if marami fans mo bili ka boss ng argb hub para dun mo nlng iplug lahat ng argb connections. marami mura sa shopee make sure if argb sayo na 3 pin yung bibilhin mo.
Before mag add ng fans make sure marami pwm headers and argb/rgb headers mo. Sa fans pwede man splitter na 3 fans to 1 header. Sa argb nman may hub kase ako dun na lahat sabay nka connect.
yes. check also if ilan argb or rgb header ng mobo mo. then based dyan plan ka on how to hook up your lighting if need mo pba ng argb hub kase like skin nag hub ako kase 9 fans ko and dalawa lng argb header ko. plan every thing lng paps.
Every time na ion ko yung UPS or yung power supply switch nag bblink 1 time yung mga fans, okay lang ba yun? Hindi ba delikado na may masira parang pumapasok agad yung kuryente kahit hindi ko pa ino-ON mismo yung cpu?
Sir, medyo di lang kasi ako maalam sa hardwares, nagpabuild kasi ako tapos eto ung fans na ginamit pero after 2 weeks di na nakokontrol yung colors nya. Nakadefault nalang di rin macontrol sa RGB Fusion. Baka may advice ka, thanks!
@@miketech422 Did it for like 3 times wala parin di talaga nagrerespond. Sa Ram and Mobo light nagrerespond naman, yung sa fan lights ng Idcooling lang talaga hindi
Hello po.. Ask ko lang po if pwede ba sya e daisy chain yung isang bakante dun sa splitter ?Kumbaga (Splitter to splitter to mobo bali 6 fans po) Ask ko lang if safe po sya wala bang mangyayaring short circuit or etc. ?
I bought a gaming pc 5 months ago now i feel my pc case fans got problem whenever i turn on my pc normally my pc case the front,rear and top will spin to max speed for a while then it goes back to normal speed but now i notice that my rear and top fans when i turn on my pc it will not spin until the mobo logo comes out but the front fans they are fine Is this a issue? or normal? its kinda annoying to me But it only happen sometimes My case fans are id cooling df-12025-rgb
Thank you for the video awesome stuff
i like the way you explain everything sir, I enjoyed watching your video keep it up
thanks sir. Hope to give you better and clearer audio soon :D
question po, kapag icoconnect sa controller. Sang header po sa mobo isasaksak yung pwm? Gamit ko pong mobo is asus b550a II wifi.
Eh paano naman kung walng rgb argb yung mobo ko? Papano po installation? Wala kasi sa vid sayang
Nice content lods 👍 Keep it up! 👌ask ko lng lods pano setup kapag 6 argb fans ang ilalagay ko 1 slot argb header lng available sa mobo ko?
if marami fans mo bili ka boss ng argb hub para dun mo nlng iplug lahat ng argb connections. marami mura sa shopee make sure if argb sayo na 3 pin yung bibilhin mo.
@@miketech422 puwede po ba kahot darkflash hun tapos id cooling yung argb fans na ikakabit?
@@miguelesteban8775 as long as parehas sila argb it will be fine
cool looking cooling fans bro. bago mong tagasuporta.
Salamats lods. Hehe maybe need mo editing rig sa mga videos mo you know what to do hahaha basta ang ganda ng quad piston shet haha
Sir how to add more fans and mag add din po sana ng aio tapos magkaka sync sila lahat? May additonal po na kailangan cable?
Before mag add ng fans make sure marami pwm headers and argb/rgb headers mo. Sa fans pwede man splitter na 3 fans to 1 header. Sa argb nman may hub kase ako dun na lahat sabay nka connect.
can i still control the rgbs without the argbs header using the remote? love your videos.
yup
yes. check also if ilan argb or rgb header ng mobo mo. then based dyan plan ka on how to hook up your lighting if need mo pba ng argb hub kase like skin nag hub ako kase 9 fans ko and dalawa lng argb header ko. plan every thing lng paps.
Musta po reliability? May clicking sounds daw po pagtumagal
Wala pa nman issue still silent lodi hehe
Every time na ion ko yung UPS or yung power supply switch nag bblink 1 time yung mga fans, okay lang ba yun? Hindi ba delikado na may masira parang pumapasok agad yung kuryente kahit hindi ko pa ino-ON mismo yung cpu?
Hmmm d ko pa na experience ang ganyan lods. Pag on ko ng surge protector ko or psu wala nman short blink hmm
Sir, medyo di lang kasi ako maalam sa hardwares, nagpabuild kasi ako tapos eto ung fans na ginamit pero after 2 weeks di na nakokontrol yung colors nya. Nakadefault nalang di rin macontrol sa RGB Fusion. Baka may advice ka, thanks!
Hala. Try update or reinstall ang fusion sir
@@miketech422 Did it for like 3 times wala parin di talaga nagrerespond. Sa Ram and Mobo light nagrerespond naman, yung sa fan lights ng Idcooling lang talaga hindi
Sir tanong lang po, per ARGB header sa mother board 4 fans lang po ba ang ma cocontroll nya?
Nice intro idol 🤘
Thank you dn kuya idol
Hello po.. Ask ko lang po if pwede ba sya e daisy chain yung isang bakante dun sa splitter ?Kumbaga (Splitter to splitter to mobo bali 6 fans po) Ask ko lang if safe po sya wala bang mangyayaring short circuit or etc. ?
Are these ARGB fans compatible with a B550m plus wifi asus motherboard?
If there are 3 pin argb headers then they are compatible ☺️
I bought a gaming pc 5 months ago now i feel my pc case fans got problem whenever i turn on my pc normally my pc case the front,rear and top will spin to max speed for a while then it goes back to normal speed but now i notice that my rear and top fans when i turn on my pc it will not spin until the mobo logo comes out but the front fans they are fine Is this a issue? or normal? its kinda annoying to me
But it only happen sometimes
My case fans are id cooling df-12025-rgb
Im not sure on that issue. You can bring your pc to your closest computer store so that they can physically check it out.
Very informative video. Ang galing naman po.
Salamat po lodi appreciate ko po
Lods pwede mag tanong, pwede po ba i sync iyan sa ygt cla 2400 air cooler argb siya..
Yes lahat ng fans basta same na rgb or argb pwede ma sync ng software ng motherboard
sir, ung HA-02C aRGB and Fan Hub with 3 pin connector is ilalagay sa Motherboard Hub?
Ano yung ha-02c? Please read yung manual sir just to be sure. And if proper 3 pin connector then goods na ilagayan sa 3 pin argb ng mobo hehe
@@miketech422 aRGB and Fun controller sir ng ID Cooling, before kc nako-control ko sa remote biglang hindi na. Okay
@@allenyeager. basta make sure to plug lng sa tama na pin. May labels nman dyan. Mas ok kpag software controlled mga fans lods
Ask lang po saang header po ikakabit yung para sa pwm split header? Asrock B450m steel legend po mobo ko.
Sa mobo lods meron 4 pin na fan headers po. Kahit saan na pwm header pwede
@@miketech422 Nasa may bottom part po siya ng mobo diba?
@@Hazard.01 yes po meron sa baba, side and taas usually. Skin 6 kase headers ko ata