Відео

I had the same seat belt issue but solved it by blowing the wind up housing out with compressed air until no debris comes out. I also oiled mine.

Hey all. Just thought I'd weigh in with our pretty much horrible experience with a new Axis 700 purchased last May 2023 from Lowes in Winchester, VA. Brought it home, put about 10 hours on it and it won't hold a charge. LOOOOONG story, the mobile tech has been out 4 times, replaced the battery, voltage regulator twice. I told him in February I thought (after doing a bit of research) that it was the stator, since if kept on the trickle charger it reads 100% charged, run it 15 minutes and it's down to 40%-that means the stator is not charging the battery while it's running. Anyway, last time he came out the part that he was supposed to change out was shipped in too small a package and was bent and unusable. I have about a 10 page email chain to 6 different folks at Hisun in TX begging for some resolution. They ignore my calls, emails, voice mails, etc. Needless to say, we are really frustrated with the vehicle, the company, the mechanic; pretty much everything to do with this worthless POS. It is truly ridiculous to spend $10K on something that is now sitting in our garage torn apart waiting for the worthless mechanic once again.

I guess I got a good one.... Mines a 500, so far no problems, its a beast.... My next door neighbor tagged a big buck and asked me to help him get it out of the woods, thick woods, no problem, he said " the Massimo is unstoppable" .... It's definitely been a good machine..... Never have had any problems with it.... I like mine.....

Is the 500 cheper i have bought a lot of used cars in the pass for less than what the sides cost

I have aa question, what is the price of one of these? I was checking the Yamaha Rhino and to me they are looking the same I'm I wrong or really they are? They just have a different brand engine or even that is the same? I will appreciate if You or someone else answer my questions please

I believe that's called 'Mass-ee-mo'

My 500 seems have mostly transmission gear noise.

Hi, I live in Maryville, TN. I have an Axis 700. I see you have registered and plated yours. When I received the certificate of origin for the vehicle, it has not to be registered for road use printed on it. How did you get yours registered and plates. I will be registering it in Blount County.

Those guards on the back are upside down i believe…

I have Hisun700 and I would like to know how I replace the emergency brake cable.

Hey great video! I have same Axis 700 2022. Can u tell me exactly where is the oil dipstick? How do I access it please! Thanks

Update with mileage and hours?

I put an exhaust silencer on mine and it really helped with the loudness. ua-cam.com/video/r5ebn5lHB3E/v-deo.html

I put an exhaust silencer on mine and it really helped with the loudness. ua-cam.com/video/r5ebn5lHB3E/v-deo.html

I put an exhaust silencer on mine and it really helped with the loudness. ua-cam.com/video/r5ebn5lHB3E/v-deo.html

Hey, thanks for helping point me in the right direction for finding the source of the rattle on my 700. It was the driver's side exhaust flange. Both bolts were missing and the flange had slid down the pipe. I guess I should have realized how loud it was but it's so new to me, I didn't realize. 19 hours and this happens? They have blue loctite on them now and I'll keep an eye on the other side. Just picked up your dust and sauce from your website. Can't wait to try them on some wings! Thanks again!

How long was the break in period? At what point did you start using it fully?

Comment demancher la ptite guire de tnming d un 700utv motobishy2008

might you guys be creating and engine overheating issue by blocking venting to the engine??

What part of Tennessee are you in? I'm in West TN.

Do you have a video of yours running so I can hear how loud it is now with the added PVC? Thinking about doing this to mine but would like to hear the difference it makes. Thanks

I have this utv bought Jan this year, i did go back and retighten all the screws i saw they were all pretty much lose. Mine runs good but I do have a squeal when it first starts up seems to go away when it warms up. Sounds like the brakes not sure. But it's super useful made life less stressful when your working on 10 acres. Haven't changed the oil but I will have 10 hrs on it.

Could you tell me what the idle speed is on the Hisun Axis 700? Please and thank you.

The seatbelt could be due the roll over.

Great review.. the 700 is the way to go.. But I got to ask one thing.. On the next vid please sing the song " Convoy" I got to hear you say " this here's the rubber duck and it looks like we got us a convoy,".. You song like that guy!!

why is massimo in your title, they are not make by hisun

Made my axis 700 street legal. How do I share pictures

I've heard stories of no power in reverse. Do you have this problem I'm looking at the cub cadet 700 which is the same

What are you using for fuel? They recommend ethanol free 91 octane. Just curious what you're running.

Hi there. I'm hoping you see this cause I'm at wits end with my axis 700. You said you have a dealer who honors warranty work on these about 40 miles outside of Nashville. Would you mind letting me know who the dealer is because I can't find anyone. No one in this area warranty them and I was told the closest dealer that does warranty work is in San Diego. You can imagine what was said. Thanks!

I have 300 Kms on my 2021 Hisun 500. It's so far been problem free and smooth to drive. I've necer used the winch but i have been into some bad terrain which this machine handles well. Great on fuel too!

I’ve been interested in how these preform and if they actually hold glad I found your channel!

😞 p̾r̾o̾m̾o̾s̾m̾

Good luck pulling anything or hauling anything heavy

Is that yours, I get mine this week

It's a great review one of the 1st that had a good comparison of their use on the 500 and the 700. I have purchased a 500 waiting for shipping strongly considered upgrading to the 700. The reason I think I won't is the entire chassis identical and I can buy a complete 700 engine for roughly $500. It's $2000 more upgrade new... so myself being very mechanically inclined think I might turbo my 500 just for kicks and if she blows up replace it with the 700. I also live in Florida which is flat terrain obviously and think that whatever trails I might find in travels will tell me whether to do that upgrade sooner than later.. Again great comparison and details talking about your experience so far.

Nice car dude 👍

I have problems with the 500.

DRIVING YOUR VEHICLE 7-1: WARNING; This vehicle is designed for the operator and one passenger. Never carry passengers in the cargo bed.

You do great videos on this rig. We have the Axis 700 from Lowes. Just wondering if you have encountered any brake problems. Ours go all the way to the floor... no compression what so ever. Didn't find that out til we were coming down a mountain of 8k feet!!! Only have 163 miles because basically its dangerous to go anywhere without brakes. We did bleed the brake lines thinking that would help.... but still they go to the floor. Is there a way to adjust the pedal? If you have any thoughts...?. that would be great. The service for us is over 100 miles away and they never answer their phone. Thanks for making your vids appreciate it. I know its a lot of work!!!

I'm glad you finally mentioned why you shouldn't trailer it with the roof on. I'm planning on taking mine on a 400 mile road trip to the mountains and hadn't read that or even heard anything about it. I noticed in an earlier video you also mentioned removing the windshield. Let me guess the velcro pulls off.

Appreciate your videos. We have the Axis 700 dron Liwes and there is no brake compression. Have you had to bleed the brakes?

Good videos, real informative. After watching yours we went and ordered one. I’ll definitely check for any loose bolts and you were correct that bar on the seat has to go and I’m gonna add a silencer to the muffler. What kind of material did you use for the heat shield and in your other video l thought you were going to rubberize the underside of the bed. Your video was good and the company should use you to pitch their product.

Looking to buy the 700 land tow my boat to local launch close by. Any idea how much tong weight that little hitch will take and not bend on me or think it can be changed out to a 2" receiver I use on my car now? Keep up the good vids on this machine you helped me make up my mind to purchase.

Thanks for the review. Just got my 700 and so far so good. No joke about the heat and will definitely do a thorough inspection of assembly. The headlights are horrible in my Opinion and would like to upgrade tonLED. Could you please share which bulbs you Got? Having a hard time finding something suitable. Thank you sir!

Thanks for your review. Is there anyway i can reach out to you to ask you a few questions?

question.....my 700 got tipped on its side....now it runs fine on idle BUT WHEN YOU GIVE IT GAS IS SPUDDERS AND STALLS.. Any ideas

I have the same machine. What "fire wall material" did you use under the engine cowling and under the driver seat? Looking to use your suggestions to reduce interior heat. Thanks!

How does the Axis 700 drive going up a rocky road?

I have a Hisun Axis 700 that has surging issues. I've replaced the injector, fuel filter, removed the fuel pump and drained the tank and hand-wiped it clean (there was a lot of dirt right from Lowes). I put it together and it ran fine for a day and then it started surging again. When I replaced all of the parts listed above as I flushed the fuel line I noticed that when I turned on the key there was a spurt of gas and then it would stop. I'm wondering if there's a filter in the fuel pump that needs to be cleaned or if the fuel pump is bad. It will idle fine, and I can rev it up to redline just fine, but under load it is surging. Any ideas?