CMMT-AS with PROFINET and Siemens S7-1500: Setting up SINA_POS block in Siemens TIA portal

00:00 1 Festo Automation Suite: Configuring parameters
00:45 2a Siemens TIA portal: Installing SINAMICS library
01:23 2b Siemens TIA portal: Configuring hardware
03:30 2c Siemens TIA portal: Configuring SINAMICS function blocks
06:30 2d Siemens TIA portal: Compiling program
07:10 2e Siemens TIA portal: Using SINA_POS block with a watch table
Commissioning the servo drive CMMT-AS-PN (PROFINET) with the controller Siemens S7-1500 in the Siemens TIA portal. This tutorial explains how to configure the parameters in the Festo Automation Suite firstly (telegram 111) and continue working in the Siemens TIA portal: here you install the SINAMICS library, configure the hardware, configure the SINAMICS function blocks, compile the program and use finally the SINA_POS block with a watch table.
This video shows the instructions at following products as an example:
Servo drive CMMT-AS-C2-3A-PN-S1, PROFINET, V016.0.9, part number 5340814
Controller Siemens S7-1500, CPU 1515-2 PN
Festo Automation Suite, version 1.2.1.16
Siemens TIA-Portal V15 SP1
CMMT-AS plug-in 1.2.0.25
SINA_POS 5.7
Drive_Lib_S7_1200_1500 V5
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Further information and helpful links
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Application Note
CMMT-AS-PN controlled by SINAPOS functions block with Siemens S7 1500 controller www.festo.com/...
- - -
Festo Automation Suite
www.festo.com/...
- - -
Instructions CMMT-AS-SW
www.festo.com/...
- - -
Festo Support Portal for all further information
www.festo.com/sp
- - -
Festo Website
www.festo.com
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Safety instructions
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
These instructions were created as sample instructions with a definite product configuration. They are only provided as an aid for work on other product configurations; they do not claim to be complete nor correct, but provide non-binding additional information. For this reason, data contained in these instructions do not represent ­guaranteed specifications in the legal sense, particularly with regard to functionality, ­condition or quality. The information in these instructions serves only as basic information for the implementation of a specific, hypothetical application. It is in no way ­intended as a substitute for the operating instructions of the respective manu­facturers. Nor does it replace design and testing of the respective application by the user.
These instructions have been prepared with care. Festo SE & Co. KG does not, how­ever, accept any liability for any errors in these repair instructions or their consequences. Likewise, no liability is accepted for direct or consequential ­damage resulting from incorrect use of the products and tools. Users of these instructions (function and application) must themselves verify that all of the functions described herein also work correctly in the application. Even after examining these instructions and using the specifications contained herein, users are nevertheless solely responsible for their own application. ­Prior to, during and after the work, all the country‘s applicable guidelines, regulations and directives must always be complied with, particularly those governing ­occupational safety, safety engineering and interference suppression, as well as the stipulations contained in these operating instructions (these can be found at ­www.festo.com) and, where applicable, written repair instructions.
#Festo #CMMT-AS #Siemens #S7 #TIA-Portal # SINAMICS #PROFINET