Putting a Motorbike Engine in a Car Gearbox | Off road buggy Project part 1

Поділитися
Вставка

КОМЕНТАРІ • 462

  • @999benhonda
    @999benhonda 3 роки тому +102

    Good skills, but I'm honestly more impressed by their ability to cut, grind and weld while wearing sandals

    • @eddier9455
      @eddier9455 2 роки тому +4

      I be more impressed if he knew how to weld.

    • @mrkhainuui
      @mrkhainuui 2 роки тому +3

      nothing special in that :D i do it quite often. freaking hot here in thailand.

    • @eddier9455
      @eddier9455 2 роки тому +2

      @@mrkhainuui Just annoying when chipping slag off weld and it goes between the toes.

    • @FarmsVilla
      @FarmsVilla 2 роки тому

      At least they were wearing gloves. 🙄🤣🤣

    • @scootersonlyrepair510
      @scootersonlyrepair510 2 роки тому +2

      I do it in shorts and flip flops I'm in California

  • @666thebmxkiller
    @666thebmxkiller 4 роки тому +13

    Lots of respect considering what part of the world you live, and possibly what little you have, you make the best of it.
    Best DIY EVER ♥

    • @thebear6529
      @thebear6529 3 роки тому +2

      Excuse me? You might wanna re word your comment

    • @ambread1
      @ambread1 2 роки тому

      @@thebear6529 why for a 6th world country your doing good.

    • @Iwishitwas-hl9wj
      @Iwishitwas-hl9wj 2 роки тому +1

      @@thebear6529 you friggen people!

    • @estherorbe5635
      @estherorbe5635 2 роки тому

      @@ambread1 atleast in their world they are not chlidrens killing anothers childrens at schoool , and not homeless people using cocaine all day.

  • @johnlewis9222
    @johnlewis9222 2 роки тому +8

    Good work guys I'm intrigued was hoping to get a part two and a continuation until the finished creation 🤷🏽‍♂️

  • @robertweitlauf4653
    @robertweitlauf4653 3 роки тому +8

    need to turn the wire speed on the welder down. backyard engineering is great. videos like this are very entertaining.

    • @stefselby
      @stefselby 3 роки тому

      More like more amps 👍

    • @robertweitlauf4653
      @robertweitlauf4653 3 роки тому

      more amps will just blow holes in everything.

    • @stefselby
      @stefselby 3 роки тому

      @@robertweitlauf4653 sounds like you need practice mate

    • @robertweitlauf4653
      @robertweitlauf4653 3 роки тому

      @@stefselby i have been a welder for 40 years, how about you. i started welding before wire feed became popular.

    • @stefselby
      @stefselby 3 роки тому

      @@robertweitlauf4653 of course you have sonny

  • @fareast5574
    @fareast5574 4 роки тому +2

    Good day all of you sir. You are so helpful to our people..thank you sir to you video.👏👏👏👏

  • @Gu1tarZer0
    @Gu1tarZer0 4 роки тому +14

    I love the rubber welding gloves, feels great when it gets melted to your skin.. ask me how I know..
    also crank that wire speed up until it's cackling smooth like frying oil
    wait what you put a gearbox on a gearbox so you can shift while you shift?

  • @zachary6313
    @zachary6313 4 роки тому +7

    Please turn your wire speed up a bit, you'll get much cleaner and better lasting welds.

    • @Wbroach24
      @Wbroach24 3 роки тому +1

      I don't weld yet but, have been watching videos as I'm fixing to buy a good starter welder. I'm glad my first thought was right 😁

  • @aravindasms
    @aravindasms 4 роки тому +3

    U guys seem to have a lot of gears 36 or so wonderful craftsmanship.........

    • @airotechuk7261
      @airotechuk7261 3 роки тому

      Except they're not going to select any of the gears from the bike engine because they put a gearbox in the way of the engines selector shaft, that was just clutch drag turning the output shafts did you notice he stopped it with his hands 🤣

  • @tweekedxxii2270
    @tweekedxxii2270 3 дні тому

    Friggen awesome 👍🏼👍🏼👍🏼👍🏼

  • @goesnatural
    @goesnatural 3 роки тому

    Kreasi yang bagus ...salam sukses dan semangat berkarya

  • @HEAVYMETALJSTYLES
    @HEAVYMETALJSTYLES 3 роки тому +2

    Excellent for trail buggy, Pretty cool 💡.

  • @marcelomachadosouza5601
    @marcelomachadosouza5601 3 роки тому +5

    Esse foi um projeto perfeito, um dia irei conhecer vocês pessoalmente... forte abraço!

  • @justonnie
    @justonnie 4 роки тому +44

    So your gearbox has a gearbox?

    • @MrTheHillfolk
      @MrTheHillfolk 4 роки тому +3

      We heard ya like gearboxes yoe😁

    • @akumabito2008
      @akumabito2008 4 роки тому +5

      @@MrTheHillfolk ...so we put a gearbox on your gearbox so you can shift while you shift!

    • @MrTheHillfolk
      @MrTheHillfolk 4 роки тому +3

      @@akumabito2008 I love shifting.
      And then shifting again on another transmission.
      And then shifting the first one again.
      Gettin all shifty y'all 🤣🤣

    • @mrbumcraic5046
      @mrbumcraic5046 4 роки тому +8

      It’s like a 5 speed with hi and low range but also has low medium, medium, hi medium and nearly hi range

    • @ryanrotten8595
      @ryanrotten8595 4 роки тому +2

      That's set up is not meant to shift both of those transmissions while driving obviously. The bike engin is for shifting gears the transmission for selecting a gear ratio for your proper terrain at hand .

  • @davidtappe5337
    @davidtappe5337 3 роки тому +11

    The projects we come up with because the junk is laying around. Useless engineering, great entertainment.

  • @ryanrotten8595
    @ryanrotten8595 4 роки тому +7

    Nice job guys im loving what I'm seeing

  • @shanerichardson9568
    @shanerichardson9568 2 роки тому

    This is actually genius! Brilliant work brothers! 👏🏻👏🏻👏🏻

  • @RyanProoject
    @RyanProoject 3 роки тому

    Good job

  • @underdogmelting6058
    @underdogmelting6058 3 роки тому

    Clever engineering bet thats like a rocket when inplace

  • @verigone2677
    @verigone2677 8 днів тому

    Farm Enginerding is my Favorite. For the record Farm Engineering refers to the tooling level available to the project, not a lack of skill or understanding...usually these types of modifications, using standard tools and Maybe a lather or and old ass barely functional bridgeport, happen every day on a farm to keep things moving. These fellas take it to whole new level, fantastic...it ain't gorgeous, but it will definitely work and there is no way the engine is going to blow up that beefy trans...meaning you can blast the shit out of the throttle all day long...or at least till the head gasket pops.

  • @jamescunliffe9872
    @jamescunliffe9872 4 роки тому +3

    I like the technique of directly building off another component instead of running bacwards and forwards with a pen:)

  • @nosaj0026
    @nosaj0026 4 роки тому +4

    Love there safety boots i just finished work safety course lol watching these guys lol 😆

  • @manitobaman5588
    @manitobaman5588 3 роки тому +1

    That is a smart approach guys. Good work.

  • @maianbaaii
    @maianbaaii 4 роки тому +1

    wow.. double gearbox.. owsm😁👍

  • @yetti423
    @yetti423 2 роки тому

    Are those steel toe cap sandals? would like to buy some...................sweet skills

  • @All-Spark-Interactive-Sl
    @All-Spark-Interactive-Sl 4 роки тому +1

    You srilankan 🇱🇰 .proud of you brother

  • @danielmadrid838
    @danielmadrid838 9 місяців тому

    I was waiting for the car installation. Would have been nice to see it through

  • @EdgarHernandez-yx3lz
    @EdgarHernandez-yx3lz 3 роки тому +1

    Good build yoo with vetter equipment you would be able to create professional high end custom sports vehicles

  • @simonbertioli4696
    @simonbertioli4696 4 роки тому +2

    From the local resources you have completed a great project...
    How many gears are there now...😆👍
    Well done...be proud of yourselves and l hope the bike clutch lasts👍👍👍

    • @racistrobinhood
      @racistrobinhood 4 роки тому

      At least 4x4=16 gears but could be as many as 6x6=36 gears 😂. Cant wait to see end of part 2 or beginning of part 3 when they realize they need 2 SEPARATE CLUTCHES. Only way around it is to lock the driven gearbox into a single gear. Lmao

    • @ravinloon7106
      @ravinloon7106 4 роки тому +1

      Also going to have several reverse speeds

    • @racistrobinhood
      @racistrobinhood 4 роки тому

      @@ravinloon7106 lmfao i totally forgot that. But now im thinking high and low gears also. 😱

  • @Ricerguy
    @Ricerguy 4 роки тому +8

    Haha.... I recognise the gearbox, now I'm tempted to put a bike engine in my car 🤣👍🏾

    • @theideasman6018
      @theideasman6018 4 роки тому

      What is it OFF

    • @Ricerguy
      @Ricerguy 4 роки тому +3

      @@theideasman6018 4 speed from a Toyota starlet

    • @___Eldritch
      @___Eldritch 3 роки тому

      You'll immediately regret it. This thing makes no power. I can't understand why they didn't just make it direct drive. This thing has 2 gear boxes now so the first gearbox is going to have to get the second one up to speed by shifting through all the bikes gears before the other one can shift into second and you'll need to shift all the bike gears back down to compensate for the now larger gear ratio before you can attempt to accelerate again and by that time your rpms have severely dropped and you'll have to start all over again. This make no power, and has zero speed. You might be able to go through all 24 gears if you go downhill and let gravity do everything.

  • @skyrunnerlawnandservicellc4966
    @skyrunnerlawnandservicellc4966 4 роки тому

    I just came across your project! I am currently putting a 1100cc motorcycle engine in my toro Groundsmaster snowblower. I am going with hydraulic drive though.

  • @raymondatkins991
    @raymondatkins991 3 роки тому +1

    What transmission is that? Awesome job love it. Thanks for the ideas.

  • @XS650Chop
    @XS650Chop 4 роки тому +12

    So this will have high range, slightly lower range, mid range, quite low range and low range! Excellent! What's not to like? 🎉🎉🎉😁💥🎆

    • @kramnal13
      @kramnal13 4 роки тому +5

      And 6 speeds in reverse.

    • @endarsinghdeosingh543
      @endarsinghdeosingh543 3 роки тому

      Gearbox shaft needs abearing sopport to dampen shaft vibration.

    • @___Eldritch
      @___Eldritch 3 роки тому +1

      This thing will top out at 55mph if you put it on a car. Maybe 45

    • @Thundarr995
      @Thundarr995 3 роки тому

      @@___Eldritch and it'll take about 10 minutes to get to that top speed. 🤣

  • @Intergalactic2000
    @Intergalactic2000 3 роки тому

    Good work guys don't bother with haters .

  • @antonyiodice5351
    @antonyiodice5351 2 роки тому

    Inspiring much 😎👌🤙

  • @samsonmichael3284
    @samsonmichael3284 4 роки тому +3

    Sir it's awesome project ,can u tell me what bike engine and which car gear box u have used for do it because I am planing to do the same with Royal Enfield and Nissan Datsun go

  • @w.fezzani2893
    @w.fezzani2893 4 роки тому +6

    Hello, it's a great project, well done! Do you keep the motorcycle's clutch and the car's clutch? 🤔 Bravo again👍🏼

    • @tyronlachapell6034
      @tyronlachapell6034 3 роки тому

      I would like to know aswell

    • @Iwishitwas-hl9wj
      @Iwishitwas-hl9wj 2 роки тому +1

      Just the motorcycles clutch that’s why this would never work, you would need to swap the clutch everyday

  • @llewvirtue861
    @llewvirtue861 3 роки тому +1

    Well done good job, high and low range

  • @dabtech7456
    @dabtech7456 4 роки тому +40

    Need to turn turn up your wire speed on the welder that shit was popping all over the place

    • @jeremyrock9305
      @jeremyrock9305 4 роки тому +1

      I said the same thing

    • @racistrobinhood
      @racistrobinhood 4 роки тому +1

      I dont think hes using gas...

    • @racistrobinhood
      @racistrobinhood 4 роки тому

      Now i hear it lol.

    • @joshcoffman14
      @joshcoffman14 4 роки тому +2

      needs to clean up the metal were he is welding

    • @sketabug1259
      @sketabug1259 4 роки тому

      Lol even with no gas that wire speed needs turned up. but hey to each is there own. You just might get a lot of criticism from the pros and/or amateurs.

  • @Faraday73
    @Faraday73 4 роки тому +3

    Мы сделали коробку для мотора с коробкой что бы ты мог переключать коробку когда переключаешь коробку) искры в карбы летят прям) кулибины. Сварочный не варит) за то кардан серебристый красивый 😀👍👍

    • @Shaitan37rus
      @Shaitan37rus 4 роки тому

      Они походу без газа варят

  • @boltonky
    @boltonky 4 роки тому +3

    Good video and interesting way to do it

  • @poke12gauge32
    @poke12gauge32 2 роки тому +1

    Im rather confused they put another transmission on it? Are they planning to utilize both somehow?

  • @charlesg.8615
    @charlesg.8615 2 роки тому +2

    Very good!
    Now you have 2 transmissions in 1 !😅

  • @Grizzlyowner89
    @Grizzlyowner89 4 роки тому +2

    Using a chop saw with sandals nice

  • @nathanhansford76
    @nathanhansford76 4 роки тому +3

    Listen to all the welding experts saying, turn up the wire. Lmao. A mig welder spits like that when the wire is turned up too much or the surface isn’t clean. The wire doesn’t have the chance to melt into the puddle so it spits all over the place. Either the wire feed turned down or heat turned up.

    • @codyparker679
      @codyparker679 3 роки тому

      I was thinking the same or with a lower power supply.you have to do this sometimes which I imagine is the issue

    • @merida1605
      @merida1605 3 роки тому

      Exactly what I was thinking. Couldn’t believe I was reading “turn the wire speed up”. Total bullshit. 😂

  • @michaelmays9292
    @michaelmays9292 2 роки тому

    You guys are good but need to turn up the heat on your welder

  • @sachinfernando8292
    @sachinfernando8292 4 роки тому +1

    Supiri aiye🖤🔥

  • @wernopurno
    @wernopurno 4 роки тому +6

    You need to adjust the wire speed of your welder

    • @BOOYAGA
      @BOOYAGA 4 роки тому

      Seems like the only benefit would be reverse, I would rather go with a reverse gearbox and keep the sequential if that's the case. If reverse isn't needed, then I would just go driveshaft-spline 🤔

  • @diybro8442
    @diybro8442 3 роки тому

    Hey id like to know wht vehicles transmission is that , awsome video

  • @ChengDIY
    @ChengDIY 3 роки тому

    Very cool bro . Keep it up

  • @rexhorning7228
    @rexhorning7228 2 місяці тому

    I’m not for grind and weld videos. I want to know your plan how you are going to attempt building it. The engineering side and outcome of your work.

  • @richie9777
    @richie9777 4 роки тому +14

    So you will have to change gear on the engine and on the gear box?

  • @edwinhadisaputro6331
    @edwinhadisaputro6331 4 роки тому +2

    So It is double transmision.. nice😂😂

  • @CakMadHudiLamongan
    @CakMadHudiLamongan 3 роки тому

    nice idea

  • @timmyers3849
    @timmyers3849 3 роки тому +15

    Now he can have a gear box like in fast and furious.

    • @jordansbikes819
      @jordansbikes819 3 роки тому

      Old truck gearbox lol

    • @airplanehigh7088
      @airplanehigh7088 3 роки тому

      He meant now he has 11 gears

    • @jeffreymoffitt4070
      @jeffreymoffitt4070 2 роки тому

      @@airplanehigh7088 nope, actuality a lot more. If the bike has 5 and the trans has 4 then theres like 20 gears 1-1 to 4-5 lol plus r-1 through r-5 lol

  • @midixiewrecked7011
    @midixiewrecked7011 4 роки тому +6

    I like the parts where they use eye protection with the grinder but they're wearing flip-flops on their feet. Pure comedy.

    • @dafily1697
      @dafily1697 3 роки тому +5

      we're wearing always flip-flops in our tropical areas !! walking, cooking, even at job time, night and day and at mechanics too, not a comedy but a way of life bro !

  • @rider68-12
    @rider68-12 4 роки тому +1

    I like the concept, so you have high, low, 2 and 4 wheel drive plus reverse. Like a previous comment is like have 2 transmissions or 10 speeds.
    Could you have come directly off the engine and drive the other transmission directly?

  • @Truck_video
    @Truck_video 2 роки тому

    good work gays...

  • @simplemangarage6858
    @simplemangarage6858 4 роки тому +4

    Muito Bom, um Abraço do Brasil !

  • @BHENTECH
    @BHENTECH 3 роки тому

    nice vids sir

  • @okkenskyvrecky5302
    @okkenskyvrecky5302 Рік тому

    I love your innovation and i need your help how to put two motorbike engine to work together on the same time same speed and same high dren in the same case

  • @SpikerDragon95
    @SpikerDragon95 3 роки тому +5

    Well you gonna have a twin stick car, one sequential for the bike transmission, and a H pattern for the car transmission

  • @BiztoryTime
    @BiztoryTime 11 місяців тому

    Awesome safety flip flops

  • @boostedred_473
    @boostedred_473 2 роки тому

    Ur wire speed is too slow for the amperage ur welding at. Just a tip. Great job

  • @AlminCreator
    @AlminCreator 3 роки тому

    Nice👏👏👏👏👍👍👍

  • @sandasturner9529
    @sandasturner9529 2 роки тому

    This is so much ROCKSTAR 🤟
    It looks like a gas powered machine gun!

  • @GDEVADASEN
    @GDEVADASEN 3 роки тому +1

    Very good work, did you do part 2

  • @davidthompson245
    @davidthompson245 3 роки тому

    That's an interesting spray gun there.

  • @bigtool4088
    @bigtool4088 3 роки тому

    Won’t work properly coz it’s got the bike gearing witch is geared to bike sprockets like 16 front and 42 rear then add the 5 gears from a car gearbox witch is set up to a engines power way to much stress on the wet clutch plates won’t last a day ,nice work cant take that away 👍🏻🇬🇧

  • @MrPlumber27
    @MrPlumber27 20 днів тому

    How the hell are you welding that transmission housing to that steel ? I thought those housings were cast aluminum?? Great flip flops 😂😂
    Turn that wire speed down !!

  • @pranabjyotiphukon6242
    @pranabjyotiphukon6242 3 роки тому +1

    I think you should try to fit a motorcycle gearbox in a car engine and make a powerful motorcycle.

  • @crazymtbrider
    @crazymtbrider 3 роки тому

    Double wammy!!you got a spare gearbox in the tool kit under the seat just in case 🤣

  • @oswaldolopezzarazua3092
    @oswaldolopezzarazua3092 4 роки тому +1

    Cómo hicieron para que el motor fuera libre... Eliminar el embrague.??

  • @tjc9431
    @tjc9431 4 роки тому +21

    Seems like every guy that can make something cool out of junk is always wearing flip flops or sandals

    • @JoeyGarcia
      @JoeyGarcia 4 роки тому

      The irony is that he was wearing gloves to protect his hands. LOL

    • @kyzor-sosay6087
      @kyzor-sosay6087 4 роки тому

      Flip flops and sandals are for safety.😂

    • @codyparker679
      @codyparker679 3 роки тому

      In florida we wear crocs lol but this is what they have laying around. You want it you make.it

  • @Luzviminda777
    @Luzviminda777 3 роки тому

    That welding makes my skin crawl . " more power "

  • @sicks6six
    @sicks6six Рік тому

    Needs a smaller gearbox and bell housing no BHP will come out the drive side of it. Try one from a shaft drive motorcycle like a Kawasaki GT etc. The one you have used is to big. Lots of technical reasons why you should not use it but I won't bore you with science..

  • @w.fezzani2893
    @w.fezzani2893 4 роки тому +11

    How do you change the gears of a car transmission? It's interesting ☺️

  • @roncastro8654
    @roncastro8654 3 роки тому +2

    How can you synchronized the motorcycle and gearbox shifters?

  • @surplusstock8778
    @surplusstock8778 2 місяці тому

    What would be the best gearbox for yamaha r1 engine?

  • @dayanammuniarachchi4389
    @dayanammuniarachchi4389 4 роки тому +1

    සුභ පතනව ජාත්‍යන්තරයට යන්න ලංකාවෙ චැනල් එකක්..

  • @FLATLANDERHUNT
    @FLATLANDERHUNT 4 роки тому +3

    You guys need to turn your wire speed down on the welder. 👍

  • @vitomartinez3193
    @vitomartinez3193 2 роки тому

    I like the idea!

  • @indigenousonlooker3793
    @indigenousonlooker3793 3 роки тому

    Sorry you need to sett up your MIG welder a bit better may be a bit more wire speed

  • @ewom65858
    @ewom65858 3 роки тому

    More shift like a truck Mack jajaa!!!

  • @89StarquestTSi
    @89StarquestTSi 3 роки тому +1

    I mean that automotive transmission only needs to be turning 750-1000rpms at idle for the oilling system to work and even spin fast enough to turn the output shaft of the automobile transmission even a few rpms... I doubt the output shaft of the motorcycle transmission isnt even close to that at idle. I know my last 3 bikes came close to 1000rpms on the motorcycle output shaft but that was in 6th gear around 130mph give or take
    Gear reductions and ratios are important mathematical variables.

  • @austinreynolds5702
    @austinreynolds5702 3 роки тому +5

    Turn the speed of your wire up you'll get smoother beads

    • @killerconsoles517
      @killerconsoles517 2 роки тому

      Although only a hobbyist the sound of the weld can tell you a lot, it's either slow wire speed as you said or not cleaned the surfaces properly.

    • @michaeldvorak5556
      @michaeldvorak5556 2 роки тому

      I'd go with poor ground.

  • @ezequielsilva2709
    @ezequielsilva2709 4 роки тому +2

    Muito bom! 👍👏👏

  • @exogator
    @exogator 3 роки тому

    My only criticism is that you need to adjust your welder because your wire speed is to slow.

  • @thewonderfulmotivationalwo1737
    @thewonderfulmotivationalwo1737 3 роки тому

    *Outstanding*
    *Blessings Forever God Bless You All* 🌼💞💖💝💝😃😃

  • @ray1965ify
    @ray1965ify 4 роки тому +2

    Welding outside with a wire welder and wind blowing will cause a lot of spatter.when your shielding gasses are blown away. dosent matter if you use flux core or aragon .

    • @XS650Chop
      @XS650Chop 4 роки тому +1

      Have you heard about Catherine of Argon?

    • @kwgrinnell
      @kwgrinnell 3 роки тому +1

      @@XS650Chop She welds armor suits.

  • @hartle100
    @hartle100 4 роки тому +1

    Before starting a project like this you should improve your welding skills, starting with the proper adjustment of the welding equipment.

    • @zadvindersingh4234
      @zadvindersingh4234 4 роки тому

      Agreed 100%

    • @robertrose1098
      @robertrose1098 4 роки тому

      I'm agreeing with you completely and you point out a valid point...... but I think because of were these people live,,,a tiny bit of the spool of wire would be a big deal,, they cut corners everywhere but come up with some amazing things,,, and ways of doing things 😗.....I seen one man cutting corrugated iron with a cut, with the axe🙄 and a quick rip across the sheet,, and made allmost perfect every time?????!! Nessesaty the mother of all invention???

    • @volvogt21
      @volvogt21 3 роки тому

      @@robertrose1098 if you want to look like a legend then start your corrugated iron cut with a blade. Then stand beside it and give it an almighty yank. It tears very easily over the length of a sheet

  • @ClassicRider
    @ClassicRider 2 роки тому

    Are you also assuming the Transmission that is in the Bike Engine itself?

  • @chucklanman3315
    @chucklanman3315 4 роки тому +1

    If you clean up your steel plates they wont pop and splatter your welds.

  • @DeepakKumar-ow5mb
    @DeepakKumar-ow5mb 3 роки тому

    Bro which engine and gearbox you used and the gear shift up and down without clucth

  • @stevenleslie8557
    @stevenleslie8557 4 роки тому +3

    As soon as I saw the sandals on their feet I knew this was probably southeast Asia or India.

  • @hectorargarate7333
    @hectorargarate7333 2 роки тому

    So do you have two transmission?🤔

  • @BUILDNIGHT
    @BUILDNIGHT 3 роки тому

    Do you leave the motorcycle engine transmission in high gear and only shift the car transmission?

  • @joshuahalla.k.a.controlla6333
    @joshuahalla.k.a.controlla6333 3 роки тому +1

    Great video. ☺
    Edit: I just subscribed to ur UA-cam channel.

  • @lhawoekcreator
    @lhawoekcreator 10 місяців тому

    Very good

  • @billspooner3792
    @billspooner3792 Рік тому

    What about the flywheel an pressure plate an clutch plate spicker bearing an thrust bearing?

  • @rifleman7313
    @rifleman7313 2 роки тому

    Do you think that something similar could be done with a Hayabusa engine? I would like to put a high peRoadster. (400HP +) Hayabusa into a lightweight roadster. Thanks in advance for any and all thoughts, advice, opinions, or answers.