Detergent Spray drying process for Washing powder manufacturing part 1
Вставка
- Опубліковано 20 жов 2024
- In this video, we will learn what type of missionary what missionary is required for separate drawing process of Detergent manufacturing
 a reaction vessel a spray dryer, high-pressure pump low pressure pump at disintegrator material vessels storage vessels ID Fan induced dropped Fan for Fan a lift a furnace a qualified furnace duct assembly, no assembly cyclone dust collector back dust collector
In previous videos we learnt dry mixing process of washing powder.
Today we will learn what is wet mixing process of washing powder?
As we discuss in previous videos the machinery required for this process is very much costly. Not everyone can afford this.
The equipment required is:
1. A spray dryer
2. A furnace or a coal fired furnace, which can provide hot gases to dry the slurry
3. High pressure pump
4. Disintegrator
5. Low pressure pump
6. A reaction vessel
7. A holding vessel
8. Combustion fan or forced draft fan
9. ID fan or induced draft fan
10. Air lift fan which lifts the powder from ground floor to upper floor for next process
11. Cyclones for dust collector
12. Liquid raw material storage vessels
13. Weighing vessels to weigh bulk quantities of liquid raw materials
14. Nozzles and its assembly.
In next video we will discuss each equipment briefly.
Stay connected
Thank you
Allah Hafiz.
#detergentformula #surfdetergent #ad #detergentmaking.
#detergentrawmaterials #chemical #best #cleaning #formulation