved. Nothing special had to be set or changed, it just worked out the box.
@@Astrobloke Thanks for the reply - I see that you use NINA and I will actually be using Digital Dome Works (was given to me by a good friend that didn't want to use it with his dome). I will have to modify slightly to use with the gate motor control and other interlocks, but for now I will keep it simple to get things up and running. Thanks!
Very Nice: Have you investigated NINA's Switch capabilities?
Hi Dale and thank you. I use the switch feature to control my pegasus powerbox. I do now have it fully automated and can remote in even via my iphone. Roof controlled through NINA dome controls. Works great
ua-cam.com/video/GGe5lyMhnUY/v-deo.html
Glenn that’s great thanks for sharing. Can I ask what gate motor system you have? I am looking at automating the roof and worried about compatibility. Thanks a lot. (Chris. UK, Kent)
Hi Chris. I have links to the one I bought and all the installation details here
ua-cam.com/video/dZv0OpL_5KI/v-deo.html
Lovely thanks I will take a look. I am just starting the build of the observatory. Big learning curve. Thanks again. Chris.
@@liveinthesunshine3018 very much so. I have a few videos on my build which may help with ideas. Happy to help if you have any questions
Thanks a lot. I have laid the base and set the bolts for the pier. That’s it so far. Just going to order the materials then build starts in a couple of weeks. Can’t wait. Aim is 100% automation as south uk clear sky is few and far between so need to make the most of the time. Thanks.
@@liveinthesunshine3018 You will love it. Best thing I ever did for my hobby. Where in UK are you as I am SE basically Southend-on-sea
hi mate i have a question! how do you control you mount home position? do you have the mount parked at 90 from north while the lid is on them just move the scope manually to PA? i use the asiair and wondered how or if i can set a custom home position...thanks
unfortunately I have not used ASIAIR so not sure what features it has. In Eqmod I have a parked scope position which is both axis being horizontal so the roof clears any scopes. When I unpark the scope it goes to the home position and from there It will slew and platesolve to whichever targets I select.
@@Astrobloke hi ok thanks, what happens when you power down?
@@stxe34 sorry I am not sure what you are asking here. If I power down it just stays parked and then after powering up I can then say unpark to home and it will go to home position. Because the mount is permanently fixed to a pier there is no PA needed as it never moves once it is set
Glen, How do you wire it for reverse eg close?
You just connect one wire to the open switch and one to the close switch, the open/close controls are done by the motor you are just switching to one or the other