I love what you did with this power wheel !! I have been wanting to do one too for a few yrs but because of health problems I couldn’t. I’m a 66yr old man , I’m retired and handicap too so I can’t do much but I love repairing R/C cars & trucke and give them to children that are not able to have means of buying one. After watching your video I’m really charged up no w to build one, that you so much for sharing your video !! Thanks again , Bill.
Was that a window regulator motor? If so, did you just connect a servo connection wire to the motor? And is the 6 volts on the receiver powering the steering motor? I just need to know how exactly you did it so that way I build my own next week
@@KCreations4You I’m excited to see what you do to it. I have a little Mini Cooper that I’m thinking the same thing you are. Bigger is better. I wanna build it then send it 😂
I’m trying to make a winch, I’m wondering how to use that esc with a rc car transmitter. Your solution is good, but there has to be a easier way haha. If I can’t find anything ima just send it with that. 48v-54v esc-rc transmitter. Thanks
@@KCreations4You Yes it is. I am trying one but I have no knowledge if we can use toy car RC to run the heavy car. some ppl told me that it doesnt matter since power will be depending upon Motor. In my case I am using RS-775 motor to give that power to it.
@@ImranKhan-vz2hf That motor should work they are used in power wheels. You should also be able to find a brushed speed controller pretty easy. There are soo many directions you could go. If you do two motors you could steer it like a tank with out making a steering servo and it would have more power.
@@KCreations4You Yes I have got 2 Motors. only concerned thing is if Any Remote Controller Chipset would get attached to it or I need to get some heavy duty RC Chipset for handlling 2 motors?
I had to google that right away. Those are awesome and yes you could it would take more work though. You would need to build the drive train Kind of like a video I have planned for the power wheels in the future.
Those motors run at a standard 9.6v right so couldn't you have just used the ESC/speed controller from an old RC for throttle or am I missing something.
They are 12v and an ESC from an RC has been done and do work. Part of my underlying goal was for it to not make it through so I had a transition to Part 2 that I did. I also don't like to do the exact same as whats been done before.
@@KCreations4You no videos at the moment, its been rc but petrol for about 5 years but ive just converted it from 50cc petrol to electric and given it full autonomous ability, tried to post a link to pics of it as a petrol and how it is now but your channel has links banned. if you go to my channel and the most recent video, the video you want is me misbehaving with train horns lol, i have posted the link there in the comments section.
@FU 50cent Those Razer Drifters are awesome! I never new about them. My plan had been to either use a treadmill motor like the one I used for the Ebike build I did or use a car alternator rewired as a 3 phase motor and hooked up to a 1500W controller. I will have to keep my eyes out for a Razer for sure as I will need an axle and brakes this time. Thank you!
I believe he's asking about the Barbie power wheels car that is similar to this car so if that is the case then the answer would be an obvious "yes" yes he can. I mean in reality the answer would always be "YES" . The fact is if someone wanted it bad enough they could make a remote controlled bicycle, a remote controlled ice chest a remote controlled chair haha my point is if you have the money, skills and ambition then you can build just about anything. Back to the Barbie car I believe it's been done (?) and it would be rather simple relative to the build at hand I would pimp it out and go big on the motor though!
You are genius i couldn’t found way to make my throttle work
Thank you. I hope this project is not done but I got a lot on the burner.
This was absolutely amazing thank you for sharing
Your welcome and Thanks for letting me know. I'm planning on having another video on it this summer if all goes well.
This is what i was looking for, great build. It could use that ESC for power control
Cool stay tuned more episodes on this thing on their way
You've accomplished a life goal of mine lol
I love what you did with this power wheel !!
I have been wanting to do one too for a few yrs but because of health problems I couldn’t.
I’m a 66yr old man , I’m retired and handicap too so I can’t do much but I love repairing R/C cars & trucke and give them to children that are not able to have means of buying one.
After watching your video I’m really charged up no w to build one, that you so much for sharing your video !!
Thanks again , Bill.
It makes me really happy to hear all of that. I have many ideas yet for it and another one in a different direction so I hope you enjoy those too.
Cool stuff 😎 👌 keep up the good work my man
I love you idea, I'll like to make something like that for the kids, and maybe you idea for the real cars.
Thank you I hope I can make a real car into one one day. Growth is a little slow so It may be a bit.
Dude that's awesome I have a 1year old I need to do this for him so he can ride the power wheels I got him lol
You should share is when your done!
I have a little fella that'll be one soon. Send on any tips or guides you used!!
Part 3: So about that throttle I rigged....
As always looks great!
Thank you.
I just wanted to let you know your videos are awesome
Thank you!
Was that a window regulator motor? If so, did you just connect a servo connection wire to the motor? And is the 6 volts on the receiver powering the steering motor? I just need to know how exactly you did it so that way I build my own next week
I have a video on it.
AWESOME.
Thank you. Part 3 is in a month or so if all goes well.
I like it but man let me tell you. You went a very creative route.
I agree I could have spent a lot of money and made it simple but I like making stuff and don't have a huge budget.
@@KCreations4You I agree I would like to see you take two of those motors from your rc and Install those on there
@@nickvilla180 This project will be back. I already have some stuff for it. :)
@@KCreations4You I’m excited to see what you do to it. I have a little Mini Cooper that I’m thinking the same thing you are. Bigger is better. I wanna build it then send it 😂
@@nickvilla180 Sounds awesome!
Cool video!
How well do you think that wiper motor would on a lawn tractor? A remote lawn tractor would be safer for steep hills
I think it would hold up well.
I aspire to know how to do this someday soon
I will be doing more in the future.
I’m trying to make a winch, I’m wondering how to use that esc with a rc car transmitter. Your solution is good, but there has to be a easier way haha. If I can’t find anything ima just send it with that.
48v-54v esc-rc transmitter. Thanks
If you don't hook up the potentiometer it will work as a winch. Hope that helps.
Bought a VW van to convert. So glad I found this video. Is that servo from a car door?
Its a wiper motor
My niece is 4 and can't quite be trusted behind the wheel yet. I think this might be the way to get her started.
You could hook up a remote for killing the throttle easy enough. One small servo going to a switch is all it would take. If that would help?
Part Two will be Epic! Should I make it a series?
It is Amazing. please make a video on How to make Kid Push car to a Remote Control Car. If it is Possible.
@@ImranKhan-vz2hf That sounds like an awesome Idea!!
@@KCreations4You Yes it is. I am trying one but I have no knowledge if we can use toy car RC to run the heavy car. some ppl told me that it doesnt matter since power will be depending upon Motor. In my case I am using RS-775 motor to give that power to it.
@@ImranKhan-vz2hf That motor should work they are used in power wheels. You should also be able to find a brushed speed controller pretty easy. There are soo many directions you could go. If you do two motors you could steer it like a tank with out making a steering servo and it would have more power.
@@KCreations4You Yes I have got 2 Motors. only concerned thing is if Any Remote Controller Chipset would get attached to it or I need to get some heavy duty RC Chipset for handlling 2 motors?
So awesome dude.. i have allways want a rc toy car like that but cant build that.. nice😃🤙🏻
Thank you. There will be a part 2 this summer! Should be faster but haven't made the video yet.
Radio flyer has ride on cars for kids, is it possible to make one of those remote controlled?
I had to google that right away. Those are awesome and yes you could it would take more work though. You would need to build the drive train Kind of like a video I have planned for the power wheels in the future.
Hello. I want to do this for my son where can I get the motor for the steering ?
Its a wiper motor I have a video on how to build it.
Those motors run at a standard 9.6v right so couldn't you have just used the ESC/speed controller from an old RC for throttle or am I missing something.
They are 12v and an ESC from an RC has been done and do work. Part of my underlying goal was for it to not make it through so I had a transition to Part 2 that I did. I also don't like to do the exact same as whats been done before.
mine has a Pocket quad bike frame lurking under the body :)
You really need to share some pics or a video of that!
@@KCreations4You no videos at the moment, its been rc but petrol for about 5 years but ive just converted it from 50cc petrol to electric and given it full autonomous ability, tried to post a link to pics of it as a petrol and how it is now but your channel has links banned. if you go to my channel and the most recent video, the video you want is me misbehaving with train horns lol, i have posted the link there in the comments section.
I would pay you to make one of these for me. One that holds weight and goes faster.
I am looking at making it faster but not going to build to sell, sorry.
That was awesome. Do you think it could hold weight and still move?
Yes and next time someone is getting a ride in it when I make it faster!
@FU 50cent Those Razer Drifters are awesome! I never new about them. My plan had been to either use a treadmill motor like the one I used for the Ebike build I did or use a car alternator rewired as a 3 phase motor and hooked up to a 1500W controller. I will have to keep my eyes out for a Razer for sure as I will need an axle and brakes this time. Thank you!
Needs brushless power
I might one day.
It's me your son's friend
Hi
Could you do this to a Barbie car?
I am a little confused what your asking.
I believe he's asking about the Barbie power wheels car that is similar to this car so if that is the case then the answer would be an obvious "yes" yes he can. I mean in reality the answer would always be "YES" . The fact is if someone wanted it bad enough they could make a remote controlled bicycle, a remote controlled ice chest a remote controlled chair haha my point is if you have the money, skills and ambition then you can build just about anything. Back to the Barbie car I believe it's been done (?) and it would be rather simple relative to the build at hand I would pimp it out and go big on the motor though!
Hi
Hi
Now mount an ak to it and ship it to myanmar
I'm not sure about an AK but a couple paintball markers would be a blast.
@@KCreations4You that would be cool
Will you ship this to me I pay some hard learned cash on it
:) Sorry not for sale.
C'mon man, don't you have a little dog to 'drive' it? Looks really slow for 48v.
I was hoping it would be faster as well. I will keep revisiting this and hopefully it gets better each time.
Please contact. I have a special project for you.
What the project?