Alfa Romeo Giulietta Front Brake Pads Changing

Поділитися
Вставка
  • Опубліковано 6 вер 2024
  • In this Alfa Romeo Giulietta video we look how to replace/how do I change the front brake pads.
    #Giulietta
    #Vialettotony
    Like & Subscribe for other how to & repair videos & things you wish you knew earlier, that are up already, or getting posted soon. Battery replacement, Trunk / Boot Wiring Looms, Air / Cabin Pollen Filter, MAF Mass Air Flow Sensor Fix Cleaning, PCV valve, Fuel / Gas Filter, Steering Fault Codes Fixed, Passenger Airbag Light, Electric Windows, Anti Roll / Sway bar Bushes, Drop Links, Brake Discs, Pads, Brake Fluid Flush, Springs, MOT Preparation, and more. 2.0 JTDM 170
    In questo video vediamo come sostituire/come si cambiano le pastiglie dei freni anteriori.
    Metti mi piace e iscriviti per altri video su come riparare e cose che avresti voluto sapere prima, che sono già attivi o che verranno pubblicati presto. Sostituzione della batteria, cablaggio del bagagliaio / baule, filtro antipolline aria / cabina, pulizia del sensore di flusso d'aria di massa MAF, valvola PCV, filtro del carburante / gas, codici di errore dello sterzo corretti, luce dell'airbag del passeggero, alzacristalli elettrici, boccole della barra antirollio / antirollio, Drop Links, dischi freno, pastiglie, lavaggio del liquido dei freni, molle
    Dans cette vidéo, nous examinons comment remplacer/comment changer les plaquettes de frein avant.
    Aimez et abonnez-vous pour d'autres vidéos et réparations que vous auriez aimé savoir plus tôt, qui sont déjà en ligne ou qui seront bientôt publiées. Remplacement de la batterie, faisceaux de câblage de coffre/coffre, filtre à pollen air/cabine, nettoyage du capteur de débit d'air massique MAF, valve PCV, filtre à carburant/gaz, codes d'erreur de direction corrigés, éclairage d'airbag passager, vitres électriques, bagues de barre stabilisatrice/anti-roulis, Liens de chute, disques de frein, plaquettes, rinçage du liquide de frein, ressorts,
    W tym filmie przyjrzymy się, jak wymienić/jak wymienić przednie klocki hamulcowe.
    Polub i zasubskrybuj, aby dowiedzieć się, jak naprawiać i naprawiać filmy i rzeczy, które chciałbyś wiedzieć wcześniej, które są już gotowe lub zostaną wkrótce opublikowane. Wymiana baterii, wiązki przewodów bagażnika/buta, filtr przeciwpyłkowy powietrza/kabiny, czyszczenie czujnika masowego przepływu powietrza MAF, czyszczenie zaworu PCV, filtr paliwa/gazu, naprawienie kodów błędów układu kierowniczego, oświetlenie poduszki powietrznej pasażera, elektryczne szyby, tuleje stabilizatorów/stabilizatorów, Linki, tarcze hamulcowe, klocki, płyn hamulcowy, sprężyny
    In deze video bekijken we hoe ik de voorremblokken moet vervangen/verwisselen.
    Like & Abonneer voor andere video's en dingen die je eerder had willen weten, die al online staan ​​of die binnenkort worden gepost. Batterijvervanging, Kofferbak/Bootkabelboom, Lucht/Cabine Pollen Filter, MAF Luchtmassameter Vaste Reiniging, PCV-klep, Brandstof/Gasfilter, Stuurfoutcodes Vast, Passagiers-airbagverlichting, Elektrische Ramen, Stabilisator-/Sway bar Struiken, Drop Links, remschijven, blokken, remvloeistofspoeling, veren
    Se aftó to vínteo exetázoume pós na antikatastíso/pós allázo ta brostiná takákia frénon.
    Mou arései & Engrafeíte pós na & episkevázete vínteo kai prágmata pou thélete na gnorízate norítera. Antikatástasi batarías, argaleioí kalodíosis/portmpankáz, Fíltro gýris aéra/kampínas, Katharismós aisthitíra MAF mazikís roís aéra, Fíltro kafsímou/aeríou, Diorthóthikan oi kodikoí vlávis diéfthynsis, Thámnoi prostasías apó rolá/talántefsi, elatíria
    In diesem Video sehen wir, wie man die vorderen Bremsbeläge ersetzt / wie ich sie wechsel.
    Liken und abonnieren Sie, wie Sie Videos und Dinge reparieren, die Sie gerne früher wissen würden. Batteriewechsel, Kofferraum-/Kofferraumkabelbäume, Luft-/Kabine-Pollenfilter, MAF-Luftmassenmesser-Reinigung behoben, Kraftstoff-/Gasfilter, Lenkungsfehlercodes behoben, Stabilisator-/Stabilisatorbuchsen, Federn
    En este video vemos cómo reemplazar / cómo cambio las pastillas de freno delanteras.
    Me gusta y suscríbete cómo y repara videos y cosas que desearías saber antes. Reemplazo de batería, cables de cableado del maletero / maletero, filtro de polen de aire / cabina, limpieza fija del sensor de flujo de aire masivo MAF, filtro de combustible / gas, códigos de falla de dirección fijos, bujes de barra estabilizadora / estabilizadora, resortes
    Ebben a videóban az első fékbetétek cseréjét/cseréjét nézzük meg.
    Iratkozzon fel az elemcserére, a csomagtartó/csomagtartó huzalozó szövőszékekre, a levegő/kabin pollenszűrőjére, a MAF légáramlás -érzékelő javításának tisztítására, az üzemanyag-/gázszűrőre, a kormányzási hibakódokra, a kanyarodásgátló/lengéscsillapító perselyekre, rugókra
    Kono bideode wa, furontoburēkipaddo no kōkan hōhō/ kōkan hōhō o mite ikimasu. Batterī kōkan, toranku/ būtsu haisen rūmu, ea/ kyabin kafun firutā, MAF masueafurōsensāfikkusukurīningu, nenryō/ gasufirutā, sutearingufōrutokōdo shūsei, anchirōru/ suu~eibābusshu, supuringu o kōdoku suru

КОМЕНТАРІ • 57

  • @ibrahimulker1294
    @ibrahimulker1294 8 місяців тому +3

    Merhaba Wialetto Tony Ben Türkiye den Baybars Alfa 2011 model Alfa Romeo Giuilette 1.4 MA 170 lik aracım var, çok güzel ve yararlı bir video çekmişsin eline sağlık, sizi izleyerek bende balata ve disk leri değiştirdim. Selamlar Kolay gelsin. Güvende Kalın..

  • @pavw5508
    @pavw5508 2 роки тому +4

    Enjoyed it. I always find those types of work almost therapeutic. Thanks for the video

  • @Clarkie8590
    @Clarkie8590 2 роки тому +3

    Very timely, did my pads and discs today.
    You've made it look far easier 😅

  • @SturbokSensei
    @SturbokSensei 2 роки тому +4

    Great video once again! Just for funsies next time you are pushing back the piston open the bleed nipple while you are pushing it in so all the blackened fluid that has been in contact with the piston seals etc won't go up into the system. You will be surprised how black the fluid that sits in the calipers gets in just a few years... Thanks again for making servicing content for the G, just used your front seat removal video yesterday!

    • @vialettotony
      @vialettotony  2 роки тому

      Hi Sturbok. Great to hear from you. Some useful advice for sure. I wanted to use the laptop to bleed the brakes as you saw, so wanted to ensure there was extra fluid in the reservoir. As I changed my brake fluid a couple of months ago, I wasn’t too worried about dirty fluid, but you’re option would definitely add value 👍
      All the best.

  • @petersoutham8621
    @petersoutham8621 10 місяців тому +1

    Brilliant vid tony. Did you do one showing how to refit the plastic lugs on the rear of the handle.

    • @vialettotony
      @vialettotony  9 місяців тому

      Hi, not sure I understand correctly. Can you be more specific? All the best 👍

  • @AJamespaver
    @AJamespaver 2 роки тому +1

    I've been waiting to do this job (and the discs), but wanted your video first to explain clearly how to do it! Thanks for the great video!

    • @vialettotony
      @vialettotony  2 роки тому

      Hi James. The disc video will be out next Thursday if it helps??
      Thanks for watching and commenting. Really appreciated.
      All the best. 👍

    • @AJamespaver
      @AJamespaver 2 роки тому +1

      @@vialettotony Perfect yeh I'll be watching 👍

  • @hendriclash9343
    @hendriclash9343 2 роки тому +1

    you´re videos are very helpful. I changed a lot of things on my Giulietta QV with confidence because of you

  • @Red_Ford
    @Red_Ford 2 роки тому +1

    I finally bought my Giulietta with petrol engine 1.4 120KM 🤩

    • @vialettotony
      @vialettotony  2 роки тому +1

      Hey Red Ford. That’s great. Congratulations and welcome to the family. 👐🏼👍🍻

  • @seanmann7278
    @seanmann7278 Рік тому +1

    Great video Tony did my front brake disks and pads this morning keep making the great videos

  • @aurisd.4456
    @aurisd.4456 2 роки тому +1

    thanks for all these alfa videos, I got one to myself Tb version

  • @M4hunter1234
    @M4hunter1234 2 роки тому +1

    Just the video I need! Doing mine next week

  • @Megane-kun147
    @Megane-kun147 2 роки тому +3

    These videos are a God send. Thank you so much for making them, they're super helpful. One question though: Will you make a video on how to flush the radiator system in the future? Also if the engine coolant is on the minimum line would it be advisable to mix in a little bit of distilled water into the reservoir? Keep up the amazing content mate.🙏🏻 Love from South Africa.💙

    • @vialettotony
      @vialettotony  2 роки тому +1

      Hi Megane-kun. Yes, I’m hoping to do this. I need to get my cambelt changed, so considered leaving it as it will be changed then. Hopefully I’ll get around to it soon.
      Regarding topping up the coolant, for the cold temperatures we get in the UK, I always like to keep the ratios factory, but for SA temps, you’d probably get away with adding distilled water as an option.
      Thanks for your comments, and watching and subscribing. Really appreciate it.
      All the best. 👍

  • @ismailgullu4143
    @ismailgullu4143 2 дні тому

    I couldn't get the reason of rubbing on your disks. Was the reason is not bleeding calipers by compressing piston? If I bleed by compressing caliper will it still rub on disks or rubbing is not that important to care about?
    Thanks in advance.

  • @stahlhart8998
    @stahlhart8998 2 роки тому +1

    You are lucky that u dont have the Brembos....whatever u do there its way way too expensive...awesome video as always. Stay safe

    • @vialettotony
      @vialettotony  2 роки тому +1

      Thanks Stahl. Appreciate it as always. Keep healthy. 👍

    • @manmodel5361
      @manmodel5361 2 роки тому +1

      Hi do you have qv version?

    • @vialettotony
      @vialettotony  2 роки тому

      @@manmodel5361 no it’s a Veloce spec.

  • @callum-Watson
    @callum-Watson 2 роки тому +1

    What an excellent video

  • @johnwhalley223
    @johnwhalley223 2 роки тому +1

    Thanks for another great video

  • @semeng63
    @semeng63 Рік тому +1

    Nice work 👍

  • @ismailgullu4143
    @ismailgullu4143 12 днів тому +1

    hello, on owners manual i see that front disks are self ventilated. In this case what was the reason u use not ventilated model disks?

    • @vialettotony
      @vialettotony  12 днів тому

      The Cloverleaf has drilled slotted vented disks, but the Veloce has only vented if that’s the difference you mean. Different power cars requires different stopping power. All the best 👍

    • @ismailgullu4143
      @ismailgullu4143 12 днів тому

      @@vialettotony i’ve seen some providers that suggest ventilateds for even 1.6jtdm. Money bait i guess. thanks a lot.

  • @GTakos89
    @GTakos89 2 роки тому +1

    Another great video Tony !

  • @ibrahimulker1294
    @ibrahimulker1294 8 місяців тому +1

    Qual è il liquido che metti sul bordo della pastiglia freno? Grazie in anticipo, buon lavoro, ben fatto. Saluti dalla Turchia

    • @vialettotony
      @vialettotony  8 місяців тому

      Hi. Thanks for watching and happy to help. It’s copper grease on the pad. Helps stop squeaking on the brakes. Only the back though obviously. All the best 👍

  • @valterreboredo
    @valterreboredo 2 роки тому +1

    Great video as always! 👌

  • @benimrehberim12
    @benimrehberim12 2 роки тому +1

    Very nice

  • @kyle1282
    @kyle1282 2 роки тому +1

    Super useful video - could have done with this last august as I lost my rag with it and had the local garage do it instead! Looking forward to more!
    As a side note, where do you get all your torque specs from?

    • @vialettotony
      @vialettotony  2 роки тому

      Thanks Kyle. Appreciate the feedback.
      I have a spec sheet with most elements on that I “sourced” a while back.
      Thanks for watching and subscribing if you have. Really appreciate it.
      All the best 👍

  • @FISHERN123
    @FISHERN123 2 роки тому +2

    What diag software are you using?

    • @vialettotony
      @vialettotony  2 роки тому

      Hi Nigel. It’s multiecuscan. Have a look on the channel. Theres a video about connecting to the cars OBD port which details it.
      Thanks for watching. Really appreciate it 👍

  • @marchutchings8834
    @marchutchings8834 2 роки тому +1

    Hi Tony, why not paint the calipers red or orange mate???

    • @vialettotony
      @vialettotony  2 роки тому

      Haha. Hi Marc. Yep, that’s another video that I have planned already. 😉. Looking forward to shooting that one. I need to do control arms, bushes and rear brakes first…. But I’ll definitely be painting the callipers at some time 👍

  • @manmodel5361
    @manmodel5361 2 роки тому +1

    Hi. Tell me please,how much diesel/100 km?
    And what you think: should I take diesel 2.0 or 1.75 tbi?
    Thanks.

    • @vialettotony
      @vialettotony  2 роки тому

      Hey Man Model. Sorry for not responding to this comment. All the best.

    • @manmodel5361
      @manmodel5361 2 роки тому +1

      @@vialettotony Don’t worry, you answered in another video.
      Deep doing videos,it’s very informative and helpful!

  • @ExplorationsParanormales
    @ExplorationsParanormales Рік тому +1

    hello ! What cable are you using to connect? and what is the version of multiecuscan? thank you so much.

    • @ExplorationsParanormales
      @ExplorationsParanormales Рік тому +1

      Is there another way to drain the fluid?

    • @vialettotony
      @vialettotony  Рік тому

      Hi. There’s a link to the cable in the description on another video. I’ll see if I can find it for you. I’m also running the most current version. Can’t remember what it is at the moment though and the Mrs has the laptop. All the best 👍

    • @vialettotony
      @vialettotony  Рік тому

      Here’s the link to the video with the link for the cable in the description
      m.ua-cam.com/video/rPSYG8sgVXQ/v-deo.html

    • @vialettotony
      @vialettotony  Рік тому

      @@ExplorationsParanormales you can do this manually. You just need someone to help.
      m.ua-cam.com/video/nF8ZPLhAqRM/v-deo.html

    • @vialettotony
      @vialettotony  Рік тому

      Here’s a link to a video for it 👍

  • @WolfmanDOM
    @WolfmanDOM Рік тому

    Hi Tony. Just A quick one. How important is the Bleeding through the ECU? I don’t have any obd reader kit. But would love to give this a go myself.

    • @vialettotony
      @vialettotony  Рік тому +1

      Hi Dom. Not important at all. It can be done the traditional way. There’s a video on changing the brake fluid where I do the normal bleeding. Hope that helps. All the best 👍

    • @ardonjr
      @ardonjr Рік тому +1

      @@vialettotony Thanks, was looking for this answer!

  • @mastertabsguitarandmore3850
    @mastertabsguitarandmore3850 2 роки тому +1

    How many NM for the 7 bullon ?

  • @marchutchings8834
    @marchutchings8834 2 роки тому +1

    sorry I meant yellow??