Thank you for the informative series you have done on this project. Very helpfull. Now that you have run it for a while, how are your experiences with this setup? Any changes you would like to make to your design?
I cannot stress how much i thank you for your free information on this cnc convertion. I will make it with motore spaces instead cause i already purcase the aluminium parts and i just now figure out your site! My mill is about the same model from a different brand(vf25L from cau cau). I would like to ask you if your NEMA34 motors do you any problems for standing a litle proud above tha milling table. I already have them so i would stick on NEMA34 steppers to. Anyway i will be watcing you. Great work my friend, subscribed offcourse..
Welcome and thank you for the very kind words ! The motors used are working absolutely fine for me since they are outside the working envelope. Also If you would want to machine bigger parts it is not very common to place it flat on the surface since you will probably prevent the cutter from touching the table.
@@RoboCNCnlDear friend, thank you so much for letting me know that you are back again! Although I keep following you, unfortunately I had missed your last video from September. I'm really happy you are doing well and you keep going. I wish you the best! Kostas
Altijd kijk ik met veel plezier naar deze step by step video's van je. Je werk ziet er altijd tiptop uit !
Bedankt Bouman !
Thank you for the informative series you have done on this project. Very helpfull. Now that you have run it for a while, how are your experiences with this setup? Any changes you would like to make to your design?
Thanks Trimasi, Actually I have not had the time to spend playing with the machine.. So I can not yet answer your question.
Good day Sir! Great job is done! Could you tell me how ball nut is mounted? I don't see any ball nut mount/holder
Witgh the normal bolts in the saddle and table.... just like the original one..
I cannot stress how much i thank you for your free information on this cnc convertion.
I will make it with motore spaces instead cause i already purcase the aluminium parts and i just now figure out your site!
My mill is about the same model from a different brand(vf25L from cau cau).
I would like to ask you if your NEMA34 motors do you any problems for standing a litle proud above tha milling table.
I already have them so i would stick on NEMA34 steppers to.
Anyway i will be watcing you.
Great work my friend, subscribed offcourse..
Welcome and thank you for the very kind words !
The motors used are working absolutely fine for me since they are outside the working envelope.
Also If you would want to machine bigger parts it is not very common to place it flat on the surface since you will probably prevent the cutter from touching the table.
As always, excellent job!
9 years ago... Hope you still follow along, subscribed and check the latest vids !
@@RoboCNCnlDear friend, thank you so much for letting me know that you are back again! Although I keep following you, unfortunately I had missed your last video from September.
I'm really happy you are doing well and you keep going.
I wish you the best!
Kostas
@@KonstantinosKalleris Nice your still subscribed ! Click the bell icon for notifications 🙏🏻
Thanks ;) !