Great video Dan, as always. We had rats in the house when we moved in - they chewed through cables in the boiler! Found where they were getting in and live caught them (there were quite a few!) and released them in the wheat field next door where they belonged. Got bitten by one as I was releasing it; it bled quite a bit but it healed up within days. (Couldn’t be bothered going to hospital, in spite of much nagging from Mrs!)
Haha I was going to say! I’m on the mrs’ side there! Defo should have got checked out mate! Can’t believe you caught them live too! Thanks for the tip mate! Really appreciated!!
Dan, how do u price a job up on an ideal logic when it makes the trumping noise as it can be multiple parts? Venturi,burner,gas valve etc, theres many parts what cause that noise and after you cleaned Venturi, your looking at burner or gas valve, but u can't be sure its that. I know the trick with the burner if it's floppy in left hand side were fan goes then it's faulty, but I've had it firm and it's still the burner, and the burner looks very clean, I hate that fault, am lucky as I have a gv and burner as vstock to eliminate but if you don't then it would be a nightmare
Hi mate, I price it for the worst case scenario… it being both, try the Gv first, if not then the burner. I’ve known of it before being both what’s at fault. Hope that helps mate.
Perhaps setup an amazon associates storefront? I don't think there's any downsides and can get some kickback from sales, something like 3 - 4%. Might pay for a pint or two :)
Hey mate. I do have one to be fair. However never had any sales from it 😂😂 it’s not very well set up mind! And link is in the bio if anyone does want to check it out 😂😂😂
Haven’t snapped a flow turbine yet (touch wood) but can’t you bash it out from under the mains connection like you can do with the diverter cartridge under the flow connection? Would save buying the whole block but a bit unsure 🤷♂️
Totally love this episode bro ! Felt like an apprentice running around with you and only to be told by the cat that yeah ! I own your boss bit$h ! Solved my owners leak and got a great dinner all at the same time ! Regards Puss in boots
Typical great video mate although comments 1 you have already made the video about UA-cam revenue, 2 I hope you wash your face before kissing your mrs after putting that flexi to your mouth 😂 and finally 3 if you suspect rodents, why no gloves!? 😂 Someone has to keep an eye on you Dan 😂 😂
@@Bigdaftboy 😂😂😂😂 1, yeh I wasn’t sure I was going to put the revenue video out before this one. 2, a kiss off the mrs would be a fine thing 😂😂, and 3,… no comment 😂😂😂 cheers for the comment mate. Made me chuckle haha
Please like, share and subscribe! Its all Free 😂❤
Great video Dan, as always.
We had rats in the house when we moved in - they chewed through cables in the boiler!
Found where they were getting in and live caught them (there were quite a few!) and released them in the wheat field next door where they belonged.
Got bitten by one as I was releasing it; it bled quite a bit but it healed up within days. (Couldn’t be bothered going to hospital, in spite of much nagging from Mrs!)
Haha I was going to say! I’m on the mrs’ side there! Defo should have got checked out mate! Can’t believe you caught them live too! Thanks for the tip mate! Really appreciated!!
Nice mix of jobs there mate, good video 👊🏾
Cheers mate 🙏🏽
Been to alot ot jobs with rats chewing through the pan connector. The damage thy cause is always found when theres water everywhere haha
Haha, I’ve seen a couple of pan connectors chewed 🤢 but you’re right. When they go, they go! Haha
I think one of those mice have been at your plumb tub 😮😂 thanks for the vid mate 👍
Haha I think so too mate! It’s years old the blue one though!
I did one otherday I took pump out
I always take the whole gas valve out. Nice video 👍
That would probably be easiest way mate, normally I can get them out without taking the bloody pipe out! Haha
That was a short n sweet one❤. Top job Dan as always. Thank you❤
Thanks mate! Yeh not the longest episode this one! Hopefully still
Enjoyable to watch!
Dan, how do u price a job up on an ideal logic when it makes the trumping noise as it can be multiple parts? Venturi,burner,gas valve etc, theres many parts what cause that noise and after you cleaned Venturi, your looking at burner or gas valve, but u can't be sure its that. I know the trick with the burner if it's floppy in left hand side were fan goes then it's faulty, but I've had it firm and it's still the burner, and the burner looks very clean, I hate that fault, am lucky as I have a gv and burner as vstock to eliminate but if you don't then it would be a nightmare
Hi mate, I price it for the worst case scenario… it being both, try the Gv first, if not then the burner. I’ve known of it before being both what’s at fault. Hope that helps mate.
Great videos. Keep them coming. Just subbed.
Legend mate. Really appreciate it 💪🏼
Thanks
😲Thank you very very very much Alex!
@@Heatking Thanks Dan . Thank you for taking the time 👌
@@AlexRocks24-7 anytime mate
Nice one Dan thanksfor the upload
Thanks Keith! 💪🏼
Thanks for the upload mate. I’ve just invested in the cartridge kit. Very handy to have. Good content as always. 👍👍
Cheers Paul, it is handy to have, especially when you’re on a job already and they then mention the dripping tap 😂
Tell me why you put gas pipe back in before you tightened the cartridge 😅 100% would do the same thou 😂 great video mate 🙌👍
Did I? 😂😂😂 what a wing nut 😂 I just like to make the job harder mate, sometimes it’s just not challenging enough 😂 cheers mate
@@Heatking made me laugh anyway cause it’s what I would do 😂
Another good one 👍
Thank you very much Derek! 💪🏼
Dripping taps😖
Don’t mate 😂😂😂
Love changing taps. Theraputic for me. Is that sad? 😂
Haha. Maybe a little. I love changing trvs though 🤦🏽♂️😂😂😂
Perhaps setup an amazon associates storefront? I don't think there's any downsides and can get some kickback from sales, something like 3 - 4%. Might pay for a pint or two :)
Hey mate. I do have one to be fair. However never had any sales from it 😂😂 it’s not very well set up mind! And link is in the bio if anyone does want to check it out 😂😂😂
@@Heatking ahh, I only checked the linktree
I did one otherday I took pump out didn’t av the socket set
Yeh suppose taking the pump out isn’t a bad job. Just hope the o rings reseal 😂😂
Great video, shame about the mouse, but well done the cat 🐾
Yeh it is a shame but unfortunately suppose that’s the circle of life, predator and prey :( thanks mate!
Good vid mate ❤
Cheers buddy as always!
Haven’t snapped a flow turbine yet (touch wood) but can’t you bash it out from under the mains connection like you can do with the diverter cartridge under the flow connection? Would save buying the whole block but a bit unsure 🤷♂️
I’ve snapped a few now. However…. I do have a snapped one in the garage in the block so illltry this mate! Never tried knocking it out from underneath
Totally love this episode bro ! Felt like an apprentice running around with you and only to be told by the cat that yeah ! I own your boss bit$h !
Solved my owners leak and got a great dinner all at the same time !
Regards
Puss in boots
😂😂😂😂 absolutely brilliant! Glad you enjoyed it mate ♥️
Mate, how much do you charge for swapping the tap cartridge
£90 Inc materials mate for both jobs on this one.
Thanks marra, I’m gonna start swapping them. Enjoying the content
@gazzagasco cheers mate. Its better to replace the tap in all honesty most of the time like 😂
@@Heatking 😂😂I haven’t done much plumbing, only on boilers and radiators, gonna give it a go pal. Cheers
@@gazzagasco good luck buddy 💪🏼
🤘😎🤘🫖☕️🍪🎥👍👍
Cheers Wayne 🍻
First!!
Cheers buddy!
Typical great video mate although comments 1 you have already made the video about UA-cam revenue, 2 I hope you wash your face before kissing your mrs after putting that flexi to your mouth 😂 and finally 3 if you suspect rodents, why no gloves!? 😂 Someone has to keep an eye on you Dan 😂 😂
@@Bigdaftboy 😂😂😂😂 1, yeh I wasn’t sure I was going to put the revenue video out before this one. 2, a kiss off the mrs would be a fine thing 😂😂, and 3,… no comment 😂😂😂 cheers for the comment mate. Made me chuckle haha
@@Heatking you’re welcome I thought it disappeared just posted it in the wrong spot 😂 it’s a shame when you get older 😝
@@Bigdaftboy haha comments a comment mate. Dont worry about it. ♥️