i have an axis 500...low range is excellent...ive been up and down many steep hills...climbs over just about anything....never been in 4 wheel dr yet...this one will spin the tires easily...high range i only use for rides on our dirt road when the wife and go out...i have been working the heck out of this thing..the winch is great and tows well....to me and the wife...its a great machine.
@@caseymaples19xx the difference in power i believe is about 6 hp...between the 500 and the 700...your right about the nuts and bolts...i didnt have to many loose...just the ones holding the roof on...replaced the regular nuts with locknuts.
Thanks for your comment as I believe the 500 will be sufficient for me as well and the upgrade in horsepower can be achieved through a replacement motor at a fraction of the cost of the 700 new.
I did the exact same thing. Bought a 500 in November and took it back 2 days later and ordered the 700. It’s been great so far. I use it for work and play and have had no issues. I’m at 250 miles/40 hours right now.
I stuck w the 500 2 years ago... I couldn't beat the price at the time. It was a customer return at tractor supply. Original price was 8995.. Got it for 4200
I guess I got a good one.... Mines a 500, so far no problems, its a beast.... My next door neighbor tagged a big buck and asked me to help him get it out of the woods, thick woods, no problem, he said " the Massimo is unstoppable" .... It's definitely been a good machine..... Never have had any problems with it.... I like mine.....
Bought my 700 2 weeks ago thanks to this video and I love it. Very stable on the road,so no problem zipping to the dollar store. It’s great off road also and I just ordered the soft enclosure through Lowes for the winter. I also had some bolt tightening to do and removed that U bar on the drivers seat.
Hey, thanks for helping point me in the right direction for finding the source of the rattle on my 700. It was the driver's side exhaust flange. Both bolts were missing and the flange had slid down the pipe. I guess I should have realized how loud it was but it's so new to me, I didn't realize. 19 hours and this happens? They have blue loctite on them now and I'll keep an eye on the other side. Just picked up your dust and sauce from your website. Can't wait to try them on some wings! Thanks again!
I just got mine Thursday night. I know exactly what you’re talking about. It’s a 500 and it is slow going on any kind of hill and taking off. Super flat terrain is fine, otherwise it takes a hot minute to get going. I do hate the bar at the seat and will remove it as well. I’m going to call and probably upgrade to the 700 as well. Thanks for the video, it was very helpful! I’m in Tennessee too, Go Vols 🧡
Great video man. We have been trying to decide which one to purchase. So your video is very helpful. I will help you. For your neighbors dog, purchase one of these. I swear by it. We had new neighbors move in with 3 barking dogs. Purchased the Dog Silencer MAX, and our peace and quit outside is starting to return. In a week the amount of barking has cut down to 1 or 2 yips when they come outside. You can find it on Ultimate Bark Control. Anyway. Good luck and we are looking forward to more videos.
This is a 700 rhino clone its a excellent machine i have one and ive put it through the mills ! If you change fluid and take care of it this machine is the same as a Yamaha hell its the same thing ! Like anything folks take care of it and it will take care of you ! I have a sound system on mine that you can hear 2 miles away ! Mine will run 70 miles an hour and yes mine is tagged I drive it to town ! If you learn how to tune it this machine will fly and change oil at 25 hours and run bike oil not car oil the wet clutches have to have the bike oil pay for it or buy clutches ! And this guy is right about tighting the bolts i found a few loose bolts when i bought mine but i went through and tightened everything and lock tighten a few bolts and I'm super happy for what i paid for this machine
@@caseymaples19xx You can put a bigger fuel injector in it and unhook a couple of sensors and i believe the machine would do 80 but i dont want to be in it at that speed ! lol I'm a atv mechanic I buy and sell them and repair them I'm small but I'm 52 I know what time it is i sell a lot of machines used! Trust me the engine is very restricted from the factory and can be unleashed with no worry's just dangerous !
@@caseymaples19xx I also live in Tennessee i live on Harrison ferry mountain and I'm a big guy I'm 6.1 280 but I'm comfortable in this machine ! And man the noise has to be double muffled man and it will get down around 70 decibels ! I bought a killer Noam sound system that's excellent I love it ! I can message you on how to make this machine a beast and it want hurt it i can give you the same speed Yamaha gets out of the rhino and then some never run anything but regular gas zero ethanol or it will run terrible! Man these machines have been built for years the guy that designed the rhino the Patton ran out and Yamaha chose not to buy it back out so the guy sold this design to the Chinese and they copied it very well and this machine is machined as well as the Yamaha was its identical you can interchange the parts period ! ! !
Hopefully getting my tag tomorrow had to take it to the Florida Department of Transportation for an inspection the only thing I had to add was a rear view mirror I did get it approved through the Florida low speed law. I really like mine I used herculiner and the bed and also added heat and dust shield for a rhino and added a boss Bluetooth speaker bar
@@mikemay7134 Cool I put a nice marine sound system in mine ! Its the same here we can tag them for low speed off road but this farming community i live in lets you drive them on state highways and they say nothing the folks here drive them in down town ! I love mine so far I have heard bad things online about these machines but you can bet its from folks that have zero mechanical knowledge !
Thanks for the review. Just got my 700 and so far so good. No joke about the heat and will definitely do a thorough inspection of assembly. The headlights are horrible in my Opinion and would like to upgrade tonLED. Could you please share which bulbs you Got? Having a hard time finding something suitable. Thank you sir!
The jump seat is great and makes a cheap 4 seater the 700 in low will handle anything you could throw at it. I can hit 55 in high range on flat ground if needed but prefer to stay around 45
It's a great review one of the 1st that had a good comparison of their use on the 500 and the 700. I have purchased a 500 waiting for shipping strongly considered upgrading to the 700. The reason I think I won't is the entire chassis identical and I can buy a complete 700 engine for roughly $500. It's $2000 more upgrade new... so myself being very mechanically inclined think I might turbo my 500 just for kicks and if she blows up replace it with the 700. I also live in Florida which is flat terrain obviously and think that whatever trails I might find in travels will tell me whether to do that upgrade sooner than later.. Again great comparison and details talking about your experience so far.
@@caseymaples19xx So after much thought & consideration I canceled my 500 and ordered a 700...your video made me think hard and long... Just knew the potential disappointment was there and made sure to avoid it. Thanks again for the side by side comparison of the 2 side by sides lol.. 😀
Just ordered the 700, should get by 12-13 May. I've ordered the LED bulbs and heat shield. Any other information would be appreciated. Great videos and information. Thank you for posting.
Great review.. the 700 is the way to go.. But I got to ask one thing.. On the next vid please sing the song " Convoy" I got to hear you say " this here's the rubber duck and it looks like we got us a convoy,".. You song like that guy!!
Thanks for the review! This vid helped me make uo my mind in buying one. Question: where did you get the LED headlight upgrades from? Would you happen to have a link? Thanks in advance.
You do great videos on this rig. We have the Axis 700 from Lowes. Just wondering if you have encountered any brake problems. Ours go all the way to the floor... no compression what so ever. Didn't find that out til we were coming down a mountain of 8k feet!!! Only have 163 miles because basically its dangerous to go anywhere without brakes. We did bleed the brake lines thinking that would help.... but still they go to the floor. Is there a way to adjust the pedal? If you have any thoughts...?. that would be great. The service for us is over 100 miles away and they never answer their phone. Thanks for making your vids appreciate it. I know its a lot of work!!!
But could be a bad master cylinder as well. When you bleed them does it require more fluid and are you bleeding with the cap off? So as to not pull air back in the line.
Finally got my tag and I am 100% legal for Florida low speed vehicle law, the only thing I had to add was a rear view mirror for the state of Florida ticket to the Department of Motor Vehicle had it inspected it passed with flying colors underneath the Florida low speed vehicle law now I can enjoy more out of my axis 700
how does it handle the steep hills ? and how does it handle a heavy load on steep hills ? thanks for the video, so sorry for the horrible neighbors that just let their dog bark non-stop!
Well they aren’t horrible neighbors they are actually great but i can’t stand his dog barking. It actually has gotten better recently. But to answer your question off road and hills are zero problems now on the road if you are trying to maintain 50mph it struggles on hills.
@@caseymaples19xx cool thanks for the video and reply! We don’t plan on driving on anything faster than curvy gravel roads in the mountains. Mostly just plan to use it for hauling loads and/or pulling trailers around the property. But we are just down in the Nc mountains and everything is steep and and my dad needs something capable of being a work horse that is smaller than his tractor, but also something my mom can get around in too
@@caseymaples19xx now i see your other videos, i see you have a hot sauce company in white house tn .!.?. that is awesome! u all make the sauce that you sell or is it a distribution company ? i was born only about an hour from there and LOVE some hot sauce, cook bbq (and other outdoor cooking) almost everyday, i'm going to order one of those verity packs and try it out. thanks for the videos! i was shopping for a used honda pioneer, but might get one of these instead
I just bought one from Lowe's in Palatka Florida this morning, what kind of bulbs did you use LED for the headlights? And the other thing that's funny is first thing I did was remove that driver side ctrail just like you did I got tired of it going in my buttcrack getting out
Me and the wife and the dogs went for a little evening ride last night to try out the lights just putting around breaking it in so far I really like this machine, I have a second home in the Ocala National Forest we are going to take it down there after I break it in and do first oil change
@@mikemay7134 Nice I insulated that engine cover in the center and it really helped with engine noise and heat. I'll do an update later to show a few improvements I've made.
Yes on the driver side it gets really hot passenger side not so bad but I definitely want to get some type of thicker insulation to put inside that cowling
ive same exact 2021 700, only 120 miles on it and started bogging down .i barely got it home so i m replacing fuel filter and when trying to get air filter out im having a tough time. is there a trick?? do you have to loosen ebrake mounting bolts .Im at a loss and in Az were its 110 now, any help would be appreciated thank you
Yes only 5 bolts to remove the e brake and shifter and yes it makes it so much easier to change. But I’ve done it with it together as well. Just bear in mind if it isn’t a maintenance thing you are still under warranty
I have a Hisun Axis 700 that has surging issues. I've replaced the injector, fuel filter, removed the fuel pump and drained the tank and hand-wiped it clean (there was a lot of dirt right from Lowes). I put it together and it ran fine for a day and then it started surging again. When I replaced all of the parts listed above as I flushed the fuel line I noticed that when I turned on the key there was a spurt of gas and then it would stop. I'm wondering if there's a filter in the fuel pump that needs to be cleaned or if the fuel pump is bad. It will idle fine, and I can rev it up to redline just fine, but under load it is surging. Any ideas?
Great video! Lots of great information. I just have a few questions. 1. I saw some reviews that said you could get full doors, is that an option? 2. Do you think this would be a good first car?
Anything from a Yamaha rhino will fit i know they do make full enclosures but i would not consider this a car think of it as a fast golf cart. No wipers here you aren’t supposed to be on the road at night and not allowed on highways or interstate.
eBay ,Amazon, and Yamaha rhino parts typically fit, plus they seem to have a large network of repair shops. What kind of parts specifically would you be looking for? Tires, bulbs, spark plugs, belt are pretty standard.
I got tĥe 700 very very unhappy 🙁 with it wirinĝ goiñg to stator fuel pump regular ter ĵunk with only 150 hr ive had to replace it all no shop will not even talk about working on it so i did it my self all so it over heated .when it runs i love it bolts lose and gone but if you can work on them there ok now mine is not fireing,haven't got it figured out yet, anybody
They nice thing is once you buy it. It is truly yours. There warranty and customer service is virtually non existent. They want you to take it 110 miles each way for to rubber band for the doors on a five month old machine with ( 19) miles on it. They cost about 2.50 each but won't send them. You have to take machine to them. Think twice before you buy on. By a brand with service center close to you. Razor or CanAm are a good choice.👎👎👎👎👎
Luckily my service center is close enough. And for the door bands i would have just ordered those on eBay. No way I’d take a machine in for warranty repair on a rubber band. I’m looking for a second one send us a video of yours and a price i might buy it off of you.
i have an axis 500...low range is excellent...ive been up and down many steep hills...climbs over just about anything....never been in 4 wheel dr yet...this one will spin the tires easily...high range i only use for rides on our dirt road when the wife and go out...i have been working the heck out of this thing..the winch is great and tows well....to me and the wife...its a great machine.
I agree good machines I just needed more power
@@caseymaples19xx the difference in power i believe is about 6 hp...between the 500 and the 700...your right about the nuts and bolts...i didnt have to many loose...just the ones holding the roof on...replaced the regular nuts with locknuts.
Thanks for your comment as I believe the 500 will be sufficient for me as well and the upgrade in horsepower can be achieved through a replacement motor at a fraction of the cost of the 700 new.
I did the exact same thing. Bought a 500 in November and took it back 2 days later and ordered the 700. It’s been great so far. I use it for work and play and have had no issues. I’m at 250 miles/40 hours right now.
I stuck w the 500 2 years ago... I couldn't beat the price at the time. It was a customer return at tractor supply. Original price was 8995.. Got it for 4200
Im thinking about boring it out as much as i can
Thanks for this review. We picked up our 700 yesterday and today I'm going to work it over to make sure there are no Gremlins.
I guess I got a good one.... Mines a 500, so far no problems, its a beast.... My next door neighbor tagged a big buck and asked me to help him get it out of the woods, thick woods, no problem, he said " the Massimo is unstoppable" .... It's definitely been a good machine..... Never have had any problems with it.... I like mine.....
Bought my 700 2 weeks ago thanks to this video and I love it. Very stable on the road,so no problem zipping to the dollar store. It’s great off road also and I just ordered the soft enclosure through Lowes for the winter. I also had some bolt tightening to do and removed that U bar on the drivers seat.
Hey, thanks for helping point me in the right direction for finding the source of the rattle on my 700. It was the driver's side exhaust flange. Both bolts were missing and the flange had slid down the pipe. I guess I should have realized how loud it was but it's so new to me, I didn't realize. 19 hours and this happens? They have blue loctite on them now and I'll keep an eye on the other side. Just picked up your dust and sauce from your website. Can't wait to try them on some wings! Thanks again!
Glad to have helped
I just got mine Thursday night. I know exactly what you’re talking about. It’s a 500 and it is slow going on any kind of hill and taking off. Super flat terrain is fine, otherwise it takes a hot minute to get going.
I do hate the bar at the seat and will remove it as well. I’m going to call and probably upgrade to the 700 as well. Thanks for the video, it was very helpful! I’m in Tennessee too, Go Vols 🧡
Good thing is if you got it from Lowe's easy return policy
If you didn't wind up returning the 500.. A good trick is to run it in low range on hilly or off road terrain
Our Lowe's here just has the 500 . Did nor know the had the 700 . Thank you for the information
Still a good machine especially if you aren’t looking for speed
Great video man. We have been trying to decide which one to purchase. So your video is very helpful. I will help you. For your neighbors dog, purchase one of these. I swear by it. We had new neighbors move in with 3 barking dogs. Purchased the Dog Silencer MAX, and our peace and quit outside is starting to return. In a week the amount of barking has cut down to 1 or 2 yips when they come outside. You can find it on Ultimate Bark Control. Anyway. Good luck and we are looking forward to more videos.
This is a 700 rhino clone its a excellent machine i have one and ive put it through the mills ! If you change fluid and take care of it this machine is the same as a Yamaha hell its the same thing ! Like anything folks take care of it and it will take care of you ! I have a sound system on mine that you can hear 2 miles away ! Mine will run 70 miles an hour and yes mine is tagged I drive it to town ! If you learn how to tune it this machine will fly and change oil at 25 hours and run bike oil not car oil the wet clutches have to have the bike oil pay for it or buy clutches ! And this guy is right about tighting the bolts i found a few loose bolts when i bought mine but i went through and tightened everything and lock tighten a few bolts and I'm super happy for what i paid for this machine
Wow not sure mine will ever hit 70mph but I don't really need to anyhow 50 is fine with me, but can you share what you did to get that speed?
@@caseymaples19xx You can put a bigger fuel injector in it and unhook a couple of sensors and i believe the machine would do 80 but i dont want to be in it at that speed ! lol I'm a atv mechanic I buy and sell them and repair them I'm small but I'm 52 I know what time it is i sell a lot of machines used! Trust me the engine is very restricted from the factory and can be unleashed with no worry's just dangerous !
@@caseymaples19xx I also live in Tennessee i live on Harrison ferry mountain and I'm a big guy I'm 6.1 280 but I'm comfortable in this machine ! And man the noise has to be double muffled man and it will get down around 70 decibels ! I bought a killer Noam sound system that's excellent I love it ! I can message you on how to make this machine a beast and it want hurt it i can give you the same speed Yamaha gets out of the rhino and then some never run anything but regular gas zero ethanol or it will run terrible! Man these machines have been built for years the guy that designed the rhino the Patton ran out and Yamaha chose not to buy it back out so the guy sold this design to the Chinese and they copied it very well and this machine is machined as well as the Yamaha was its identical you can interchange the parts period ! ! !
Hopefully getting my tag tomorrow had to take it to the Florida Department of Transportation for an inspection the only thing I had to add was a rear view mirror I did get it approved through the Florida low speed law. I really like mine I used herculiner and the bed and also added heat and dust shield for a rhino and added a boss Bluetooth speaker bar
@@mikemay7134 Cool I put a nice marine sound system in mine ! Its the same here we can tag them for low speed off road but this farming community i live in lets you drive them on state highways and they say nothing the folks here drive them in down town ! I love mine so far I have heard bad things online about these machines but you can bet its from folks that have zero mechanical knowledge !
Thanks for the update I just got a 500
Would b great to see more reviews on the store bought
Utv.
Lol! “No body knows how to read anymore”! great review. And great vid.
Thanks for the review. Just got my 700 and so far so good. No joke about the heat and will definitely do a thorough inspection of assembly. The headlights are horrible in my
Opinion and would like to upgrade tonLED. Could you please share which bulbs you
Got? Having a hard time finding something suitable. Thank you sir!
Looking at one. Would need the 700 for the terrain we live on. I liked the idea of the jump seats for the bed..
The jump seat is great and makes a cheap 4 seater the 700 in low will handle anything you could throw at it. I can hit 55 in high range on flat ground if needed but prefer to stay around 45
It's a great review one of the 1st that had a good comparison of their use on the 500 and the 700.
I have purchased a 500 waiting for shipping strongly considered upgrading to the 700.
The reason I think I won't is the entire chassis identical and I can buy a complete 700 engine for roughly $500.
It's $2000 more upgrade new... so myself being very mechanically inclined think I might turbo my 500 just for kicks and if she blows up replace it with the 700.
I also live in Florida which is flat terrain obviously and think that whatever trails I might find in travels will tell me whether to do that upgrade sooner than later..
Again great comparison and details talking about your experience so far.
Yeah a turbo would be awesome. Can you point me to where you can buy a 700 engine for $500 I’d like to have an extra around just in case.
@@caseymaples19xx ebay...it's the top end complete kit for your 700..so I would swap the 500 cylinder and bore for the 700 kit..
@@caseymaples19xx 2nd link has bottom end rebuild too..
@@jimbradley727 oh yeah good idea didn’t think about that
@@caseymaples19xx So after much thought & consideration I canceled my 500 and ordered a 700...your video made me think hard and long...
Just knew the potential disappointment was there and made sure to avoid it.
Thanks again for the side by side comparison of the 2 side by sides lol.. 😀
Just ordered the 700, should get by 12-13 May. I've ordered the LED bulbs and heat shield. Any other information would be appreciated. Great videos and information. Thank you for posting.
Heat shield to go over the center console?
Great review.. the 700 is the way to go..
But I got to ask one thing..
On the next vid please sing the song " Convoy"
I got to hear you say " this here's the rubber duck and it looks like we got us a convoy,"..
You song like that guy!!
Haha the guy from smoky and the bandit?
@@caseymaples19xx
No.. pull up the song Convoy ". Man you sound just like that guy.. CW McCall..
Spot on.. !!!
The neighbor watching this like 👀 👀👀 when you mention the dog. 😂
I love my neighbor and he knows it, we joke about it all the time so he won’t be surprised lol. Thanks for watching
Thanks for the review! This vid helped me make uo my mind in buying one. Question: where did you get the LED headlight upgrades from? Would you happen to have a link? Thanks in advance.
eBay BA20D is the part number
You do great videos on this rig. We have the Axis 700 from Lowes. Just wondering if you have encountered any brake problems. Ours go all the way to the floor... no compression what so ever. Didn't find that out til we were coming down a mountain of 8k feet!!! Only have 163 miles because basically its dangerous to go anywhere without brakes. We did bleed the brake lines thinking that would help.... but still they go to the floor. Is there a way to adjust the pedal? If you have any thoughts...?. that would be great. The service for us is over 100 miles away and they never answer their phone. Thanks for making your vids appreciate it. I know its a lot of work!!!
Thanks and just making sure you do have brake fluid in it correct?
But could be a bad master cylinder as well. When you bleed them does it require more fluid and are you bleeding with the cap off? So as to not pull air back in the line.
Finally got my tag and I am 100% legal for Florida low speed vehicle law, the only thing I had to add was a rear view mirror for the state of Florida ticket to the Department of Motor Vehicle had it inspected it passed with flying colors underneath the Florida low speed vehicle law now I can enjoy more out of my axis 700
Very nice, I will be doing an upd.ate again soon
They say you have to have both seat belts fasten it has a safety feature on it that cuts the power down if the seat belts are not fastened.
Only the drivers side has to be fastened and it doesn’t cut power only top speed it limits it to 10mph
how does it handle the steep hills ?
and how does it handle a heavy load on steep hills ?
thanks for the video, so sorry for the horrible neighbors that just let their dog bark non-stop!
Well they aren’t horrible neighbors they are actually great but i can’t stand his dog barking. It actually has gotten better recently. But to answer your question off road and hills are zero problems now on the road if you are trying to maintain 50mph it struggles on hills.
@@caseymaples19xx cool thanks for the video and reply!
We don’t plan on driving on anything faster than curvy gravel roads in the mountains. Mostly just plan to use it for hauling loads and/or pulling trailers around the property. But we are just down in the Nc mountains and everything is steep and and my dad needs something capable of being a work horse that is smaller than his tractor, but also something my mom can get around in too
@@caseymaples19xx now i see your other videos, i see you have a hot sauce company in white house tn .!.?. that is awesome!
u all make the sauce that you sell or is it a distribution company ?
i was born only about an hour from there and LOVE some hot sauce, cook bbq (and other outdoor cooking) almost everyday, i'm going to order one of those verity packs and try it out.
thanks for the videos! i was shopping for a used honda pioneer, but might get one of these instead
@@MrMrsregor i don’t see you having any issues pulling. Especially in low range. I plan on wiring trailer lights later for mine.
How long was the break in period? At what point did you start using it fully?
I just bought one from Lowe's in Palatka Florida this morning, what kind of bulbs did you use LED for the headlights? And the other thing that's funny is first thing I did was remove that driver side ctrail just like you did I got tired of it going in my buttcrack getting out
BA20D FROM EBAY
@@caseymaples19xx thanks I'll check it out
Me and the wife and the dogs went for a little evening ride last night to try out the lights just putting around breaking it in so far I really like this machine, I have a second home in the Ocala National Forest we are going to take it down there after I break it in and do first oil change
@@mikemay7134 Nice I insulated that engine cover in the center and it really helped with engine noise and heat. I'll do an update later to show a few improvements I've made.
Yes on the driver side it gets really hot passenger side not so bad but I definitely want to get some type of thicker insulation to put inside that cowling
I have problems with the 500.
Would this thing fit on a 4'x8' Harbor Freight trailer?
No!
Huge thanks for this review!
ive same exact 2021 700, only 120 miles on it and started bogging down .i barely got it home so i m replacing fuel filter and when trying to get air filter out im having a tough time. is there a trick?? do you have to loosen ebrake mounting bolts .Im at a loss and in Az were its 110 now, any help would be appreciated thank you
Yes only 5 bolts to remove the e brake and shifter and yes it makes it so much easier to change. But I’ve done it with it together as well. Just bear in mind if it isn’t a maintenance thing you are still under warranty
Comment demancher la ptite guire de tnming d un 700utv motobishy2008
I have a Hisun Axis 700 that has surging issues. I've replaced the injector, fuel filter, removed the fuel pump and drained the tank and hand-wiped it clean (there was a lot of dirt right from Lowes). I put it together and it ran fine for a day and then it started surging again. When I replaced all of the parts listed above as I flushed the fuel line I noticed that when I turned on the key there was a spurt of gas and then it would stop. I'm wondering if there's a filter in the fuel pump that needs to be cleaned or if the fuel pump is bad. It will idle fine, and I can rev it up to redline just fine, but under load it is surging. Any ideas?
I would return it to lowes if having that issue you have 90 days
Really great review! Thank you!
I have just over 4 hours on my 700 Axis and without any adjustments I got 48 mph in 2 wheel drive in high gear.
The other day with the lower windshield and roof off flat ground 55mph
Great video! Lots of great information. I just have a few questions. 1. I saw some reviews that said you could get full doors, is that an option? 2. Do you think this would be a good first car?
Anything from a Yamaha rhino will fit i know they do make full enclosures but i would not consider this a car think of it as a fast golf cart. No wipers here you aren’t supposed to be on the road at night and not allowed on highways or interstate.
question.....my 700 got tipped on its side....now it runs fine on idle BUT WHEN YOU GIVE IT GAS IS SPUDDERS AND STALLS..
Any ideas
Map sensor or mass air flow
What’s under the drive’s seat?
I've heard stories of no power in reverse. Do you have this problem I'm looking at the cub cadet 700 which is the same
I’ve had no issue with that.
does it come with soft sides ? also can it plow. i live in michigan and would use it plow the drive.or would you get a different brand
There is a plow option and soft sides do not come with it but can be easily put on, rhino parts do fit it
This was going to be my question too- and I’m in Michigan- so thanks
@@kenkuchnicki9012 i got mine from lowes. it was 2000 cheaper. and if start a card with them ,they took off 475 off that price.
02 sensor is a part of the fuel injection, it reads how much fuel is needed , just as your car does.
Well yes i agree but not sure what this comment has to do with anything.
What are you using for fuel? They recommend ethanol free 91 octane. Just curious what you're running.
I just use what ever is handy
Thanks for your review. Is there anyway i can reach out to you to ask you a few questions?
Feel free to ask anything on here I’ll be happy to answer what i can.
Does the seat bar you removed unbolt or did you need to cut it off?
Just bolts
Great review And thank you !
Thinking about buying a 700 Axis .. where can I find parts ?
eBay ,Amazon, and Yamaha rhino parts typically fit, plus they seem to have a large network of repair shops. What kind of parts specifically would you be looking for? Tires, bulbs, spark plugs, belt are pretty standard.
How does the Axis 700 drive going up a rocky road?
Does just fine
Do you have issues with acceleration? Just got mine and it feels like you have to floor it to get going
No issues with accelerating on mine now on the 500 it was slow to get going.
Very well put review !!!
Does it have locking differential
It does
@@caseymaples19xx thank you for the reply
Unplug the connection under the seat and disable the seatbelt/ speed limiter
Does it have power steering and engine braking system?
No power steering engine braking yes
@@caseymaples19xx I have the 750 crew and it does have EPS
Good walk around. Thanks.
Great review!
Price?
I believe that's called 'Mass-ee-mo'
I got tĥe 700 very very unhappy 🙁 with it wirinĝ goiñg to stator fuel pump regular ter ĵunk with only 150 hr ive had to replace it all no shop will not even talk about working on it so i did it my self all so it over heated .when it runs i love it bolts lose and gone but if you can work on them there ok now mine is not fireing,haven't got it figured out yet, anybody
LOL my neighbors dogs mouth
i have one
They nice thing is once you buy it. It is truly yours. There warranty and customer service is virtually non existent. They want you to take it 110 miles each way for to rubber band for the doors on a five month old machine with ( 19) miles on it. They cost about 2.50 each but won't send them. You have to take machine to them. Think twice before you buy on. By a brand with service center close to you. Razor or CanAm are a good choice.👎👎👎👎👎
Luckily my service center is close enough. And for the door bands i would have just ordered those on eBay. No way I’d take a machine in for warranty repair on a rubber band. I’m looking for a second one send us a video of yours and a price i might buy it off of you.
I bought a 2014 bennche 700 EFI, are you interested in buying?
Forgot to mention it’s a crew with plow
@@julioaguilar1085 where are you located and maybe
@@caseymaples19xx I live in Illinois, how much do you think it’s worth? Only 1900 miles
I put an exhaust silencer on mine and it really helped with the loudness.
ua-cam.com/video/r5ebn5lHB3E/v-deo.html