Peacock cutting board. CNC Inlay. Wood inlay. Inlay cutting board. BroinwooD
Вставка
- Опубліковано 12 чер 2022
- How to find inlay parameters.
broinwood.com/products/how-i-...
Wood: walnut, yellowheart, dark cherry.
Feed rate v bit 30ipm amzn.to/3wf9Txg 👍👍👍
Feed rate flat nose 1/8 40ipm amzn.to/3izKXcF 👍👍👍
For orders go to broinwood.com/pages/custom
Check out our Instagram page / broinwood
broinwood.com/
Drawing by Bohdan,
check out his IG page @petrushko_bohdan
/ @bogdanpetrushko3425
/ boordon.design
boordon@gmail.com (if you need a custom illustration, please contact him)
🔥🔥🔥Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.🔥🔥🔥
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:👍👍👍
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
My Random Orbit Sanders I love how they work but they get a little dusty:
amzn.to/36u5mxs
amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
amzn.to/33uGmnS
My Sanding Disc (for me they are the best!!!):
3M Cubitron II
amzn.to/2SrnAHs (80 and 120 grit)
amzn.to/2SqlvvH (150 grit)
amzn.to/3nksyUQ (220 grit)
amzn.to/2GriKaZ (320 grit)
My router bits which I use a lot:
My favorite router bit!!!:
Metric CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose (clean cut, long life, definitely recommend) 👍👍👍
amzn.to/3wf9Txg
2D & 3D Carving 12.4 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64
amzn.to/3sviUAl (clean cut, long life, definitely recommend)
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
amzn.to/3izKXcF
15 Degree v bit (be careful easy to break down)
amzn.to/3izLyLr
Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
amzn.to/2SsZYlV (I use it for juice groove)
1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
amzn.to/33v99Zm (I use it for juice groove)
Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
amzn.to/2SsB8m7
Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)
Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)
My Collet Set:
amzn.to/33xbO4X
My DEWALT Plate Joiner:
amzn.to/33xtkWQ (it is not bad and not good it is ok)
My Bandsaw Blade it is inexpensive and cut well:
amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel!
I appreciate your likes and subscriptions!
Sincerely,
Nik. - Навчання та стиль
How to find inlay parameters. My first own 20 minutes tutorial.
Link for purchase.
broinwood.com/products/how-i-am-finding-inlay-parameters
A little sticker shock, but found the course very enlightening on your method. Most revealing was the calibration on each bit. Time consuming, but yields the great results that you produce. Quite frankly, I understand the need to charge for sharing your knowledge and I know that my boards will improve greatly having learned from the master. Thank you.
Thank you for your comment! 👍🙌😊
@@bbgakame I had the same apprehension, but I'm so glad I pulled the trigger on this purchase. The way I see it, I saved countless hours creating my end-grain boards using the guidance from the video. Sounds like it worked out for you as well.
Beautiful work!
Отличная работа 👍
Beautiful 👍👍👍. Thank you for sharing. Be safe 🇨🇦
Another beauty thanks for sharing
Beautiful board like always!
Thank you so much!!!🙌
Another great piece! I always look forward to your videos to see what great art work you will come up with next.
Thank you!
Another great one. Nice work.
Nice Save!
damn, thats one accurate machine
Top Artistic work..Keep it up.
great work Buddy :)
Great board and video!
Thank you!😊
Insane🤯🤯🤩🤩🤩🤩🤩🤩
excellent
That looks awesome! Looks like a great project for PixelCNC, which is what I have been using for a long time for generating all of my toolpaths. It's great for art/sign type projects. Right now I'm designing our new address sign. I had an idea to make a new one every month or two and have seasonal address signs for our house, just for fun :)
Nice❤❤❤
I would have used purple heart for this bird !
Amazing. I want to work here :)
Subbed
You obvious get accurate indexing with the hold down method you use. I have typically used some dowels on the spoil board and bottom of the project.
What was the third wood you used? Walnut. Yellow Heart and ?????
dark cherry, thank you.
Dope! Thoughts on using smaller slabs for inlays? I'd be curious to see what an inlay looks like with one continuous grain on it for textures
When doing detailed inlays like this you have to use end grain. The fine details usually snap off when using face grain like a slab.
Absolutely right!
Love the piece. I hope someday to make something half that impressive first. But apparently I missed or missing something. Why does it glow in us light? Is just a natural appearance of what I believe maple against walnut and other darker woods?
Thank you!
It is a reaction of yelowheart to a UV light.
Nice machine design. I have made my own CNC router from scratch as well. I am wondering, are all your designs original artwork? Is there a repository of digital files with the detail of the pieces you produce? I have done simpler work using Fusion 360. Is V-Carve Pro a requirement for work of your quality?
There seems to be something wrong with the stream🤔
I notice that on some of your projects you use a clearing tool first and other times the V-bite BN. Any particular reason or criteria?
По мотивам русских народных сказок? ☺ Красиво
i'm wondering
why you are not using a bigger insert to go over the faces?
wouldn't it be more efficent to get rid of it in a couple of turns?
you put the boards through the shaper and get over with the grinder anyway :)
Based on my experience, very small errors in the machine tramming will be exaggerated over a two inch bit compared to a 1/4" bit. This causes a very small ramp on each pass noticable over 2", but not over 1/4". My self built WorkBee exhibited this and was very tough to trammel. My $.02.
Awesome piece!!! What type of CNC are you using?
Thank you! It is a self-built machine
Жар-птица
Great work as usual 👍.
One question though: what machine and software do you use?
Thank you! It is a self-built machine, Vcarve pro
@@Broinwood impressive 👍
I would never use that for a cutting board, as it is too beautiful. I'd hand it on a wall as a piece art.
He could make it bigger for a table?
I bet you use press for "clamping". Can you tell me what is the time of pressing? Is 2-3 hours enough? does it depend on the drying time of the glue? If I use fast drying glue can i speed up the pressing process?
thank you
You are right i am using a press. Pressing time is about 10-30 minutes.
@@Broinwood How mush pressure do you use with the press?
What CNC brand machine do you use?
It is a self-build machine
Is that 4/4 walnut?
Yes
What is the name of the machine you use?
It is a self-built machine.
@@Broinwood Magnificent, I want one, but I'm too far 😢
Добрый день, из какого дерева делаете.
американский орех и вроде лимонное дерево
@@mrSanders. спасибо
все верно
Would’ve been a good video if it wasn’t for the useless music