I'm a junior technician with a client's machine doing this and I was stressed out of my mind... I was hesitant that this would work, but it fricking did!!! Absolutely brilliant, thank you!!!
Hi Roger thanks for sharing. Not long ago i used xp and 32 bit computer mainly for mach3 .now i use the cheap red pcb with eagle logo. Around 15 dollar It works great with mach3 on any computer 32 or 64 bit Only pwm or laser start needs a work around but there are a lot of solutions for this available on the web. Keep up the good work
2024 and for me PCs have been both entertainment hub AND TORTUTURE CHAIMBER! you get games/programs that just don't quite work on the newer OS like before or not at all. You try to jump to a variant of linux- some stuff works better than windows under wine, some not at all or did work but then doesn't pending each iteration of either OS or wine/software version. Its a constant see-saw! I got a version of windows to install on sata drives thanks to a tutorial way back to edit the iso (so my legit cd is just a cool shiny coaster now) as well as W7 that no longer registers due to a change in hardware. I figure i will just have to create a hard drive for each OS or keep them on there own machine offline....
This work with dual pcs? One pc have the same problem i i used your method but it looks like the sychronisation with the other pc is not working Pls if u have any tips for that pls tell me
Been using it for a few months, but didn't work this morning, I usually run it before it hits the activation block. Maybe I messed up the internal clock, gonna wait and try again in a few days.
If one was to wait until 60 days does this mean that it becomes impossible to unlock or would running this troubleshooting in safe mode twice instead of once solve the problem?
Good question, been using this method for a few months, but it didn't work this morning, I will try it again when it gets stuck in the activation again, maybe the internal clock isn't working.
I like this method, simple and quick fix, I've heard there is a crack program available, but I can't find a link to it. I actually have both legit CD and CD key, it's stupid they also forced to activate online, I'm sure there's no support for that anymore.
I'm a junior technician with a client's machine doing this and I was stressed out of my mind... I was hesitant that this would work, but it fricking did!!! Absolutely brilliant, thank you!!!
You're very welcome!
Hi Roger thanks for sharing. Not long ago i used xp and 32 bit computer mainly for mach3 .now i use the cheap red pcb with eagle logo. Around 15 dollar It works great with mach3 on any computer 32 or 64 bit
Only pwm or laser start needs a work around but there are a lot of solutions for this available on the web. Keep up the good work
Dear Sir! Today You save my reputation at work. Thank You! It looks like we are similar age, - I am 1954. Good luck!
You are welcome!
It worked perfectly on a old Laptop I was working on..Thanks very much sir...😊
Happy to help
Assuming people need this for an old version of Mach 3. Perhaps a longer term solution is LinuxCnc. :).
Man you are a lifesaver ! Thanks for the help !
HI Roger, long time not use windows XP .I'm really appreciate Mr Roger because i have issue in xp but your videos solved my problem .thanks alots
Glad to help
Just use it, dont know wich kind of magic it is ... but worked perfectly.
Thank you
From Harry Potter
You're a champ. Just saved my bacon
2024 and for me PCs have been both entertainment hub AND TORTUTURE CHAIMBER! you get games/programs that just don't quite work on the newer OS like before or not at all. You try to jump to a variant of linux- some stuff works better than windows under wine, some not at all or did work but then doesn't pending each iteration of either OS or wine/software version. Its a constant see-saw! I got a version of windows to install on sata drives thanks to a tutorial way back to edit the iso (so my legit cd is just a cool shiny coaster now) as well as W7 that no longer registers due to a change in hardware. I figure i will just have to create a hard drive for each OS or keep them on there own machine offline....
Thank you so much, I tried 1 week until looking your video
You are welcome
Roger,
Your are a wealth of information! Thank you!
I did it by phone in 2023 there is a video around. There is an automated answer machine and you press number to do it.
Thanks mate, you just saved from having a big headache with this
Does this permit you to USE windows or just boot to the desktop, and what happens to your file dates?
THANKYOU SOOOOOOOOOOOOOOOO MUCH!!!!!!! I couldnt connect to the net for the other workaround this saved my ass omg
IT WORKS!!! Thank you!!!
You're welcome!
Good deal!
I always used the key generator.
I'm not sure if I still have them?
This work with dual pcs? One pc have the same problem i i used your method but it looks like the sychronisation with the other pc is not working
Pls if u have any tips for that pls tell me
In your procedure, After the word "setup" is the first character a zero or a capital o?
Capital "O" followed by lowercase "o" OobeBnk
Have you any idea what the problem might be if this worked twice but now it is not working the 3rd time?
Thank you so much for this bit of knowledge!
Thank You! Its work! Thanks a lot! :))) from Hungary
You're welcome!
Thank you uncle
Thank you so much! It helped me a lot!
You're welcome!
my Dolch is very grateful :)
Excellenty!Thank you so much!
thanks a lot! worked perfectly
You're welcome!
You save my life 😊!!!
Thank you Very much dear great Job!
Great Work. Thank you sooo much.
Most welcome!
Thank you so much. I am real hero in my dads eyes now😅
IT WORK THANK YOU SOOOOO MUCHHHHHHHHHHHHHHH I SUBBED
Thank you so much this was very helpful and it worked have a good day
Awesome!!! Here worked perfectly!! Thank you so much!! 🙏🙏
You're welcome!
@@rogerwebb9600 i just found out that windows xp media center edition doesn't need activation
Omg you safe my life❤
you can still activate it by phone.
not in all countrys. in poland, its impossible to activate by phone anymore.
@@BoriiSJZyep
Brilliant Thanks
You're welcome!
Hi! Thank you fot this video!! It work perfect!!!
MUCHAS. Muchas gracias.
Could you please paste typeing script here too?
source yourself a volume licence edition, no need for an activation server
Thank you so much it worked
You're welcome!
THis video is a diamond, Thanks a LOT Sİr,
Life saver trick 🙏 God bless you ! 🤗
Thanks for that Roger 👌🏻
Thank you Roger!
does this work on virtual machines?
yep
It's working, thank U so much
Welcome 👍
no way!!! It works!!!!
Totally worked thanks!!!
You're welcome!
Omg thank you so mutch
You're welcome!
Thank soo much
You're welcome!
Thank you kind sir! You rock!
Happy to help!
By George This guy got it! Phew!
Fabulous!
Hello, does this command works infinitely ? Or will it prompt that we can't renew the trial if we use the command too much?
Computer will erase all your files and then explode from inside if you use this command too much.
Been using it for a few months, but didn't work this morning, I usually run it before it hits the activation block. Maybe I messed up the internal clock, gonna wait and try again in a few days.
Great job, thanks
Thanks for watching!
Tks! a very good video, indeed!
Excelente!
Thanks Sir
THANK YOU!
Hi Roger! Excuse-me but Aspire run with XP? Thanks!
You need 64 bit
@@rogerwebb9600 thank you very much but my notebook is only 32 bit! 😥
If one was to wait until 60 days does this mean that it becomes impossible to unlock or would running this troubleshooting in safe mode twice instead of once solve the problem?
Good question, been using this method for a few months, but it didn't work this morning, I will try it again when it gets stuck in the activation again, maybe the internal clock isn't working.
legend!
thnak you matee greetings from istanbul =)
but you must have product key to install
As I have done it it has just given me a error
6-2024 funcionó perfecto
Nope when I press F8 I get SATA:PM - Hitachi and below that CDROM:SM whatever so no safe mode anywhere
press F8 too early goes into boot mode restart press F8 as the window logo starts worked for me
Thanks a lot
No worries!
vouch, it works.
still using windows xp??
It helped first but for somereason it doesnt work anymore :(
It stopped working for me too. Gonna have to find another workaround.
F8 command does not work on my computer.
Thank you So much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You're welcome! remember to do this every 30 days
I like this method, simple and quick fix, I've heard there is a crack program available, but I can't find a link to it. I actually have both legit CD and CD key, it's stupid they also forced to activate online, I'm sure there's no support for that anymore.
Let's get activated because you're a software pirate yay I'm a software pirate that's the best thing you can ask I like piracy🏴☠️🏴☠️🏴☠️🏴☠️😎😎😎😎😎
I don’t have an administrator password need help
reinstall windows
I activated on phone
❤😮
If your system is connected to any form of network there is never a good reason to use XP. It's unsafe.
Hi, many peaple run CNC machines with an Win XP system
Hahahaha nice joke, pal. Windows XP is one of the most stable systems known. Windows 10 is actually a spyware, it is on the EULA.
Can someone help me?
I restart …hold down F8 and I get “stuck key”
F1 to resume
try pressing esc
instead of f8