EASY way to Link DMX Lighting to the Numark Mixstream Pro using SoundSwitch
Вставка
- Опубліковано 22 лип 2024
- I this video, I show the easy way to link up your DMX lights to work with the beatgrids of any track on the Numark Mixstream Pro and SoundSwitch.
- Фільми й анімація
Thanks so much for shooting this vid, I was struggling to find a video on setting this up and this stuff is very foreign to me... finger crossed I can get it to work.
bro I had the mix stream pro for 3 months before I even knew it had dmx capabilities. Thank you so much man, this is incredible.
Yeah, it's crazy how powerful it is when it comes to controlling DMX lighting
Just picked up a Mixstream Pro! Thinking of transitioning from Pioneer to Denon and the MP is a great way to get my feet wet, I am new to SS with the Control One too! Thanks for the video!
Thank you very much for the video! This is what I needed and looking for. Very nice presentation ánd explanation 🤟😁
Glad it helped!
wow fantastic, thanks for sharing!
Thanks Jake great video, One quick question: what happen with MARQ kighting?
are you able to use sound switch to controll dmx machines such as stage flames or c02 machines i have been looking for an answer but have yet to come across anything
Thanks Brother for this Video this was exactly what was missing …. I’m using Tidal as streaming and works great 👍🏻 with my lights
Awesome, good to hear!
Where do I get the Dongle, and will it work in computer mode or is it only for stand alone use?
Can I only use the Sound Switch Program ona PC?
Que hay que comprar yo tengo el controlador pero no se como.se usa con las luces
Thank you for this video. I have been waiting for the dongle and it's finally on its way to me.
Question: can I connect all of my equipment in a daisy chain using the smartswitch USB to DMX cable and the connect all other equipment using a regular DMX cable or wpuldmi need to buy additional smart switch DMX cables?
Also. Can I use a wireless adapter to connect gear that's across the room or do I have to use a physical cable?
I'm Totally new to DMX. I've usually just used the auto function with everything.
Thanks.
You can use regular DMX cables to connect your lights, the dongle just needs to be first in the chain (coming out of the back of the Mixstream Pro), you should be able to use a wireless DMX adapter as well.
Nice
do you know if they are planning to have a firmware where you can disable the crossfader and just use the line fader
Not sure on this one, in the meantime, I would just recommend leaving the fader in the middle
Thank you Jake for this video. In my case as a musician, I need my hands to play the guitar. That means... "music and lights" working completely independent of (from) me.
So... i would have... lets say, a strip of 20 songs (different beat, one after the other with silence in between). Can I design 20 lightning "set ups" within that strip of songs.?
I know probably Ableton or footswitches would be better options for musicians.... but If i could do this all automatic with the Mixstream (with no computer either..)...man....it will be great.
I do Dj too..,but ...not my priority for now..!! Anyway....Thank you again.
Eric
Yes, if I'm understanding your scenario correctly, this should work just fine. You could save it all as one track, then edit the lightshow with SoundSwitch on your computer. Then, when you export the track with to an SD card, the light show will be attached to the file and play automatically when you play the track on the Mixstream Pro. Or, you could just save them all as separate tracks, use SoundSwitch to autoscript the tracks, and then pull them up as a playlist on the Mixstream Pro.
Thank you for this video! Did you connect the Soundswitch cable directly to the DMX lights or do you have a DMX controller? I have seen the Soundswitch cable for sale but it looks extremely short. Just wondering how you have your physical connections.
@@AndyMontgomeryPiano the SoundSwitch cable is a dongle that plugs into the Mixstream with a usb on one side and a DMX connector on the other side. I have a longer DMX cable that goes between the dongle and the first light, then DMX cables connecting all of the lights with each other.
@@bpmdjpro Hi Jake, thanks for the quick response and explanation!
Can it use aftermarket Dmx / usb? Sound switch cable is back ordered
No, only the official SoundSwitch cable, you can use the new SoundSwitch Control One with it though, that is currently available
Hello. Can you use it directly with the mixstream pro? Without the software from the laptop?
You can connect to Philips Hue lights wirelessly from the Mixstream Pro without a laptop, but to control multiple DMX fixtures, you need to add them to a "Venue" in SoundSwitch on a laptop so that the Mixstream Pro has all of the light information (number of channels, DMX address)
Wait.. so if I have a flash drive in the mixstream for music and a dmx cable plugged into the other usb.. how could I use another usb for lights?..
Where is a special USB port for dmx lighting in addition to standard ports
What interface do you have between the Mixstream console and the DMX lights?
SoundSwitch Micro DMX - www.soundswitch.com/microdmx.html
Unfortunately, not everything is as simple as described in the video :\
I have the same console and interface, but a different lighting effect: Stairville All FX Bar. Following your instructions, my light effect doesn't react at all to Numark commands :( In one of the groups, someone told me that I should set Attribute Cues in SoundSwitch, but I don't know which sliders to move and what values to enter. Any hint?
Exactly my issue
Jake question for you.
I have the mixstream Pro and I also have the Philips hue lighting‘s three of them and I have a hub and I travel a lot for work i.e. in hotel rooms where I cannot access the hotels router or gateway and a half mostly connected to the Internet by Wi-Fi I’ve purchased a extender which has a ethernet in Out port and the Wi-Fi will not be on the same network because the ethernet is a wired connection so I was wondering if you knew how I could access my Philip hue lights with my mixstream pro in the situations where I cannot access the gateway from the hotel or be on their private net work and I just am trying to get by so I can do some streaming and performances when I’m bored in the hotel and utilize all the stuff that I have to make it a little more exciting so if you could please help me with any kind of information on this obstacle I’m trying to hurdle that would be great thank you.
Thank you
Ian Mani DJ for 30 years and just now getting into lighting after purchasing them mixstream pro
I can't think of any solution for Philips Hue when you can't access the router, one solution that I can think of would be to buy some cheap DMX lights and use a SoundSwitch dongle with the Mixstream Pro instead like in the video.
I bought the mixstream pro and the soundswitch dongle for home for house parties. I see that the dongle comes with a 90 day subscription to soundswitch. Can I create a few lighting profiles, put them on a thumb drive and use them forever on my mixstream pro? Or does the mixstream require an internet connection to verify I have a current license of sound switch every time I want to use dmx lights at home? Ie after my free 90 day subscription ends.
I'm not 100% sure on this, but I think you might be ok. If it does work, you'll only be able to use those lights with Auto Loops and the overrides on the controller since you won't be able do any custom scripting or auto scripting. Only one way to find out!
You need to pay a monthly subscription for soundswitch or buy a lifetime license, you would be be better off paying the money for the lifetime one.
thanku thanku thanku
so I followed this, added my chauv swarm fx ils (1-18) and intimidator 110 (19-30), exported to usb, loaded it on numark easily but my lights do not function correctly at all. I have set the correct starting channels on each light and connected correctly. what am I doing wrong? do I need to add automations to tracks, I presumed this will be automatic.
I would make sure that you are selecting the correct Soundswitch project on the USB like at 7:11 in the video. You shouldn't need to add automations if you don't want to. You'll know if everything is working if the color override onscreen controls change the color of the lights when pressed.
I tried just adding one new project with one light and the same issue. Maybe it’s the cable. I’ll keep trying. A group said I have to add automations and auto loops?
@@bpmdjpro did you analyse all tracks in the software first so it adds ss data to each track? Then import them to mixstream?
@@JasonLTate I don't think so, I know that it's worked in the past on other devices without analyzing any tracks (or with streaming tracks),
Congratulations beautiful video I wanted to ask you If you need to pay the subscription to soundswitch to work
Not to use it with Phillips Hue or Nanoleaf lights, but you will need to pay to use it with DMX lights (plus buy the Micro-DMX dongle to make it work)
Can I work this way with Denon Prime Go?
Yes, you can
I did everything you said and still did not work