HOW TO INSTALL A PEDESTAL BASIN - Plumbing Tips
Вставка
- Опубліковано 8 вер 2024
- This video will tell you how to mark out and hang a pedestal basin. From measuring out the right heights to successfully installing and finishing the silicone.
🚀 LEARN PLUMBING ONLINE IN MY STRUCTURED COURSE (50% Before March): www.learnplumbi...
🛠 AMAZON TOOL STORE: www.amazon.co.u...
🥾 10% Off my workboots + workwear Use Plumberparts10: www.bigboots.c...
👓 10% Off Safestyle Sunglasses Use PLUMBER10: safestyle.com....
Learn Plumbing Online is perfect for future apprentices, homeowners who want to understand and tackle more plumbing jobs in the home, handymen who keep turning down the odd plumbing job and more. With practical follow along video lessons and discussion board you can boost your knowledge in my amazing trade. Sign up now: wwwlearnplumbin...
**VISIT OUR SPONSORS**
www.traderadiat... | www.stuart-tur...
*Links to the tools I use everyday here:* www.amazon.co.uk/shop/plumberparts
Plus, follow my *Vlog “TimesWithJames”:* ua-cam.com/users/timeswithjames
LOL! The emotions you felt while drilling the tile pretty much sums up every single project I do around the house. Frustration to almost giving up, to pure joy when I get it done.
😂😂😂” come on please” 🤣🤣🤣🤣🤣 oh James you really crack me up
I use Bosch multi construction bits for tiles they are the bomb. For a couple of days at least, well until they go blunt. How about a vid on concealed WC cisterns. Keep up the stellar work PP!
As much as I love these videos, I'm afraid the dog at 4.40 stole the show for me.
just started an apprentischip an your vids are helping me out soo much thanks a lot mate :D
Oh I hate to see a grown man cry!!! Since I like you & you're a good sport James auld son. Join Ultimatehandyman Plumbing Forum, this is the best on-line forum. Go to the FAQs & read my tips on drilling porcelain tiles, it makes it a walk in the park!!
Don't forget to donate to Donna's House all you tight gits!!!
Big up the Glasga Posse!!!
watched a few and this was by far the best
Cheers dude, glad to help! SUBSCRIBE! ➡️👉 ua-cam.com/users/plumberparts 👈⬅️if you haven't already!
You make it look so easy ! Thanks for sharing this great tip.
You and this video were a HUGE help.... thank you !
Thanks for putting the video up mate..very helpful
Yo you give me jokes lol u make plumbing look effin good.
What is your strategy on hiding pipes / waste, when you fit the pedestal sideways? (i..e when you enter some bathroom, you see the basin / pesdestal on the side and you can see all those pipes). When these pipes are old, people paint them over... it does not look nice. Just wondering what are your ideas?
Hi I think your brilliant with all your helpful videos but this 1 I would use aqua seal as used for fish tanks as it is much stronger
I know what you mean about those tiles,many years ago i was fitting a cloak room out and need to drill ten holes,and used 10 of those drill bits the tiles were that fecking tough ,the tiles came from spain,1 hole 1drill bit NIGHTMARE of a job
Good tip for drilling holes in tiles on floor. put a ring of Blu-Tak/plastercine around hole-to-be-drilled, fill with water, drill! (Fuck only knows with holes in walls!)
Keep it tight, braaapppppppp!
ive found if u put the gun on about half speed the blades on the tile bit cuts and clears far better and doesnt heat as much
I did have a discussion with a workmate about how to use the Bosch tile drill bits. Anyway,
I phoned Bosch and they did say as you have said, keep your drill on slow speed but they also insisted that you should NEVER dip them in water, drill for 10 seconds at a time and completely stop drilling for 4 to 5 seconds before continuing. I use their advice and my drill bits are still working well. Had them nearly 4 years now.
What's the crack at 6:40???? Hold tight!!! Keep the vids coming boooooommmmm.
There's my sunglasses! Give 'em me back! :P
As far as the drilling goes, how 'bout a squirt bottle while drilling (much slower bit speed would be very beneficial - ceramic is a metal...)?
Also, for very hard tiles, use the same approach as above for breaking the glaze, then continue with a hammer function (hammer drills are normally slow revs).
+Technishun Agreed!
What type of screws did u use to fasten to wall? And what type if washers?
You look like Bradley Cooper in those glasses 😉😁
Sorry I can't edit my post, it should read Top Tips in the Plumbing Forum on Ultimatehandyman.
How do you do if the floor is not leveled? What can you put under the pedstal to make it even?
Another great vid, thanks, but Jack definitely stole the show. Get him on the payroll, even if you only pay him in Bonios! ;-)
what did the screws cling to that went threw the basin and into the tile?
Have u tried using ceramic drill bits?
hello mate, can I install a pedesal basin first and bathtb later on.
Show the drain connection
Far be it for me to offer advice to you. However, for porcelain tiles the only way I have found to drill them easiest is to use diamond cores 6 or 8mm. They can be expensive. But, I buy a pack of 10 cheap ones from eBay (£5.00 or so) and they work well. I buy a pack per job and use a bit per hole as they are cheap. You do need to buy or make a jig to start you off.
+Gary Cox Cheers Gaz will give it a try!
unless the jig is cheap ,which they normally aren't you could just use an off cut of timber with the correct sized hole to drill through onto the tile, always bits of timber on the van. Side note anyone tried the Bosch multi construction bits? Oh and make sure you don't have hammer on when drilling.
What about showing how to install a 'U' Bend and Waste Pipe down through the floor alongside the water pipes - also coming up through the floor,,,!!!
The idea would be to 'hide' the Waste Pipe and the Water Pipes 'inside' the Pedestal so they don't show,,,,!!!
How would you do that,,,,???
I always just silicone my basins back to the wall easy to level and quicker install. Guaranteed to be a solid fixing as well.
I do both mate. You never know when some old dear is going to use it as a hand rail!
+plumberparts Haha hand rail, Quality.
Wat is dat silicone tool your using?? Have never cn dat!
How much would you charge to customer to do this job
If you get a blockage in the U pipe, how to access to the U pipe mounting...?
Thanks
Under the sink mate, all ready to be removed!
Some plumbers putty the top of the pedestal and lower the basin on to it to bed it in then trim the putty with a knife. They do silicone around the base, however (floor) to stop water ingress.
Them tiles are very very hard because they are porcelain.
Something erotic about the way you kept pumping the drill in to that hole! Haha!
lol Bosch drill bits suck. I've had nothing but trouble with them. They dull out to fast.
True mate! SUBSCRIBE! ➡️👉 ua-cam.com/users/plumberparts 👈⬅️ IF YOU HAVEN'T ALREADY! 😎
Absolute rubbish. They aren't even made by Bosch. Made in China and sold cheap as shite to Bosch who brand them. Standard masonry bits are 10 times better.
More exasperating is when after 15 minutes drilling, the bit suddenly flies straight through into a totally useless void in the masonry. Not critical for a basin on a ped, but for an over bath shower screen or a tall ladder rad GRRRR
+mark rainford On another note. Have you not used those cheap chinese diamond bits? Cheap enough to buy 10 at time, and I can get 6 holes in hard porc.
+mark rainford Hmm I'll have a look into them. Feel your pain on the walls too!
+plumberparts I recently had the same problem trying to drill hard tiles with a new masonary bit. then I came across these diamond coated core style drills which worked a treat! www.amazon.co.uk/Sourcingmap-a13112000ux0417-Diamond-Coated-Ceramic/dp/B00N41IY2I/ref=sr_1_3?ie=UTF8&qid=1459376053&sr=8-3&keywords=6mm+tile+drill
字