TIP: To make the sunflower liquid lecithin easier to measure, dip your measuring spoon into the oil before pouring the liquid lecithin into the spoon. It will just glide right off without the sticky mess. 🙌
I've tried making raw CBD oil and also stovetop CBD oil, but following this recipe produced the best results out of all my experiments. I've also never added lecithin before, maybe this helped as well.
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
@@beezeal2042 Thanks for the suggestion, but I've got to disagree with you there. I've tried isolates, and I get zero benefit from this form of CBD. I also don't need to drink a whole cup, 20-30 drops is all I generally need. Finally, I enjoy the flavour of CBD oil. Each to their own 👍
@@beezeal2042 breezal. I'm a bit lost. Does "cool isolate" refer to isolated whey protein? can you kindly help me out with this one? And if so. How much do you add to what measurements. And if not. what exactly are you referring to? Many thanks!
@antonhuman8446 so "cool" was like ok cool not "cool isolate" it's just cbd isolate, cbd isolate is 99%+ pure cbd and you can get it just cbd or full spectrum cbd. Anyways, 1 gram of isolate equals 1000mg or rather 999+mg lol and it's already active so no decarb is needed, it's also water soluable, tasteless, odorless. Hope this helps ☝️🤟✌️
Perfectly executed. Thank you Ma'am. Seeing that you have rather extensive experience with cannabis, could you kindly advise the potency/mg/ml derived from your recipe? When using a strong strain. God bless.
There are many calculators on line for estimating the cbd or thc content. It's just an estimate. If you want exact you have to test the finished product either in a lab or one of the testers at home.
I stumbled on This video by accident and i have to ask IS IT JUST ME ? Every time i think of some thing UA-cam shows a video about what i was just thinking WF!!!!!!!!! going on !!!!!!!!!!!
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
hey are you sure this is "cbd oil"? this looks like thc oil to me not cbd. ur using regular cannabis am i correct? cuz if so then this is gonna have a lot thc compared to cbd
Hey dude I’m glad to hear. Do you have a majicalbutter machine at all? They start at about $400’ish for the new MB2 machine which my one about five years ago saved my life with my illness and I wasn’t able access to the medicines I needed to I had to learn and I started everything just in the kitchen until I got the first model MB and you can get 95-96% grain alcohol online for about $120 for a 750ml bottle, and same with the MCT oil, cheap and easy to get online 👍🏽 Hope you’re still going strong homes 👊🏽
The MB decarb box is made of food grade silicone. Works great every time and the thermometer is truly the bomb and gives consistent results every time.
@petrosstefanis6234 No problem. Been making oil for a while and initially decarbing with foil on a sheet pan. The box simplifies the process with more consistency in my opinion. Just sharing what works for me. Thanks for your reply.
We’re do you get the decarb box from my wife as bowel cancer and she was told she can not have any treatment and as less then a year to live so I’m trying to make oil
You can definitely create canna-honey in the MagicalButter machine by swapping out the coconut oil. You might want to adjust the ratios though, as there's 500ml of oil in this recipe.
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
i do not think we need to decarboxilate the buds because we are heating up the oil to release the medicine, why not release right in the oil and not lose anything?
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
And hemp and cbd oil is legal in the u.s. it's a part of the hemp act, why you think you can order hemp flower and oil ordered right to your house from many websites? Check it out, it's legal across the board
Hey Jesse, adding lecithin further emulsifies and binds the cannabinoids with the oil. Lecithin increases the bioavailability of cannabinoids like CBD and THC because it is a phospholipid. Phospholipids help cells absorb compounds more effectively. In saying all this, you can make the oil without it.
Impossible to compare to medicinal products, they use entirely different equipment, extraction processes, specific genetic breeds and varying cannabinoid ratios to create their products. Plus it's unique to each manufacturer. If you want to make the oil stronger add more CBD bud to the mix 👍
@@hinterlandco.8346 Appreciate you explaining that and I kind of thought that would be the case. Yes I intend to use a 16% CBD bud for pain management. Thanks for getting back.
@@cokeman9135 If you've got bud, you can try using a dry herb vape to get almost instantaneous effects. I use the Storz & bickel Mighty, it's really good. Hope it all goes well and you get some relief!
@@hinterlandco.8346 mighty looks great- presently I use da Buddha and pax 3 - ball vapes $500 are the new technology but sold out - just ordered the magical butter machine yesterday de carb model
Ill second the S&B vape but pass on the CBD flower. That shit is nasty when smoked or vaped. Plus your body absorbs and processes a much higher percentage of the CBD or THC with the MCT than vaping. I was amazed at how much less flower I was using when ingesting vs vaping once I purchased the MB Machine and started making the oil. Easily cut my monthly THC flower usage in half.
Please please please answer me 🙏🏼this will a great help in curing my condition. A research suggests to use ONLY Trichomes of Indica female flowers (Cannabis indica for crohns 200-900mg Oil extracted from Trichomes (NOT seed or leaves) of female flowers. ) How is it possible to ONLY find Trichomes? And how much would I have to use to get 200-900 mg CBD? If you can please help?
Information relayed to me from a reliable cbd oil maker said the best cbd is made from half and half. Which is the way Rick Simpson oil is made. Example: if you were to use 14g, 7g decarb 7g raw.
Can you add the lecithin AFTER? So lets say you made CBD oil in the Magic Butter without adding or forgetting to add lecithin. Can you add it afterwards??
I wouldn't add it in after the extraction, there isn't much point at the stage. There are heaps of recipes that don't include lecithin and I've also made a lot of oil without using it, your oil will still be great :)
Hello i made the Cbd oil with the same machine and the oil you recommended and i stored the oil in dark bottles for 5 months in a dark cold place. But the oil starting to have bad taste. Why does it happend all the time?
Hi I'm thinking of buying one and I am wondering is it OK to reduce the quantity of oil let's say 2 cub of oil with 70g of herb for a more potant mix? Or what would be the least amount of oil I could use ? Thanks
I've never run more than 42 grams in a 2 cup batch. I've read that the mct oil will only bind so much cbd or thc. After that point it's likely a waste of product unless your processing the "sludge".
Don't need tools... All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
i live in Canada and sometine there is shortages in stor of Coconut oil (liquied) but I could find coconuat oils solid. Do I have the same amount for infusion or being solid the oil changing the volume make me confused. So, what would be the proportions of coconuat oil solid for 2 oz cannabis if don't mind. THANK YOU!
Hey there, i'd suggest melting the coconut oil down and using the exact same measurements as recommended in the video. 2 cups of oil per 14g (.5 oz) of flower. So for 2 oz flower you'll need 4 cups of coconut oil.
but did you notice anything? because 14 gram with 500 ml, if you have 14 or 13 % cbd and then you make a lot of bottles, the miligram in each bottle will be under 50 mg cbd
Hey there, you definitely can. You can check out our recipe that has an alternative method if you don't have the MagicalButter Machine. Recipe here - hinterlandco.com.au/how-to-make-cbd-oil/
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
Yes it does. This method is a whole plant extraction meaning it will retain all naturally occurring compounds in the plant, including both CBD and THC. The type of bud you use will determines the concentrations of CBD and THC. Commercially grown hemp usually contains up to 0.3% THC which is a very small amount, whereas marijuana has much higher concentrations. The end result depends on the bud you use to make the oil.
i don't have all the machines you used but I wanna make CBD oil so bad to try if it'll work on handling my psoriasis since CBD oil is illegal in my country (but I know where to get the leaves illegally)
Hey Ash, unfortunately one of the pitfalls of making your own CBD oil is that you aren't able to get an accurate strength (unless you get it tested). We'd recommend starting low and going slow with the dosage, start with one or two drops and titrate up until you feel beneficial effects.
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
Unfortunately, there is no way to determine the concentration of CBD unless you wanted to find somewhere to test it. Given this, we recommend starting out with low doses and slowly increasing the dosage until you feel the therapeutic benefits.
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
I so can't wait until it is legal here... it is ridiculous that something so helpful to so many people that can be grown at home relatively easily is illegal.
Hi Melody, you should probably reach out to MagicalButter Machine to discuss the issue with them. During the infusion process the blender should break up the flower.
Don't use soy lecithin, stuff is straight poison and completely unnecessary. Also you don't need an unnecessarily expensive butter maker, just a pot with water and some jars do the same thing. Use a coffee grinder for your flower after de-carboxylation and use a natural cloth like cheesecloth for the straining. This video is a sales pitch from a hot lady
And where have you read about lecithin being poison?? I need the link..because I've never read that, soy lecithin is not as good for you as sunflower lecithin..it ain't poison though lmao..it's a emulsifier
@@emoneymichael3077 Do you know what an emulsifier is? That doesn't mean it's safe to consume... Dawn dish soap is an emulsifier because it mixes fats and water. Emulsion is just mixing two liquids that don't normally mix. Sunflower lecithin is a toxic seed oil, maybe marginally less toxic than soy, but not enough to matter for human health. It has too high of a ratio of Omega 6 to Omega 3 fatty acids, and is naturally rancid from processing, like all seed oils processed through heat are. When was the last time you saw a sunflower leaking some kind of oil? Why would it be safe to consume a mass extract from a plant that grows it's own toxins to keep animals from eating it, through a heating process that naturally turns the oil rancid? All seed oils that aren't cold pressed go through a deodorization process to make them seem like they aren't the completely vile cancer and heart disease causing filth that they are. I just explained why all fast food is so bad for you, and the diseases of modern civilization. It's seed oils
Would have liked to watch this but like so many ignorant UA-cam posters, this person just had to add annoying irritating, and distracting background "music" rendering (to many) the video unwatchable.
Yep, definitely! You can make it using the stovetop method using good ol' fashioned pots and pans 😆 we haven't filmed this method but you can follow the recipe in this article we wrote (look for the section titled 'alternative method': hinterlandco.com.au/how-to-make-cbd-oil/
TIP: To make the sunflower liquid lecithin easier to measure, dip your measuring spoon into the oil before pouring the liquid lecithin into the spoon. It will just glide right off without the sticky mess. 🙌
what is cbd content of the oil? is there a way to calculate it?
Tried this recipe a few times, turned out to be the best i’ve found
I tried this and my BF gave me the thumbs up. I’ll be back again and again for this
Thanks for the great video. Why not just all MCT oil? What’s the advantage of the lecithin?
I've tried making raw CBD oil and also stovetop CBD oil, but following this recipe produced the best results out of all my experiments. I've also never added lecithin before, maybe this helped as well.
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
@@beezeal2042 Thanks for the suggestion, but I've got to disagree with you there. I've tried isolates, and I get zero benefit from this form of CBD. I also don't need to drink a whole cup, 20-30 drops is all I generally need. Finally, I enjoy the flavour of CBD oil. Each to their own 👍
@@suryemason2598 cool isolate works great for me and I make it so strong 4 drops gives me 100mg and no taste
@@beezeal2042
breezal. I'm a bit lost. Does "cool isolate" refer to isolated whey protein? can you kindly help me out with this one?
And if so. How much do you add to what measurements.
And if not. what exactly are you referring to?
Many thanks!
@antonhuman8446 so "cool" was like ok cool not "cool isolate" it's just cbd isolate, cbd isolate is 99%+ pure cbd and you can get it just cbd or full spectrum cbd. Anyways, 1 gram of isolate equals 1000mg or rather 999+mg lol and it's already active so no decarb is needed, it's also water soluable, tasteless, odorless. Hope this helps ☝️🤟✌️
Perfectly executed. Thank you Ma'am.
Seeing that you have rather extensive experience with cannabis, could you kindly advise the potency/mg/ml derived from your recipe? When using a strong strain.
God bless.
You need some decent tech to actually see what the potency level is. I doubt this chick has tech like that.
There are many calculators on line for estimating the cbd or thc content. It's just an estimate. If you want exact you have to test the finished product either in a lab or one of the testers at home.
I stumbled on This video by accident and i have to ask IS IT JUST ME ? Every time i think of some thing UA-cam shows a video about what i was just thinking WF!!!!!!!!! going on !!!!!!!!!!!
Your Wi-Fi is doing that.
Do your ears ever ring for no reason?
Some folks can hear the frequencies.
What dose do you recommend to use in cases of insomnia?
Ive tried many. They all work. Have never seen or heard of this one. I will try and get back with results
Great video! Thank you so much!
My question is what would be the dayly dosages of cbd oil? Thank yo
Hello madam, Can I skip sun flower lecethin?
I was just wondering where I can purchase the cannabis flower in Australia?
Sooo happy that I found this ‘how to’ guide. It’s saved me ton of time!
Awesome!! It's definitely much faster than some other recipes we've tried.
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
Holy crap! This works so well. This is gonna save me so much money.
how much would you take??
hey are you sure this is "cbd oil"? this looks like thc oil to me not cbd. ur using regular cannabis am i correct? cuz if so then this is gonna have a lot thc compared to cbd
Doing this is going to save me SOO much $ money $
Hey dude
I’m glad to hear.
Do you have a majicalbutter machine at all?
They start at about $400’ish for the new MB2 machine which my one about five years ago saved my life with my illness and I wasn’t able access to the medicines I needed to I had to learn and I started everything just in the kitchen until I got the first model MB and you can get 95-96% grain alcohol online for about $120 for a 750ml bottle, and same with the MCT oil, cheap and easy to get online 👍🏽
Hope you’re still going strong homes 👊🏽
I made it and took a bit last nite but i still feel bit anxius. Shuld i take more? how much is right?
does it even work without leycetin? How much % does this CBD will have at the end ? Thumbs up :)
I made this last night. It was great! The best recipe I tried. Thanks for making recipe videos. You guys have more videos right?
Hi , u did make CBD with thc
As a chemist, I believe the decarb box should have a stainless steel inner, to prevent potential unwanted contaminants.
Steel inner ? Glass container is best solution
The MB decarb box is made of food grade silicone. Works great every time and the thermometer is truly the bomb and gives consistent results every time.
@@JohnJohn-wr1jo I stand corrected, thank you.
@petrosstefanis6234
No problem. Been making oil for a while and initially decarbing with foil on a sheet pan. The box simplifies the process with more consistency in my opinion. Just sharing what works for me. Thanks for your reply.
Hello,I'm in Perth,where did you get that liquid coconut mct oil please?
health food shop , got mine at the midland gate
Woolworths also sells MCT oil
Great job thanks for the recipe
I laughed also when pouring the mct oil especially knowing the bottle itself was exactly two cups 😂😂😂
Great video, thank you 😊
Where can i order the magical machine
We’re do you get the decarb box from my wife as bowel cancer and she was told she can not have any treatment and as less then a year to live so I’m trying to make oil
Hi there!
Can I use honey instead of coconut oil?
Loved the video, its soooo helpful 🙏🏻
You can definitely create canna-honey in the MagicalButter machine by swapping out the coconut oil. You might want to adjust the ratios though, as there's 500ml of oil in this recipe.
Can you youse this for injury ❤ pls and thank you
i made this like 17 times and it turned out so well all the time!! love from - down under
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
Mine starting to smell weird after 3-4 months :(
i do not think we need to decarboxilate the buds because we are heating up the oil to release the medicine, why not release right in the oil and not lose anything?
Muchas gracias por su video está muy bien explicado el mejor de todos ,muchas gracias 🙏🙏🙏🙏
can i use the strained flower in a slice
Great video, can i do the same with TCH to get the oil
Was that weed dry before decarb?
Is there one with out the canna butter machine
Too hard.
I really need them to legalize in GA . I want to grow and make CBD oil so bad. I had no idea it was this easy
100%...can't wait for legalisation!
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
And hemp and cbd oil is legal in the u.s. it's a part of the hemp act, why you think you can order hemp flower and oil ordered right to your house from many websites? Check it out, it's legal across the board
Wdym? Just order CBD online and make you some oil
Maybe the next video can be how to make hash brownies??? Great stuff!
I wonder if there is food grade vitamin E that can be added to help prolong the shelf life?
Thanks for sharing this video to save money.
What is the purpose of adding the sunflower lecithin?
Hey Jesse, adding lecithin further emulsifies and binds the cannabinoids with the oil. Lecithin increases the bioavailability of cannabinoids like CBD and THC because it is a phospholipid. Phospholipids help cells absorb compounds more effectively. In saying all this, you can make the oil without it.
Also, why just one hour?
Will a longer cycle draw more cannabinoids out?
I infuse for about 4 hours.Definitely draws more CBD 👍
As long as you keep the temp at 160 u can go longer. Wouldn't go higher
Turned out super satisfying to make my own!!
Loved the video, thank you!
excellent video you expose many interesting things, I liked the channel
You guys / girls are dead set LORDs - Keep it up!
Guzan David, something about your comment tells me you're also a LORD
Can you press the 2 hr or 4 hr setting on the MBM & what happens to potency if cooked longer in the MBM ?
why not use Hemp oil?
Does this recipe make a full spectrum CBD oil? My friend mentioned that full spectrum oil is the best for you, and thats what he takes as well.
Good vdo, thanks
what is the setting on the oven for US?
275 F - Min 4:48 shows the temps in both C and F :)
Can you also use Extra Virgin Olive Oil?
Using this recipe can I put a couple drops of this under my tongue or is this ment for something else ?
would you rate it on par with medicinal CBD oil? Is it possible to make it stronger than medical? CBD content for pain.
Impossible to compare to medicinal products, they use entirely different equipment, extraction processes, specific genetic breeds and varying cannabinoid ratios to create their products. Plus it's unique to each manufacturer. If you want to make the oil stronger add more CBD bud to the mix 👍
@@hinterlandco.8346 Appreciate you explaining that and I kind of thought that would be the case. Yes I intend to use a 16% CBD bud for pain management. Thanks for getting back.
@@cokeman9135 If you've got bud, you can try using a dry herb vape to get almost instantaneous effects. I use the Storz & bickel Mighty, it's really good. Hope it all goes well and you get some relief!
@@hinterlandco.8346 mighty looks great- presently I use da Buddha and pax 3 - ball vapes $500 are the new technology but sold out - just ordered the magical butter machine yesterday de carb model
Ill second the S&B vape but pass on the CBD flower. That shit is nasty when smoked or vaped. Plus your body absorbs and processes a much higher percentage of the CBD or THC with the MCT than vaping. I was amazed at how much less flower I was using when ingesting vs vaping once I purchased the MB Machine and started making the oil. Easily cut my monthly THC flower usage in half.
Tried it and came out perfect 10/10. Peace out my fellow hippies
Why you use 135°C? I thought that it has to be 121°C for 30min in the oven. Have I done it wrong?
Please please please answer me 🙏🏼this will a great help in curing my condition.
A research suggests to use ONLY Trichomes of Indica female flowers
(Cannabis indica for crohns
200-900mg
Oil extracted from Trichomes (NOT seed or leaves) of female flowers. )
How is it possible to ONLY find Trichomes? And how much would I have to use to get 200-900 mg CBD?
If you can please help?
Information relayed to me from a reliable cbd oil maker said the best cbd is made from half and half. Which is the way Rick Simpson oil is made. Example: if you were to use 14g, 7g decarb 7g raw.
Craig, i think your confusing 50/50 CBD to THC. The MB Machine doesent decarboxalte the flower so all your doing is wasting those 7 grams.
Can you add the lecithin AFTER? So lets say you made CBD oil in the Magic Butter without adding or forgetting to add lecithin. Can you add it afterwards??
I wouldn't add it in after the extraction, there isn't much point at the stage. There are heaps of recipes that don't include lecithin and I've also made a lot of oil without using it, your oil will still be great :)
@@hinterlandco.8346 Thanks for the reply, highly appreciated!!!
Great tutorial. Thanks!
How much time and temperature for 3 oz.
Tia
Same time and temp regardless of the amount. It's important to make sure the product reaches temperature before starting the timer
Can powder lecithin be used instead of liquid ?
Hey Daran, unfortunately they aren't interchangeable, I think we covered everything in the email :)
Hello i made the Cbd oil with the same machine and the oil you recommended and i stored the oil in dark bottles for 5 months in a dark cold place. But the oil starting to have bad taste. Why does it happend all the time?
What else can you use the butter machine for? It sounds great, but I don’t want to spend all that money just to make oil.
.. butter.
I infuse heaps of plants/herbs/leaves and make creams for natural body care
Hi I'm thinking of buying one and I am wondering is it OK to reduce the quantity of oil let's say 2 cub of oil with 70g of herb for a more potant mix? Or what would be the least amount of oil I could use ? Thanks
MB machine minimum batch is 2 cups per their instructions. Less is probably not gonna allow the grinder to do it's job.
I've never run more than 42 grams in a 2 cup batch. I've read that the mct oil will only bind so much cbd or thc. After that point it's likely a waste of product unless your processing the "sludge".
How much CBD does it contain? Pls reply
Where do you buy all the tools ?
Hi Daran, check out the article in the video description (below the video). There's an article with a link to buy all these tools
Don't need tools... All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
Them: The perfect woman doesn't exist.
Me: Allow me to direct your attention to the following video! 😁
i live in Canada and sometine there is shortages in stor of Coconut oil (liquied) but I could find coconuat oils solid. Do I have the same amount for infusion or being solid the oil changing the volume make me confused. So, what would be the proportions of coconuat oil solid for 2 oz cannabis if don't mind. THANK YOU!
Hey there, i'd suggest melting the coconut oil down and using the exact same measurements as recommended in the video. 2 cups of oil per 14g (.5 oz) of flower. So for 2 oz flower you'll need 4 cups of coconut oil.
@@hinterlandco.8346 1 MIL++ THANK YOU! 😘💘❤❤
I made it! 😍 Great easy recipe ❤ thank u
You're welcome, glad you like the recipe.
but did you notice anything? because 14 gram with 500 ml, if you have 14 or 13 % cbd and then you make a lot of bottles, the miligram in each bottle will be under 50 mg cbd
Hi new on your channel, where can buy de carbonate container , thank
Magic Butter Machi e manufacturer sells these separately or as a kit with the ma hine.
Only 1 hour? Mine is in waterbath for 4.5 to 6 hours 🤔
Is it possible to make the CBD oil at home without the machine? If so, what could we use?
Hey there, you definitely can. You can check out our recipe that has an alternative method if you don't have the MagicalButter Machine. Recipe here - hinterlandco.com.au/how-to-make-cbd-oil/
@@hinterlandco.8346 hello i couldn’t find the other alternative :/
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
How can I figure out the dosage? I don't want to take too much in one go.
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
Does it still keep the thc in it newbie here or is it just cbd.
Yes it does. This method is a whole plant extraction meaning it will retain all naturally occurring compounds in the plant, including both CBD and THC. The type of bud you use will determines the concentrations of CBD and THC. Commercially grown hemp usually contains up to 0.3% THC which is a very small amount, whereas marijuana has much higher concentrations. The end result depends on the bud you use to make the oil.
@@hinterlandco.8346 Thank you for the reply.. Is there any alternative to the coconut oil.
i don't have all the machines you used but I wanna make CBD oil so bad to try if it'll work on handling my psoriasis since CBD oil is illegal in my country (but I know where to get the leaves illegally)
Just make proper oil with the THC in there too. CBD on it's own is pure snake oil.
what dosage per mg is does this work out to be?
Hey Ash, unfortunately one of the pitfalls of making your own CBD oil is that you aren't able to get an accurate strength (unless you get it tested). We'd recommend starting low and going slow with the dosage, start with one or two drops and titrate up until you feel beneficial effects.
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
Hey, awesome content! Do you know what percentage % the CBD comes out at for the final product?
Unfortunately, there is no way to determine the concentration of CBD unless you wanted to find somewhere to test it. Given this, we recommend starting out with low doses and slowly increasing the dosage until you feel the therapeutic benefits.
All these methods are so ridiculous and a low strength oil... use cbd isolate it's active, water soluable, and tasteless... I just mix cbd isolate with coconut oil until it dissolves, poof good to go... every 1 gram of isolate equates to 1000mg cbd... soooo easy and strong oil so don't have to drink a whole cup to get your dose
I so can't wait until it is legal here... it is ridiculous that something so helpful to so many people that can be grown at home relatively easily is illegal.
hemp is legal in all states
@@truthonly7699 THC isn't.
Just gotta make sure I don't mix it up with the olive oil!
Why didn’t I buy this machine 20 years ago?
haha we feel the same way!
What happens if my machine doesn’t grind the flower at all?
Hi Melody, you should probably reach out to MagicalButter Machine to discuss the issue with them. During the infusion process the blender should break up the flower.
Thc oil
Why do you need to decarb CBD since it’s not psychoactive anyway?
Can you sub out coconut oil with something else?.. that stuff is really bad for you.
She smoked before shooting for sure.
Haha
She's a he
Uhmm
What a joke 😂. You cant use regular flower thats mainly thc you will get people way too high.
Don't use soy lecithin, stuff is straight poison and completely unnecessary. Also you don't need an unnecessarily expensive butter maker, just a pot with water and some jars do the same thing. Use a coffee grinder for your flower after de-carboxylation and use a natural cloth like cheesecloth for the straining. This video is a sales pitch from a hot lady
And where have you read about lecithin being poison?? I need the link..because I've never read that, soy lecithin is not as good for you as sunflower lecithin..it ain't poison though lmao..it's a emulsifier
@@emoneymichael3077 Do you know what an emulsifier is? That doesn't mean it's safe to consume... Dawn dish soap is an emulsifier because it mixes fats and water. Emulsion is just mixing two liquids that don't normally mix. Sunflower lecithin is a toxic seed oil, maybe marginally less toxic than soy, but not enough to matter for human health. It has too high of a ratio of Omega 6 to Omega 3 fatty acids, and is naturally rancid from processing, like all seed oils processed through heat are. When was the last time you saw a sunflower leaking some kind of oil? Why would it be safe to consume a mass extract from a plant that grows it's own toxins to keep animals from eating it, through a heating process that naturally turns the oil rancid? All seed oils that aren't cold pressed go through a deodorization process to make them seem like they aren't the completely vile cancer and heart disease causing filth that they are. I just explained why all fast food is so bad for you, and the diseases of modern civilization. It's seed oils
Burnt.
Min725 😂😂😂😂😂😂😂
haha the realisation this bottles gonna take a minute to empty
@@hinterlandco.8346 and the loud ass bubbles 😂😂
@@mmm4638 😂 we're just keeping it real around here
@@hinterlandco.8346 I love it 😂
I’m so confused... I don’t want THC in the final product...
Would have liked to watch this but like so many ignorant UA-cam posters, this person just had to add annoying irritating, and distracting background "music" rendering (to many) the video unwatchable.
Forgot to mention takes awhile to each temp haha
Turned out super satisfying to make my own!!
Is it possible to make the CBD oil at home without the machine? If so, what could we use?
Yep, definitely! You can make it using the stovetop method using good ol' fashioned pots and pans 😆 we haven't filmed this method but you can follow the recipe in this article we wrote (look for the section titled 'alternative method': hinterlandco.com.au/how-to-make-cbd-oil/