Light bar looks good! I also had to replace the battery in my 16 Tundra back in Sept and I picked the DieHard Platinum AGM Battery. Its a solid battery and even with temps currently in the teens in N. TX starts right up and handles all my electronics and lights.
Thanks for this video! Very helpful!!! The only tiny problem I had with my 2018 Tundra is I purchased the Rough Country brand model (Part #70657) very well done by RC as usual. However, the bracket is different, in the sense that you need to cut off the little plastic mesh grill in front since the bracket is made a bit differently, but other than that everything went fine!! thanks a lot for this video tutorial!!!
Installed these brackets today. If you’re mechanically experienced in the slightest there’s not much to it. Oh and to clarify, this bracket is for a HIDDEN bar. The other bars people are talking about that mount without removing the bumper are FLUSH mount options. The bumpers and grille are nothing to get off on these trucks, and you can actually do the install without removing the corner pieces of the bumper.
I got my Lasfit 30"light bar and Caliraised brackets as well, could you explain how you are able to do the install without removing the bumper end pieces?
@@jmiyake68 just saw this but honestly it’s been long enough now I’d have to have my truck in front of me. There was nothing on my truck connecting the black lower piece to the side pieces where the fog lights mount. Maybe there’s some models where there is but my ‘21 did not.
headlight revolution has lightbars with the brackets that are made for the actual vehicle They might cost a little bit more but well worth it and you don't need to take the bumper apart either
I actually have a trigger 4 system, it’s a Bluetooth system that you don’t have to run any wiring through your firewall. So you just splice the positive and negative wires on your light to the supplied plug on the trigger system and plug it into the box under the hood and that’s it.
that bracket is pretty sweet, even though its a little pricey for what it is makes an aweful nice install... im considering just tapping in a relay with my highbeams rather than doing a switch... might be easiest except i won't be able to run it with lights off, but not sure why i would ever do that anyway....
How old was your battery? Also what type did you replace it with? I plan to replace mine when it goes with this type of super battery that far exceeds what the truck requires.
They didn’t have a 32” only a 30”. I had to order the bar and mounts separate. All links are in the description where to get the products. I had a trigger system already if you don’t you will need to order a harness also.
Thanks for the video. Where did you get the wireless switch that you used to turn the light bar on? Also what part of Tennessee are you located? Im near Nashville.
Saw a new 22 tundra video where some guy took his truck off roading and drove it hard in the mud hard enough that his truck bed flexed and banged into the back of his cab and damaged the cab on both sides so maybe this truck isn't ment for off roading
Great mod Andy! Next time you take the grille off pop the covers off of your horns & you’ll hear a HUGE difference!!! Did you see doofus traded his Tundra in for a Ram? Hahahahaha!!! Needless to say I UNSUBSCRIBED!!! 🇺🇸🇺🇸🇺🇸Let’s Go Brandon🇺🇸🇺🇸🇺🇸
It’s crazy how much better this one looks than the new one.
Sheeeesh that looks dope! So glad you kept your Tundra, your my favorite tundra mod channel
Looks good, nice video on the install. Thanks for showing and sharing! Be safe and be blessed!!
Light bar looks good! I also had to replace the battery in my 16 Tundra back in Sept and I picked the DieHard Platinum AGM Battery. Its a solid battery and even with temps currently in the teens in N. TX starts right up and handles all my electronics and lights.
Looks great! Got mine a while back from Cali Raised!!
So hilarious brother 🤣😂. Lights look great my bro!
Thank you
Did mine thanks for help and ideas!!!
Yeah Rob traded his in for a Dodge .trader
Thanks for this video! Very helpful!!! The only tiny problem I had with my 2018 Tundra is I purchased the Rough Country brand model (Part #70657) very well done by RC as usual. However, the bracket is different, in the sense that you need to cut off the little plastic mesh grill in front since the bracket is made a bit differently, but other than that everything went fine!! thanks a lot for this video tutorial!!!
Installed these brackets today. If you’re mechanically experienced in the slightest there’s not much to it. Oh and to clarify, this bracket is for a HIDDEN bar. The other bars people are talking about that mount without removing the bumper are FLUSH mount options. The bumpers and grille are nothing to get off on these trucks, and you can actually do the install without removing the corner pieces of the bumper.
I got my Lasfit 30"light bar and Caliraised brackets as well, could you explain how you are able to do the install without removing the bumper end pieces?
@@jmiyake68 just saw this but honestly it’s been long enough now I’d have to have my truck in front of me. There was nothing on my truck connecting the black lower piece to the side pieces where the fog lights mount. Maybe there’s some models where there is but my ‘21 did not.
headlight revolution has lightbars with the brackets that are made for the actual vehicle They might cost a little bit more but well worth it and you don't need to take the bumper apart either
Checked that out and they didn't even show a lightbar for the Tundra.
Nice video. One of my next mods to do for me.
Nice job. Looks great!
Looks BEAST!
I just ordered this. I think they were way more expensive a while back. I got it for $35. I hope to wire amber low and white high.
Morning Gear! 😃
Good morning
Show how you wired the lights.
Excellent job on the installation.
I actually have a trigger 4 system, it’s a Bluetooth system that you don’t have to run any wiring through your firewall. So you just splice the positive and negative wires on your light to the supplied plug on the trigger system and plug it into the box under the hood and that’s it.
Well, that explains it! Kinda cool
Andy do you have a link for the raptor light?thanks
that bracket is pretty sweet, even though its a little pricey for what it is makes an aweful nice install... im considering just tapping in a relay with my highbeams rather than doing a switch... might be easiest except i won't be able to run it with lights off, but not sure why i would ever do that anyway....
Well..I just got a used tundra 2020 ..low miles...I traded my Silverado.... hopefully I made the right decision .
Good job! Looks great. Where did you get those raptor lights and how did you put them in?
Hey does anyone know where to get rubber wheel well covers for a 2019 Tundra? I’ve googled it for a while and I can’t find them anywhere
Nice, I like it. 👍
How old was your battery? Also what type did you replace it with? I plan to replace mine when it goes with this type of super battery that far exceeds what the truck requires.
Is this the 32" light bar? Do you have to order the mounts and wiring harness separately from the light bar?
They didn’t have a 32” only a 30”. I had to order the bar and mounts separate. All links are in the description where to get the products. I had a trigger system already if you don’t you will need to order a harness also.
Thanks for the video. Where did you get the wireless switch that you used to turn the light bar on? Also what part of Tennessee are you located? Im near Nashville.
Im also in Tennessee. Looks great. I also would like to know where u got wireless remote
I got one of those, works great. How old was your battery? I will probably need one soon.
He said in a video yesterday 6 years old..
is there anyway to run those raptor lights to that bluetooth trigger4 switch?
How's that light bar holding up?
Saw a new 22 tundra video where some guy took his truck off roading and drove it hard in the mud hard enough that his truck bed flexed and banged into the back of his cab and damaged the cab on both sides so maybe this truck isn't ment for off roading
Removing that plastic piece was a bitch for me.
Great mod Andy! Next time you take the grille off pop the covers off of your horns & you’ll hear a HUGE difference!!!
Did you see doofus traded his Tundra in for a Ram? Hahahahaha!!! Needless to say I UNSUBSCRIBED!!!
🇺🇸🇺🇸🇺🇸Let’s Go Brandon🇺🇸🇺🇸🇺🇸